Provide authzid in scream response

Travis CI: Cosmetic changes to Riak setup commands
Travis CI: Revert to checking for skipped tests
2016-03-30 16:08:04 +02:00 · 2016-03-30 01:15:12 +02:00 · 2016-03-30 01:02:27 +02:00 · 2016-03-29 19:40:20 +02:00 · 2016-03-29 15:45:57 +02:00 · 2016-03-29 15:45:48 +02:00
361 changed files with 85972 additions and 85145 deletions
@@ -0,0 +1,15 @@
+> What version of ejabberd are you using?
+
+
+
+> What operating system (version) are you using?
+
+
+
+> How did you install ejabberd (source, package, distribution)?
+
+
+
+> What did not work as expected? Are there error messages in the log? What
+> was the unexpected behavior? What was the expected result?
+
@@ -0,0 +1,20 @@
+We are open to contributions for ejabberd, as GitHub pull requests (PR).
+Here are a few points to consider before submitting your PR. (You can
+remove the whole text after reading.)
+
+1. Does this PR address an issue? Please reference it in the PR
+   description.
+
+2. Have you properly described the proposed change?
+
+3. Please make sure the change is atomic and does only touch the needed
+   modules. If you have other changes/fixes to provide, please submit
+   them as separate PRs.
+
+4. If your change or new feature involves storage backends, did you make
+   sure your change works with all backends?
+
+5. Do you provide tests? How can we check the behavior of the code?
+
+6. Did you consider documentation changes in the
+   processone/docs.ejabberd.im repository?
@@ -4,9 +4,12 @@
 *~
 \#*#
 .#*
+.edts
+*.dump
 /Makefile
 /config.log
 /config.status
+/configure
 /aclocal.m4
 /contrib/extract_translations/extract_translations.beam
 /*.cache
@@ -24,11 +27,22 @@
 /doc/*.toc
 /doc/contributed_modules.tex
 /doc/version.tex
-/ebin/*.beam
-/ebin/ejabberd.app
-/include/XmppAddr.hrl
+/ebin/
+/ejabberd.init
+/ejabberdctl.example
+XmppAddr.hrl
+/rel/ejabberd/
 /src/XmppAddr.asn1db
 /src/XmppAddr.erl
 /src/ejabberd.app.src
 /src/eldap_filter_yecc.erl
 /vars.config
+/dialyzer/
+/test/*.beam
+/test/*.ctc
+/logs/
+/priv/sql
+/rel/ejabberd
+/_build
+/mnesiadb
+/.rebar
@@ -0,0 +1,70 @@
+language: erlang
+
+otp_release:
+  - 17.5
+  - 18.2.1
+
+services:
+  - riak
+  - redis-server
+
+before_install:
+  #
+  # We need MySQL 5.6 or newer in order to get support for FULLTEXT indexes
+  # with InnoDB. As soon as Travis ships that version, the following lines
+  # (except for the "apt-get update" call) can go away.
+  #
+  # See: https://github.com/travis-ci/travis-ci/issues/1986
+  #
+  - sudo sed -i -e s/table_cache/table_open_cache/ -e /log_slow_queries/d /etc/mysql/my.cnf
+  - sudo apt-key adv --import .travis/mysql_repo_key.asc
+  - sudo add-apt-repository 'deb http://repo.mysql.com/apt/ubuntu/ precise mysql-5.6'
+  - sudo apt-get -qq update
+  - sudo apt-get -qq -o Dpkg::Options::=--force-confold install mysql-server-5.6
+  # /END MYSQL 5.6
+  - pip install --user coveralls-merge
+
+install:
+  - sudo apt-get -qq install libexpat1-dev libyaml-dev libpam0g-dev libsqlite3-dev
+
+before_script:
+  # Ulimit: See Travis-CI issue report: https://github.com/travis-ci/travis-ci/issues/3328
+  - echo 'ulimit -n 4096' > riak
+  - sudo mv riak /etc/default/riak
+  - mkdir "$PWD/ebin"
+  - echo "[{riak_kv, [{add_paths, [\"$PWD/ebin/\"]}]}]." > advanced.config
+  - sudo mv advanced.config /etc/riak/advanced.config
+  - sudo service riak restart
+  - sudo riak-admin wait-for-service riak_kv 'riak@127.0.0.1'
+  - sudo riak-admin test
+  - mysql -u root -e "CREATE USER 'ejabberd_test'@'localhost' IDENTIFIED BY 'ejabberd_test';"
+  - mysql -u root -e "CREATE DATABASE ejabberd_test;"
+  - mysql -u root -e "GRANT ALL ON ejabberd_test.* TO 'ejabberd_test'@'localhost';"
+  - psql -U postgres -c "CREATE USER ejabberd_test WITH PASSWORD 'ejabberd_test';"
+  - psql -U postgres -c "CREATE DATABASE ejabberd_test;"
+  - psql -U postgres -c "GRANT ALL PRIVILEGES ON DATABASE ejabberd_test TO ejabberd_test;"
+
+script:
+  - ./autogen.sh
+  - ./configure --prefix=/tmp/ejabberd --enable-all --disable-odbc
+  - make
+  - make install
+  - make xref
+  - sed -i -e 's/ct:pal/ct:log/' test/suite.erl
+  - ln -sf ../sql priv/
+  - escript ./rebar skip_deps=true ct -v
+  - grep -q 'TEST COMPLETE, \([[:digit:]]*\) ok, .* of \1 ' logs/raw.log
+
+after_script:
+  - find logs -name suite.log -exec cat '{}' ';'
+
+after_failure:
+  # Try checking Riak database logs
+  - tail -n 100000 /var/log/riak/*.log
+  - find logs -name ejabberd.log -exec cat '{}' ';'
+
+after_success:
+  - coveralls-merge erlang.json
+
+notifications:
+  email: false
@@ -0,0 +1,96 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.9 (SunOS)
+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+=443I
+-----END PGP PUBLIC KEY BLOCK-----
@@ -4,8 +4,8 @@ with the OpenSSL library and distribute the resulting binary.
 		    GNU GENERAL PUBLIC LICENSE
 		       Version 2, June 1991

- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

@@ -306,9 +306,9 @@ the "copyright" line and a pointer to where the full notice is found.
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.


 Also add information on how to contact you by electronic and paper mail.
@@ -11,9 +11,15 @@ DESTDIR =
 # /etc/ejabberd/
 ETCDIR = $(DESTDIR)@sysconfdir@/ejabberd

+# /bin/
+BINDIR = $(DESTDIR)@bindir@
+
 # /sbin/
 SBINDIR = $(DESTDIR)@sbindir@

+# /lib/
+LIBDIR =  $(DESTDIR)@libdir@
+
 # /lib/ejabberd/
 EJABBERDDIR = $(DESTDIR)@libdir@/ejabberd

@@ -40,6 +46,9 @@ SODIR = $(PRIVDIR)/lib
 # /usr/lib/ejabberd/priv/msgs
 MSGSDIR = $(PRIVDIR)/msgs

+# /usr/lib/ejabberd/priv/sql
+SQLDIR = $(PRIVDIR)/sql
+
 # /var/lib/ejabberd/
 SPOOLDIR = $(DESTDIR)@localstatedir@/lib/ejabberd

@@ -88,24 +97,80 @@ update:
 	rm -rf deps/.built
 	$(REBAR) update-deps && :> deps/.got

+xref: all
+	$(REBAR) skip_deps=true xref
+
+
 translations:
 	contrib/extract_translations/prepare-translation.sh -updateall

-doc:
-	echo making $$target in doc; \
-	(cd doc && $(MAKE) $$target) || exit 1
-
 edoc:
 	$(ERL) -noinput +B -eval \
        'case edoc:application(ejabberd, ".", []) of ok -> halt(0); error -> halt(1) end.'

 spec:
 	$(ERL) -noinput +B -pa ebin -pa deps/*/ebin -eval \
-	'case xml_gen:compile("tools/xmpp_codec.spec") of ok -> halt(0); _ -> halt(1) end.'
+	'case fxml_gen:compile("tools/xmpp_codec.spec") of ok -> halt(0); _ -> halt(1) end.'

-DLLs := $(wildcard deps/*/priv/*.so) $(wildcard deps/*/priv/lib/*.so)
+JOIN_PATHS=$(if $(wordlist 2,1000,$(1)),$(firstword $(1))/$(call JOIN_PATHS,$(wordlist 2,1000,$(1))),$(1))

-install: all
+VERSIONED_DEP=$(if $(DEP_$(1)_VERSION),$(DEP_$(1)_VERSION),$(1))
+
+ELIXIR_TO_DEST=$(LIBDIR) $(call VERSIONED_DEP,$(word 2,$(1))) $(wordlist 5,1000,$(1))
+DEPS_TO_DEST=$(LIBDIR) $(call VERSIONED_DEP,$(word 2,$(1))) $(wordlist 3,1000,$(1))
+MAIN_TO_DEST=$(LIBDIR) $(call VERSIONED_DEP,ejabberd) $(1)
+TO_DEST_SINGLE=$(if $(subst XdepsX,,X$(word 1,$(1))X),$(call MAIN_TO_DEST,$(1)),$(if $(subst XlibX,,X$(word 3,$(1))X),$(call DEPS_TO_DEST,$(1)),$(call ELIXIR_TO_DEST,$(1))))
+TO_DEST=$(foreach path,$(1),$(call JOIN_PATHS,$(call TO_DEST_SINGLE,$(subst /, ,$(path)))))
+
+FILTER_DIRS=$(foreach path,$(1),$(if $(wildcard $(path)/*),,$(path)))
+FILES_WILDCARD=$(call FILTER_DIRS,$(foreach w,$(1),$(wildcard $(w))))
+
+ifeq ($(MAKECMDGOALS),copy-files-sub)
+
+DEPS:=$(sort $(shell $(REBAR) list-deps|$(SED) -e '/^=/d;s/ .*//'))
+
+DEPS_FILES=$(call FILES_WILDCARD,$(foreach DEP,$(DEPS),deps/$(DEP)/ebin/*.beam deps/$(DEP)/ebin/*.app deps/$(DEP)/priv/* deps/$(DEP)/priv/lib/* deps/$(DEP)/priv/bin/* deps/$(DEP)/include/*.hrl deps/$(DEP)/lib/*/ebin/*.beam deps/$(DEP)/lib/*/ebin/*.app))
+DEPS_FILES_FILTERED=$(filter-out %/epam deps/elixir/ebin/elixir.app,$(DEPS_FILES))
+DEPS_DIRS=$(sort deps/ $(foreach DEP,$(DEPS),deps/$(DEP)/) $(dir $(DEPS_FILES)))
+
+MAIN_FILES=$(filter-out %/configure.beam,$(call FILES_WILDCARD,ebin/*.beam ebin/*.app priv/msgs/*.msg priv/lib/* include/*.hrl))
+MAIN_DIRS=$(sort $(dir $(MAIN_FILES)) priv/bin priv/sql)
+
+define DEP_VERSION_template
+DEP_$(1)_VERSION:=$(shell $(SED) -e '/vsn/!d;s/.*, *"/$(1)-/;s/".*//' $(2) 2>/dev/null)
+endef
+
+$(foreach DEP,$(DEPS),$(eval $(call DEP_VERSION_template,$(DEP),deps/$(DEP)/ebin/$(DEP).app)))
+$(eval $(call DEP_VERSION_template,ejabberd,ebin/ejabberd.app))
+
+define COPY_template
+$(call TO_DEST,$(1)): $(1) $(call TO_DEST,$(dir $(1))) ; $$(INSTALL) -m 644 $(1) $(call TO_DEST,$(1))
+endef
+
+$(foreach file,$(DEPS_FILES_FILTERED) $(MAIN_FILES),$(eval $(call COPY_template,$(file))))
+
+$(sort $(call TO_DEST,$(MAIN_DIRS) $(DEPS_DIRS))):
+	$(INSTALL) -d $@
+
+$(call TO_DEST,deps/p1_pam/priv/bin/epam): $(LIBDIR)/%: deps/p1_pam/priv/bin/epam $(call TO_DEST,deps/p1_pam/priv/bin/)
+	$(INSTALL) -m 750 $(O_USER) $< $@
+
+$(call TO_DEST,priv/sql/lite.sql): sql/lite.sql $(call TO_DEST,priv/sql)
+	$(INSTALL) -m 644 $< $@
+
+$(call TO_DEST,priv/bin/captcha.sh): tools/captcha.sh $(call TO_DEST,priv/bin)
+	$(INSTALL) -m 750 $(O_USER) $< $@
+
+copy-files-sub2: $(call TO_DEST,$(DEPS_FILES) $(MAIN_FILES) priv/bin/captcha.sh priv/sql/lite.sql)
+
+endif
+
+copy-files:
+	$(MAKE) copy-files-sub
+
+copy-files-sub: copy-files-sub2
+
+install: all copy-files
 	#
 	# Configuration files
 	$(INSTALL) -d -m 750 $(G_USER) $(ETCDIR)
@@ -114,6 +179,7 @@ install: all
 		|| $(INSTALL) -b -m 640 $(G_USER) ejabberd.yml.example $(ETCDIR)/ejabberd.yml
 	$(SED) -e "s*{{rootdir}}*@prefix@*" \
 		-e "s*{{installuser}}*@INSTALLUSER@*" \
+		-e "s*{{bindir}}*@bindir@*" \
 		-e "s*{{libdir}}*@libdir@*" \
 		-e "s*{{sysconfdir}}*@sysconfdir@*" \
 		-e "s*{{localstatedir}}*@localstatedir@*" \
@@ -128,6 +194,11 @@ install: all
 	# Administration script
 	[ -d $(SBINDIR) ] || $(INSTALL) -d -m 755 $(SBINDIR)
 	$(INSTALL) -m 550 $(G_USER) ejabberdctl.example $(SBINDIR)/ejabberdctl
+	# Elixir binaries
+	[ -d $(BINDIR) ] || $(INSTALL) -d -m 755 $(BINDIR)
+	[ -f deps/elixir/bin/iex ] && $(INSTALL) -m 550 $(G_USER) deps/elixir/bin/iex $(BINDIR)/iex || true
+	[ -f deps/elixir/bin/elixir ] && $(INSTALL) -m 550 $(G_USER) deps/elixir/bin/elixir $(BINDIR)/elixir || true
+	[ -f deps/elixir/bin/mix ] && $(INSTALL) -m 550 $(G_USER) deps/elixir/bin/mix $(BINDIR)/mix || true
 	#
 	# Init script
 	$(SED) -e "s*@ctlscriptpath@*$(SBINDIR)*" \
@@ -135,31 +206,6 @@ install: all
 		> ejabberd.init
 	chmod 755 ejabberd.init
 	#
-	# Binary Erlang files
-	$(INSTALL) -d $(BEAMDIR)
-	$(INSTALL) -m 644 ebin/*.app $(BEAMDIR)
-	$(INSTALL) -m 644 ebin/*.beam $(BEAMDIR)
-	$(INSTALL) -m 644 deps/*/ebin/*.app $(BEAMDIR)
-	$(INSTALL) -m 644 deps/*/ebin/*.beam $(BEAMDIR)
-	rm -f $(BEAMDIR)/configure.beam
-	#
-	# ejabberd header files
-	$(INSTALL) -d $(INCLUDEDIR)
-	$(INSTALL) -m 644 include/*.hrl $(INCLUDEDIR)
-	$(INSTALL) -m 644 deps/*/include/*.hrl $(INCLUDEDIR)
-	#
-	# Binary C programs
-	$(INSTALL) -d $(PBINDIR)
-	$(INSTALL) -m 750 $(O_USER) tools/captcha.sh $(PBINDIR)
-	#
-	# Binary system libraries
-	$(INSTALL) -d $(SODIR)
-	$(INSTALL) -m 644 $(DLLs) $(SODIR)
-	#
-	# Translated strings
-	$(INSTALL) -d $(MSGSDIR)
-	$(INSTALL) -m 644 priv/msgs/*.msg $(MSGSDIR)
-	#
 	# Spool directory
 	$(INSTALL) -d -m 750 $(O_USER) $(SPOOLDIR)
 	$(CHOWN_COMMAND) -R @INSTALLUSER@ $(SPOOLDIR) >$(CHOWN_OUTPUT)
@@ -178,19 +224,18 @@ install: all
 	#
 	# Documentation
 	$(INSTALL) -d $(DOCDIR)
-	$(INSTALL) -m 644 doc/dev.html $(DOCDIR)
-	$(INSTALL) -m 644 doc/guide.html $(DOCDIR)
-	$(INSTALL) -m 644 doc/*.png $(DOCDIR)
-	$(INSTALL) -m 644 doc/*.txt $(DOCDIR)
-	[ -f doc/guide.pdf ] \
-		&& $(INSTALL) -m 644 doc/guide.pdf $(DOCDIR) \
-		|| echo "No doc/guide.pdf was built"
+	[ -f doc/guide.html ] \
+		&& $(INSTALL) -m 644 doc/guide.html $(DOCDIR) \
+		|| echo "Documentation not included in sources"
 	$(INSTALL) -m 644 COPYING $(DOCDIR)

 uninstall: uninstall-binary

 uninstall-binary:
 	rm -f  $(SBINDIR)/ejabberdctl
+	rm -f  $(BINDIR)/iex
+	rm -f  $(BINDIR)/elixir
+	rm -f  $(BINDIR)/mix
 	rm -fr $(DOCDIR)
 	rm -f  $(BEAMDIR)/*.beam
 	rm -f  $(BEAMDIR)/*.app
@@ -202,6 +247,8 @@ uninstall-binary:
 	rm -fr $(SODIR)
 	rm -f  $(MSGSDIR)/*.msgs
 	rm -fr $(MSGSDIR)
+	rm -f  $(SQLDIR)/*.sql
+	rm -fr $(SQLDIR)
 	rm -fr $(PRIVDIR)
 	rm -fr $(EJABBERDDIR)

@@ -283,8 +330,12 @@ test:
 	@echo "************************** NOTICE ***************************************"
 	@cat test/README
 	@echo "*************************************************************************"
+	@cd priv && ln -sf ../sql
 	$(REBAR) skip_deps=true ct

-.PHONY: src doc edoc dialyzer Makefile TAGS clean clean-rel distclean rel \
+quicktest:
+	$(REBAR) skip_deps=true ct suites=elixir
+
+.PHONY: src edoc dialyzer Makefile TAGS clean clean-rel distclean rel \
 	install uninstall uninstall-binary uninstall-all translations deps test spec \
-	erlang_plt deps_plt ejabberd_plt
+	quicktest erlang_plt deps_plt ejabberd_plt
@@ -1,176 +0,0 @@
-
-include Makefile.inc
-
-ALL : build
-
-REL=..\release
-EREL=$(REL)\ejabberd-$(EJABBERD_VERSION)
-EBIN_DIR=$(EREL)\ebin
-SRC_DIR=$(EREL)\src
-PRIV_DIR=$(EREL)\priv
-SO_DIR=$(EREL)
-MSGS_DIR=$(EREL)\msgs
-WIN32_DIR=$(EREL)\win32
-DOC_DIR=$(EREL)\doc
-
-NSIS_SCRIPT=win32\ejabberd.nsi
-NSIS_HEADER=win32\ejabberd.nsh
-
-installer : $(NSIS_SCRIPT) $(NSIS_HEADER)
-	makensis $(NSIS_SCRIPT)
-
-$(NSIS_HEADER) : Makefile.inc
-	echo !define OUTFILEDIR "..\$(REL)" >$(NSIS_HEADER)
-	echo !define TESTDIR "..\$(REL)\ejabberd-$(EJABBERD_VERSION)" >>$(NSIS_HEADER)
-	echo !define VERSION "$(EJABBERD_VERSION)" >>$(NSIS_HEADER)
-
-release_clean :
-	if exist $(REL) rd /s /q $(REL)
-
-
-release : build release_clean
-	mkdir $(REL)
-	mkdir $(EREL)
-	mkdir $(EBIN_DIR)
-	copy *.beam $(EBIN_DIR)
-	@erase $(EBIN_DIR)\configure.beam
-	copy *.app $(EBIN_DIR)
-	copy *.dll $(SO_DIR)
-	mkdir $(MSGS_DIR)
-	copy msgs\*.msg $(MSGS_DIR)
-	mkdir $(WIN32_DIR)
-	copy win32\ejabberd.cfg $(EREL)
-	copy win32\inetrc $(EREL)
-	copy $(SYSTEMROOT)\system32\libeay32.dll $(EREL)
-	copy $(SYSTEMROOT)\system32\ssleay32.dll $(EREL)
-	copy win32\ejabberd.ico $(WIN32_DIR)
-	mkdir $(SRC_DIR)
-	copy *.app $(SRC_DIR)
-	copy *.erl $(SRC_DIR)
-	copy *.hrl $(SRC_DIR)
-	copy *.c $(SRC_DIR)
-	mkdir $(SRC_DIR)\eldap
-	copy eldap\eldap.* $(SRC_DIR)\eldap
-	copy eldap\ELDAPv3.asn $(SRC_DIR)\eldap
-	mkdir $(SRC_DIR)\mod_irc
-	copy mod_irc\*.erl $(SRC_DIR)\mod_irc
-	copy mod_irc\*.c $(SRC_DIR)\mod_irc
-	mkdir $(SRC_DIR)\mod_muc
-	copy mod_muc\*.erl $(SRC_DIR)\mod_muc
-	mkdir $(SRC_DIR)\mod_pubsub
-	copy mod_pubsub\*.erl $(SRC_DIR)\mod_pubsub
-	mkdir $(SRC_DIR)\mod_proxy65
-	copy mod_proxy65\*.erl $(SRC_DIR)\mod_proxy65
-	copy mod_proxy65\*.hrl $(SRC_DIR)\mod_proxy65
-	mkdir $(SRC_DIR)\stringprep
-	copy stringprep\*.erl $(SRC_DIR)\stringprep
-	copy stringprep\*.c $(SRC_DIR)\stringprep
-	copy stringprep\*.tcl $(SRC_DIR)\stringprep
-	mkdir $(SRC_DIR)\stun
-	copy stun\*.erl $(SRC_DIR)\stun
-	copy stun\*.hrl $(SRC_DIR)\stun
-	mkdir $(SRC_DIR)\tls
-	copy tls\*.erl $(SRC_DIR)\tls
-	copy tls\*.c $(SRC_DIR)\tls
-	mkdir $(SRC_DIR)\ejabberd_zlib
-	copy ejabberd_zlib\*.erl $(SRC_DIR)\ejabberd_zlib
-	copy ejabberd_zlib\*.c $(SRC_DIR)\ejabberd_zlib
-	mkdir $(SRC_DIR)\web
-	copy web\*.erl $(SRC_DIR)\web
-	mkdir $(SRC_DIR)\odbc
-	copy odbc\*.erl $(SRC_DIR)\odbc
-	copy odbc\*.sql $(EREL)
-	mkdir $(DOC_DIR)
-	copy ..\doc\*.txt $(DOC_DIR)
-	copy ..\doc\*.html $(DOC_DIR)
-	copy ..\doc\*.png $(DOC_DIR)
-
-SOURCE = expat_erl.c
-OBJECT = expat_erl.o
-DLL    = expat_erl.dll
-
-build : $(DLL) compile-beam all-recursive
-
-all-recursive :
-	cd eldap
-	nmake -nologo -f Makefile.win32
-	cd ..\mod_irc
-	nmake -nologo -f Makefile.win32
-	cd ..\mod_muc
-	nmake -nologo -f Makefile.win32
-	cd ..\mod_pubsub
-	nmake -nologo -f Makefile.win32
-	cd ..\mod_proxy65
-	nmake -nologo -f Makefile.win32
-	cd ..\stringprep
-	nmake -nologo -f Makefile.win32
-	cd ..\stun
-	nmake -nologo -f Makefile.win32
-	cd ..\tls
-	nmake -nologo -f Makefile.win32
-	cd ..\ejabberd_zlib
-	nmake -nologo -f Makefile.win32
-	cd ..\web
-	nmake -nologo -f Makefile.win32
-	cd ..\odbc
-	nmake -nologo -f Makefile.win32
-	cd ..
-
-compile-beam : XmppAddr.hrl
-	erl -s make all report -noinput -s erlang halt
-
-XmppAddr.hrl : XmppAddr.asn1
-	erlc -bber_bin +der +compact_bit_string +optimize +noobj XmppAddr.asn1
-
-CLEAN : clean-recursive clean-local
-
-clean-local :
-	-@erase $(OBJECT)
-	-@erase $(DLL)
-	-@erase expat_erl.exp
-	-@erase expat_erl.lib
-	-@erase *.beam
-	-@erase XmppAddr.asn1db
-	-@erase XmppAddr.erl
-	-@erase XmppAddr.hrl
-
-clean-recursive :
-	cd eldap
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\mod_irc
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\mod_muc
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\mod_pubsub
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\mod_proxy65
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\stringprep
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\stun
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\tls
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\ejabberd_zlib
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\web
-	nmake -nologo -f Makefile.win32 clean
-	cd ..\odbc
-	nmake -nologo -f Makefile.win32 clean
-	cd ..
-
-distclean : release_clean clean
-	-@erase $(NSIS_HEADER)
-	-@erase Makefile.inc
-
-CC=cl.exe
-CC_FLAGS=-nologo -D__WIN32__ -DWIN32 -DWINDOWS -D_WIN32 -DNT $(EXPAT_FLAG) -MD -Ox -I"$(ERLANG_DIR)\usr\include" -I"$(EI_DIR)\include" -I"$(EXPAT_DIR)\source\lib"
-
-LD=link.exe
-LD_FLAGS=-release -nologo -incremental:no -dll "$(EI_DIR)\lib\ei_md.lib" "$(EI_DIR)\lib\erl_interface_md.lib" "$(EXPAT_LIB)" MSVCRT.LIB kernel32.lib advapi32.lib gdi32.lib user32.lib comctl32.lib comdlg32.lib shell32.lib
-
-$(DLL) : $(OBJECT)
-	$(LD) $(LD_FLAGS) -out:$@ $<
-
-$(OBJECT) : $(SOURCE)
-	$(CC) $(CC_FLAGS) -c -Fo$@ $<
@@ -1,52 +1,174 @@
-ejabberd - High-Performance Enterprise Instant Messaging Server 
+ejabberd Community Edition 
+==========================
+
+[![Build Status](https://travis-ci.org/processone/ejabberd.svg?branch=master)](https://travis-ci.org/processone/ejabberd) [![Hex version](https://img.shields.io/hexpm/v/ejabberd.svg "Hex version")](https://hex.pm/packages/ejabberd)
+
+ejabberd is a distributed, fault-tolerant technology that allows the creation
+of large-scale instant messaging applications. The server can reliably support
+thousands of simultaneous users on a single node and has been designed to
+provide exceptional standards of fault tolerance. As an open source
+technology, based on industry-standards, ejabberd can be used to build bespoke
+solutions very cost effectively.
+
+
+Key Features
+------------
+
+- **Cross-platform**  
+  ejabberd runs under Microsoft Windows and Unix-derived systems such as
+  Linux, FreeBSD and NetBSD.
+
+- **Distributed**  
+  You can run ejabberd on a cluster of machines and all of them will serve the
+  same XMPP domain(s). When you need more capacity you can simply add a new
+  cheap node to your cluster. Accordingly, you do not need to buy an expensive
+  high-end machine to support tens of thousands concurrent users.
+
+- **Fault-tolerant**  
+  You can deploy an ejabberd cluster so that all the information required for
+  a properly working service will be replicated permanently on all nodes. This
+  means that if one of the nodes crashes, the others will continue working
+  without disruption. In addition, nodes also can be added or replaced ‘on
+  the fly’.
+
+- **Administrator-friendly**  
+  ejabberd is built on top of the Open Source Erlang. As a result you do not
+  need to install an external database, an external web server, amongst others
+  because everything is already included, and ready to run out of the box.
+  Other administrator benefits include:
+  - Comprehensive documentation.
+  - Straightforward installers for Linux and Mac OS X.
+  - Web administration.
+  - Shared roster groups.
+  - Command line administration tool.
+  - Can integrate with existing authentication mechanisms.
+  - Capability to send announce messages.
+
+- **Internationalized**  
+  ejabberd leads in internationalization. Hence it is very well suited in a
+  globalized world. Related features are:
+  - Translated to 25 languages.
+  - Support for IDNA.
+
+- **Open Standards**  
+  ejabberd is the first Open Source Jabber server claiming to fully comply to
+  the XMPP standard.
+  - Fully XMPP-compliant.
+  - XML-based protocol.
+  - Many protocols supported.
+
+
+Additional Features
+-------------------
+
+Moreover, ejabberd comes with a wide range of other state-of-the-art features:
+
+- **Modularity**
+  - Load only the modules you want.
+  - Extend ejabberd with your own custom modules.
+
+- **Security**
+  - SASL and STARTTLS for c2s and s2s connections.
+  - STARTTLS and Dialback s2s connections.
+  - Web Admin accessible via HTTPS secure access.
+
+- **Databases**
+  - Internal database for fast deployment (Mnesia).
+  - Native MySQL support.
+  - Native PostgreSQL support.
+  - ODBC data storage support.
+  - Microsoft SQL Server support.
+
+- **Authentication**
+  - Internal authentication.
+  - PAM, LDAP and ODBC.
+  - External authentication script.
+
+- **Others**
+  - Support for virtual hosting.
+  - Compressing XML streams with Stream Compression (XEP-0138).
+  - Statistics via Statistics Gathering (XEP-0039).
+  - IPv6 support both for c2s and s2s connections.
+  - Multi-User Chat module with support for clustering and HTML logging.
+  - Users Directory based on users vCards.
+  - Publish-Subscribe component with support for Personal Eventing.
+  - Support for web clients: HTTP Polling and HTTP Binding (BOSH).
+  - IRC transport.
+  - Component support: interface with networks such as AIM, ICQ and MSN.
+

 Quickstart guide
+----------------

-
-0. Requirements
+### 0. Requirements

 To compile ejabberd you need:
- - GNU Make
- - GCC
- - Libexpat 1.95 or higher
- - Libyaml 1.4 or higher
- - Erlang/OTP R15B or higher.
- - OpenSSL 0.9.8 or higher, for STARTTLS, SASL and SSL encryption.
- - Zlib 1.2.3 or higher, for Stream Compression support
-   (XEP-0138). Optional.
+
+ - GNU Make.
+ - GCC.
+ - Libexpat 1.95 or higher.
+ - Libyaml 0.1.4 or higher.
+ - Erlang/OTP 17.1 or higher.
+ - OpenSSL 1.0.0 or higher, for STARTTLS, SASL and SSL encryption.
+ - Zlib 1.2.3 or higher, for Stream Compression support (XEP-0138). Optional.
 - PAM library. Optional. For Pluggable Authentication Modules (PAM).
- - GNU Iconv 1.8 or higher, for the IRC Transport
-   (mod_irc). Optional. Not needed on systems with GNU Libc.
+ - GNU Iconv 1.8 or higher, for the IRC Transport (mod_irc). Optional. Not
+   needed on systems with GNU Libc.
 - ImageMagick's Convert program. Optional. For CAPTCHA challenges.
- - exmpp 0.9.6 or higher. Optional. For import/export XEP-0227 files. 


-1. Compile and install on *nix systems
+### 1. Compile and install on *nix systems

-To compile ejabberd execute the commands:
-  ./configure
-  make
+To compile ejabberd, execute the following commands.  The first one is only
+necessary if your source tree didn't come with a `configure` script.

-To install ejabberd, run this command with system administrator rights
-(root user):
+    ./autogen.sh
+    ./configure
+    make

-  sudo make install
+To install ejabberd, run this command with system administrator rights (root
+user):
+
+    sudo make install

 These commands will:
- - Install the configuration files in /etc/ejabberd/
- - Install ejabberd binary, header and runtime files in /lib/ejabberd/
- - Install the administration script: /sbin/ejabberdctl
- - Install ejabberd documentation in /share/doc/ejabberd/
- - Create a spool directory: /var/lib/ejabberd/
- - Create a directory for log files: /var/log/ejabberd/
+
+- Install the configuration files in `/etc/ejabberd/`
+- Install ejabberd binary, header and runtime files in `/lib/ejabberd/`
+- Install the administration script: `/sbin/ejabberdctl`
+- Install ejabberd documentation in `/share/doc/ejabberd/`
+- Create a spool directory: `/var/lib/ejabberd/`
+- Create a directory for log files: `/var/log/ejabberd/`


-2. Start ejabberd
+### 2. Start ejabberd

-You can use the ejabberdctl command line administration script to
+You can use the `ejabberdctl` command line administration script to
 start and stop ejabberd. For example:
-  ejabberdctl start
+
+    ejabberdctl start


-For detailed information please refer to the
-ejabberd Installation and Operation Guide
+For detailed information please refer to the ejabberd Installation and
+Operation Guide available online and in the `doc` directory of the source
+tarball.
+
+
+Development
+-----------
+
+In order to assist in the development of ejabberd, and particularly the
+execution of the test suite, a Vagrant environment is available at
+https://github.com/processone/ejabberd-vagrant-dev.
+
+To start ejabberd in development mode from the repository directory, you can
+type a command like:
+
+    EJABBERD_CONFIG_PATH=ejabberd.yml erl -pa ebin -pa deps/*/ebin -pa test -pa deps/elixir/lib/*/ebin/ -s ejabberd
+
+Links
+-----
+
+- Documentation: http://docs.ejabberd.im
+- Community site: https://www.ejabberd.im
+- ejabberd commercial offering and support: https://www.process-one.net/en/ejabberd
@@ -0,0 +1 @@
+README
@@ -1,3 +1,3 @@
 # generate a new autoconf
 aclocal -I m4
-autoconf
+autoconf -f
@@ -0,0 +1,10 @@
+use Mix.Config
+
+# This is standard path in the context of ejabberd release
+config :ejabberd,
+  file: "config/ejabberd.yml",
+  log_path: 'log/ejabberd.log'
+ 
+# Customize Mnesia directory:
+config :mnesia,
+  dir: 'mnesiadb/'
@@ -2,10 +2,12 @@
 # Process this file with autoconf to produce a configure script.

 AC_PREREQ(2.53)
-AC_INIT(ejabberd, community m4_esyscmd([git describe --tags | tr -d '\n']), [ejabberd@process-one.net], [ejabberd])
-REQUIRE_ERLANG_MIN="5.9.1 (Erlang/OTP R15B01)"
+AC_INIT(ejabberd, m4_esyscmd([echo `git describe --tags 2>/dev/null || echo 0.0` | sed 's/-g.*//;s/-/./' | tr -d '\012']), [ejabberd@process-one.net], [ejabberd])
+REQUIRE_ERLANG_MIN="6.1 (Erlang/OTP 17.1)"
 REQUIRE_ERLANG_MAX="9.0.0 (No Max)"

+AC_CONFIG_MACRO_DIR([m4])
+
 # Checks for programs.
 AC_PROG_MAKE_SET
 AC_PROG_INSTALL
@@ -81,14 +83,6 @@ AC_ARG_ENABLE(roster_gateway_workaround,
  *) AC_MSG_ERROR(bad value ${enableval} for --enable-roster-gateway-workaround) ;;
 esac],[roster_gateway_workaround=false])

-AC_ARG_ENABLE(transient_supervisors,
-[AC_HELP_STRING([--enable-transient_supervisors], [use Erlang supervision for transient process (default: no)])],
-[case "${enableval}" in
-  yes) transient_supervisors=true ;;
-  no)  transient_supervisors=false ;;
-  *) AC_MSG_ERROR(bad value ${enableval} for --enable-transient_supervisors) ;;
-esac],[transient_supervisors=false])
-
 AC_ARG_ENABLE(full_xml,
 [AC_HELP_STRING([--enable-full-xml], [use XML features in XMPP stream (ex: CDATA) (default: no, requires XML compliant clients)])],
 [case "${enableval}" in
@@ -106,10 +100,10 @@ AC_ARG_ENABLE(mssql,
 esac],[db_type=generic])

 AC_ARG_ENABLE(all,
-[AC_HELP_STRING([--enable-all], [same as --enable-nif --enable-odbc --enable-mysql --enable-pgsql --enable-pam --enable-zlib --enable-stun --enable-riak --enable-json --enable-iconv --enable-debug --enable-http --enable-lager --enable-tools (useful for Dialyzer checks, default: no)])],
+[AC_HELP_STRING([--enable-all], [same as --enable-odbc --enable-mysql --enable-pgsql --enable-sqlite --enable-pam --enable-zlib --enable-riak --enable-redis --enable-elixir --enable-iconv --enable-debug --enable-tools (useful for Dialyzer checks, default: no)])],
 [case "${enableval}" in
-  yes) nif=true odbc=true mysql=true pgsql=true pam=true zlib=true stun=true riak=true json=true iconv=true debug=true http=true lager=true tools=true ;;
-  no) nif=false odbc=false mysql=false pgsql=false pam=false zlib=false stun=false riak=false json=false iconv=false debug=false http=false lager=false tools=false ;;
+  yes) odbc=true mysql=true pgsql=true sqlite=true pam=true zlib=true riak=true redis=true elixir=true iconv=true debug=true tools=true ;;
+  no) odbc=false mysql=false pgsql=false sqlite=false pam=false zlib=false riak=false redis=false elixir=false iconv=false debug=false tools=false ;;
  *) AC_MSG_ERROR(bad value ${enableval} for --enable-all) ;;
 esac],[])

@@ -121,14 +115,6 @@ AC_ARG_ENABLE(tools,
  *) AC_MSG_ERROR(bad value ${enableval} for --enable-tools) ;;
 esac],[if test "x$tools" = "x"; then tools=false; fi])

-AC_ARG_ENABLE(nif,
-[AC_HELP_STRING([--enable-nif], [replace some functions with C equivalents. Requires Erlang R13B04 or higher (default: no)])],
-[case "${enableval}" in
-  yes) nif=true ;;
-  no)  nif=false ;;
-  *) AC_MSG_ERROR(bad value ${enableval} for --enable-nif) ;;
-esac],[if test "x$nif" = "x"; then nif=false; fi])
-
 AC_ARG_ENABLE(odbc,
 [AC_HELP_STRING([--enable-odbc], [enable pure ODBC support (default: no)])],
 [case "${enableval}" in
@@ -153,6 +139,14 @@ AC_ARG_ENABLE(pgsql,
  *) AC_MSG_ERROR(bad value ${enableval} for --enable-pgsql) ;;
 esac],[if test "x$pgsql" = "x"; then pgsql=false; fi])

+AC_ARG_ENABLE(sqlite,
+[AC_HELP_STRING([--enable-sqlite], [enable SQLite support (default: no)])],
+[case "${enableval}" in
+  yes) sqlite=true ;;
+  no)  sqlite=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-sqlite) ;;
+esac],[if test "x$sqlite" = "x"; then sqlite=false; fi])
+
 AC_ARG_ENABLE(pam,
 [AC_HELP_STRING([--enable-pam], [enable PAM support (default: no)])],
 [case "${enableval}" in
@@ -169,21 +163,29 @@ AC_ARG_ENABLE(zlib,
  *) AC_MSG_ERROR(bad value ${enableval} for --enable-zlib) ;;
 esac],[if test "x$zlib" = "x"; then zlib=true; fi])

-AC_ARG_ENABLE(stun,
-[AC_HELP_STRING([--enable-stun], [enable STUN support (default: no)])],
+AC_ARG_ENABLE(riak,
+[AC_HELP_STRING([--enable-riak], [enable Riak support (default: no)])],
 [case "${enableval}" in
-  yes) stun=true ;;
-  no)  stun=false ;;
-  *) AC_MSG_ERROR(bad value ${enableval} for --enable-stun) ;;
-esac],[if test "x$stun" = "x"; then stun=false; fi])
+  yes) riak=true ;;
+  no)  riak=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-riak) ;;
+esac],[if test "x$riak" = "x"; then riak=false; fi])

-AC_ARG_ENABLE(json,
-[AC_HELP_STRING([--enable-json], [enable JSON support for mod_bosh (default: no)])],
+AC_ARG_ENABLE(redis,
+[AC_HELP_STRING([--enable-redis], [enable Redis support (default: no)])],
 [case "${enableval}" in
-  yes) json=true ;;
-  no)  json=false ;;
-  *) AC_MSG_ERROR(bad value ${enableval} for --enable-json) ;;
-esac],[if test "x$json" = "x"; then json=false; fi])
+  yes) redis=true ;;
+  no)  redis=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-redis) ;;
+esac],[if test "x$redis" = "x"; then redis=false; fi])
+
+AC_ARG_ENABLE(elixir,
+[AC_HELP_STRING([--enable-elixir], [enable Elixir support (default: no)])],
+[case "${enableval}" in
+  yes) elixir=true ;;
+  no)  elixir=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-elixir) ;;
+esac],[if test "x$elixir" = "x"; then elixir=false; fi])

 AC_ARG_ENABLE(iconv,
 [AC_HELP_STRING([--enable-iconv], [enable iconv support (default: yes)])],
@@ -201,21 +203,13 @@ AC_ARG_ENABLE(debug,
  *) AC_MSG_ERROR(bad value ${enableval} for --enable-debug) ;;
 esac],[if test "x$debug" = "x"; then debug=true; fi])

-AC_ARG_ENABLE(http,
-[AC_HELP_STRING([--enable-http], [build external HTTP libraries ('ibrowse' and 'lhttpc', default: no)])],
+AC_ARG_ENABLE(latest_deps,
+[AC_HELP_STRING([--enable-latest-deps], [makes rebar use latest commits for dependences instead of tagged versions (default: no)])],
 [case "${enableval}" in
-  yes) http=true ;;
-  no)  http=false ;;
-  *) AC_MSG_ERROR(bad value ${enableval} for --enable-http) ;;
-esac],[if test "x$http" = "x"; then http=false; fi])
-
-AC_ARG_ENABLE(lager,
-[AC_HELP_STRING([--enable-lager], [enable lager support (default: yes)])],
-[case "${enableval}" in
-  yes) lager=true ;;
-  no)  lager=false ;;
-  *) AC_MSG_ERROR(bad value ${enableval} for --enable-lager) ;;
-esac],[if test "x$lager" = "x"; then lager=true; fi])
+  yes) latest_deps=true ;;
+  no)  latest_deps=false ;;
+  *) AC_MSG_ERROR(bad value ${enableval} for --enable-latest-deps) ;;
+esac],[if test "x$latest_deps" = "x"; then latest_deps=false; fi])

 AC_CONFIG_FILES([Makefile
 		 vars.config
@@ -235,48 +229,34 @@ if test "$ENABLEUSER" != ""; then
  AC_SUBST([INSTALLUSER], [$ENABLEUSER])
 fi

-AC_ERLANG_CHECK_LIB([sasl], [],
-    [AC_MSG_ERROR([Erlang application 'sasl' was not found])])
-AC_ERLANG_CHECK_LIB([crypto], [],
-    [AC_MSG_ERROR([Erlang application 'crypto' was not found])])
-AC_ERLANG_CHECK_LIB([public_key], [],
-    [AC_MSG_ERROR([Erlang application 'public_key' was not found])])
-AC_ERLANG_CHECK_LIB([ssl], [],
-    [AC_MSG_ERROR([Erlang application 'ssl' was not found])])
-AC_ERLANG_CHECK_LIB([mnesia], [],
-    [AC_MSG_ERROR([Erlang application 'mnesia' was not found])])
-AC_ERLANG_CHECK_LIB([inets], [],
-    [AC_MSG_ERROR([Erlang application 'inets' was not found])])
-AC_ERLANG_CHECK_LIB([compiler], [],
-    [AC_MSG_ERROR([Erlang application 'compiler' was not found])])
-if test "x$odbc" = "xtrue"; then
-   AC_ERLANG_CHECK_LIB([odbc], [],
-      [AC_MSG_ERROR([Erlang application 'odbc' was not found])])
-fi
-if test "x$tools" = "xtrue"; then
-   AC_ERLANG_CHECK_LIB([tools], [],
-      [AC_MSG_ERROR([Erlang application 'tools' was not found])])
-   AC_ERLANG_CHECK_LIB([runtime_tools], [],
-      [AC_MSG_ERROR([Erlang application 'runtime_tools' was not found])])
+ERLANG_DEPRECATED_TYPES_CHECK
+
+if test "$sqlite" = "true"; then
+   AX_LIB_SQLITE3([3.6.19])
+   if test "x$SQLITE3_VERSION" = "x"; then
+      AC_MSG_ERROR(SQLite3 library >= 3.6.19 was not found)
+   fi
 fi

 AC_SUBST(hipe)
 AC_SUBST(roster_gateway_workaround)
-AC_SUBST(transient_supervisors)
 AC_SUBST(full_xml)
-AC_SUBST(nif)
 AC_SUBST(db_type)
 AC_SUBST(odbc)
 AC_SUBST(mysql)
 AC_SUBST(pgsql)
+AC_SUBST(sqlite)
 AC_SUBST(pam)
 AC_SUBST(zlib)
-AC_SUBST(stun)
-AC_SUBST(json)
+AC_SUBST(riak)
+AC_SUBST(redis)
+AC_SUBST(elixir)
 AC_SUBST(iconv)
 AC_SUBST(debug)
-AC_SUBST(http)
-AC_SUBST(lager)
 AC_SUBST(tools)
+AC_SUBST(latest_deps)
+AC_SUBST(CFLAGS)
+AC_SUBST(CPPFLAGS)
+AC_SUBST(LDFLAGS)

 AC_OUTPUT
@@ -115,6 +115,12 @@ parse_form(Dir, File, Form, Used) ->
 	 {string, Line, Value}
 	} ->
 	    ets:insert(vars, {Name, Value, Line});
+        {match,
+         _,
+         {var, _, Name},
+         {bin,Line,[{bin_element,_,{string,_,Value},_,_}]}
+        } ->
+            ets:insert(vars, {Name, Value, Line});
 	L when is_list(L) ->
 	    lists:foreach(
 	      fun(F) ->
@@ -230,7 +230,8 @@ extract_lang_po2msg ()
 	msgattrib $PO_PATH --translated --no-fuzzy --no-obsolete --no-location --no-wrap | grep "^msg" | tail --lines=+3 >$MS_PATH
 	grep "^msgid" $PO_PATH.ms | sed 's/^msgid //g' >$MSGID_PATH
 	grep "^msgstr" $PO_PATH.ms | sed 's/^msgstr //g' >$MSGSTR_PATH
-	paste $MSGID_PATH $MSGSTR_PATH --delimiter=, | awk '{print "{" $0 "}."}' | sort -g >$MSGS_PATH
+	echo "%% -*- coding: latin-1 -*-" >$MSGS_PATH
+	paste $MSGID_PATH $MSGSTR_PATH --delimiter=, | awk '{print "{" $0 "}."}' | sort -g >>$MSGS_PATH

 	rm $MS_PATH
 	rm $MSGID_PATH
@@ -0,0 +1,5 @@
+{level, details}.
+{incl_dirs, ["src", "ebin"]}.
+{excl_mods, [eldap, 'ELDAPv3']}.
+{export, "logs/all.coverdata"}.
+
@@ -1,62 +0,0 @@
-# $Id$
-
-SHELL = /bin/bash
-
-CONTRIBUTED_MODULES = ""
-#ifeq ($(shell ls mod_http_bind.tex),mod_http_bind.tex)
-#	CONTRIBUTED_MODULES += "\\n\\setboolean{modhttpbind}{true}"
-#endif
-
-
-all:	release pdf html
-
-release:
-	@echo "Notes for the releaser:"
-	@echo "* Do not forget to add a link to the release notes in guide.tex"
-	@echo "* Do not forget to update the version number in ebin/ejabberd.app!"
-	@echo "* Do not forget to update the features in introduction.tex (including \new{} and \improved{} tags)."
-	@echo "Press any key to continue"
-	##@read foo
-	@echo "% ejabberd version (automatically generated)." > version.tex
-	@echo "\newcommand{\version}{"`sed '/vsn/!d;s/\(.*\)"\(.*\)"\(.*\)/\2/' ../ebin/ejabberd.app`"}" >> version.tex
-	@echo -n "% Contributed modules (automatically generated)."  > contributed_modules.tex
-	@echo -e "$(CONTRIBUTED_MODULES)" >> contributed_modules.tex
-
-html:	guide.html dev.html features.html
-
-pdf:	guide.pdf features.pdf
-
-clean:
-	rm -f *.aux
-	rm -f *.haux
-	rm -f *.htoc
-	rm -f *.idx
-	rm -f *.ilg
-	rm -f *.ind
-	rm -f *.log
-	rm -f *.out
-	rm -f *.pdf
-	rm -f *.toc
-	[ ! -f contributed_modules.tex ] || rm contributed_modules.tex
-
-distclean: clean
-	rm -f *.html
-
-guide.html:	guide.tex
-		hevea -fix -pedantic guide.tex
-
-dev.html:	dev.tex
-		hevea -fix -pedantic dev.tex
-
-features.html:	features.tex
-		hevea -fix -pedantic features.tex
-
-guide.pdf:	guide.tex
-		pdflatex guide.tex
-		pdflatex guide.tex
-		pdflatex guide.tex
-		makeindex guide.idx
-		pdflatex guide.tex
-
-features.pdf:	features.tex
-		pdflatex features.tex
@@ -1,18 +0,0 @@
-APPNAME = ejabberd
-VSN = $(shell sed '/vsn/!d;s/\(.*\)"\(.*\)"\(.*\)/\2/' ../../src/ejabberd.app)
-
-DOCDIR=.
-SRCDIR=../../src
-
-.PHONY = all
-
-all: docs
-
-clean:
-	rm -f *.html
-	rm edoc-info
-	rm erlang.png
-
-docs:
-	erl -noshell -run edoc_run application \
-	"'$(APPNAME)'" '"$(SRCDIR)"' '[{dir,"$(DOCDIR)"},{packages, false},{todo,true},{private,true},{def,{vsn,"$(VSN)"}},{stylesheet,"process-one.css"},{overview,"$(DOCDIR)/overview.edoc"}]' -s init stop
@@ -1,10 +0,0 @@
-@author Mickael Remond <mickael.remond@process-one.net>
-  [http://www.process-one.net/]
-@copyright 2013 ProcessOne
-@version {@vsn}, {@date} {@time}
-@title ejabberd Development API Documentation
-
-@doc
-== Introduction ==
-
-TODO: Insert content from Jerome documentation.
@@ -1,92 +0,0 @@
-html, body {
-  font-family: Verdana, sans-serif;
-  color: #000;
-  background-color: #fff;
-}
-
-h1 {
-  color: #4a5389;
-  border-bottom: solid 1px #000;
-}
-
-h2 {
-  font-size: 24px;
-  text-align: right;
-  color: #4a5389;
-  border-bottom: 1px solid #000;
-}
-
-h3 {
-  font-size: 18px;
-  color: #900;
-}
-
-h4 {
-  font-size: 14px;
-  color: #000;
-}
-
-a[href] {
-  color: #4a5389;
-}
-
-a[href]:hover {
-  background-color: #ecefff;
-}
-
-p, li, dd {
-  text-align: justify;
-}
-
-li {
-  margin-top: 0.3em;
-}
-
-li:first-child {
-  margin-top: 0px;
-}
-
-blockquote {
-  color: #555;
-}
-
-caption {
-  font-style: italic;
-  color: #009;
-  text-align: left;
-  margin-left: 20px;
-}
-
-table[border="1"] {
-  border-collapse: collapse;
-  margin-bottom: 1em;
-}
-
-table[border="1"] td {
-  border: 1px solid #ddd;
-}
-
-pre, tt, code {
-  color: #461b7e;
-}
-
-pre {
-  margin:1ex 2ex;
-  border:1px dashed lightgrey;
-  background-color:#f9f9f9;
-  padding:0.5ex;
-}
-
-pre em {
-  font-style: normal;
-  font-weight: bold;
-}
-
-dt {
-  margin:0ex 2ex;
-  font-weight:bold;
-}
-
-dd {
-  margin:0ex 0ex 1ex 4ex;
-}
@@ -1,413 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
-            "http://www.w3.org/TR/REC-html40/loose.dtd">
-<HTML>
-<HEAD>
-<TITLE>Ejabberd 2.1.12 Developers Guide
-</TITLE>
-
-<META http-equiv="Content-Type" content="text/html; charset=US-ASCII">
-<META name="GENERATOR" content="hevea 1.10">
-<STYLE type="text/css">
-.li-itemize{margin:1ex 0ex;}
-.li-enumerate{margin:1ex 0ex;}
-.dd-description{margin:0ex 0ex 1ex 4ex;}
-.dt-description{margin:0ex;}
-.toc{list-style:none;}
-.thefootnotes{text-align:left;margin:0ex;}
-.dt-thefootnotes{margin:0em;}
-.dd-thefootnotes{margin:0em 0em 0em 2em;}
-.footnoterule{margin:1em auto 1em 0px;width:50%;}
-.caption{padding-left:2ex; padding-right:2ex; margin-left:auto; margin-right:auto}
-.title{margin:2ex auto;text-align:center}
-.center{text-align:center;margin-left:auto;margin-right:auto;}
-.flushleft{text-align:left;margin-left:0ex;margin-right:auto;}
-.flushright{text-align:right;margin-left:auto;margin-right:0ex;}
-DIV TABLE{margin-left:inherit;margin-right:inherit;}
-PRE{text-align:left;margin-left:0ex;margin-right:auto;}
-BLOCKQUOTE{margin-left:4ex;margin-right:4ex;text-align:left;}
-TD P{margin:0px;}
-.boxed{border:1px solid black}
-.textboxed{border:1px solid black}
-.vbar{border:none;width:2px;background-color:black;}
-.hbar{border:none;height:2px;width:100%;background-color:black;}
-.hfill{border:none;height:1px;width:200%;background-color:black;}
-.vdisplay{border-collapse:separate;border-spacing:2px;width:auto; empty-cells:show; border:2px solid red;}
-.vdcell{white-space:nowrap;padding:0px;width:auto; border:2px solid green;}
-.display{border-collapse:separate;border-spacing:2px;width:auto; border:none;}
-.dcell{white-space:nowrap;padding:0px;width:auto; border:none;}
-.dcenter{margin:0ex auto;}
-.vdcenter{border:solid #FF8000 2px; margin:0ex auto;}
-.minipage{text-align:left; margin-left:0em; margin-right:auto;}
-.marginpar{border:solid thin black; width:20%; text-align:left;}
-.marginparleft{float:left; margin-left:0ex; margin-right:1ex;}
-.marginparright{float:right; margin-left:1ex; margin-right:0ex;}
-.theorem{text-align:left;margin:1ex auto 1ex 0ex;}
-.part{margin:2ex auto;text-align:center}
-</STYLE>
-</HEAD>
-<BODY >
-<!--HEVEA command line is: /usr/bin/hevea -fix -pedantic dev.tex -->
-<!--CUT DEF section 1 --><P><A NAME="titlepage"></A>
-
-</P><TABLE CLASS="title"><TR><TD><H1 CLASS="titlemain">Ejabberd 2.1.12 Developers Guide</H1><H3 CLASS="titlerest">Alexey Shchepin<BR>
- <A HREF="mailto:alexey@sevcom.net"><TT>mailto:alexey@sevcom.net</TT></A><BR>
- <A HREF="xmpp:aleksey@jabber.ru"><TT>xmpp:aleksey@jabber.ru</TT></A></H3></TD></TR>
-</TABLE><DIV CLASS="center">
-
-<IMG SRC="logo.png" ALT="logo.png">
-
-
-</DIV><BLOCKQUOTE CLASS="quotation"><I>I can thoroughly recommend ejabberd for ease of setup &#X2013;
-Kevin Smith, Current maintainer of the Psi project</I></BLOCKQUOTE><!--TOC section Contents-->
-<H2 CLASS="section"><!--SEC ANCHOR -->Contents</H2><!--SEC END --><UL CLASS="toc"><LI CLASS="li-toc">
-<A HREF="#htoc1">1&#XA0;&#XA0;Key Features</A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc2">2&#XA0;&#XA0;Additional Features</A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc3">3&#XA0;&#XA0;How it Works</A>
-<UL CLASS="toc"><LI CLASS="li-toc">
-<A HREF="#htoc4">3.1&#XA0;&#XA0;Router</A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc5">3.2&#XA0;&#XA0;Local Router</A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc6">3.3&#XA0;&#XA0;Session Manager</A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc7">3.4&#XA0;&#XA0;S2S Manager</A>
-</LI></UL>
-</LI><LI CLASS="li-toc"><A HREF="#htoc8">4&#XA0;&#XA0;Authentication</A>
-<UL CLASS="toc">
-<UL CLASS="toc"><LI CLASS="li-toc">
-<A HREF="#htoc9">4.0.1&#XA0;&#XA0;External</A>
-</LI></UL>
-</UL>
-</LI><LI CLASS="li-toc"><A HREF="#htoc10">5&#XA0;&#XA0;XML Representation</A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc11">6&#XA0;&#XA0;Module <TT>xml</TT></A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc12">7&#XA0;&#XA0;Module <TT>xml_stream</TT></A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc13">8&#XA0;&#XA0;Modules</A>
-<UL CLASS="toc"><LI CLASS="li-toc">
-<A HREF="#htoc14">8.1&#XA0;&#XA0;Module gen_iq_handler</A>
-</LI><LI CLASS="li-toc"><A HREF="#htoc15">8.2&#XA0;&#XA0;Services</A>
-</LI></UL>
-</LI></UL><P>Introduction
-<A NAME="intro"></A></P><P><TT>ejabberd</TT> is a free and open source instant messaging server written in <A HREF="http://www.erlang.org/">Erlang/OTP</A>.</P><P><TT>ejabberd</TT> is cross-platform, distributed, fault-tolerant, and based on open standards to achieve real-time communication.</P><P><TT>ejabberd</TT> is designed to be a rock-solid and feature rich XMPP server.</P><P><TT>ejabberd</TT> is suitable for small deployments, whether they need to be scalable or not, as well as extremely big deployments.</P><!--TOC section Key Features-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc1">1</A>&#XA0;&#XA0;Key Features</H2><!--SEC END --><P>
-<A NAME="keyfeatures"></A>
-</P><P><TT>ejabberd</TT> is:
-</P><UL CLASS="itemize"><LI CLASS="li-itemize">
-Cross-platform: <TT>ejabberd</TT> runs under Microsoft Windows and Unix derived systems such as Linux, FreeBSD and NetBSD.</LI><LI CLASS="li-itemize">Distributed: You can run <TT>ejabberd</TT> on a cluster of machines and all of them will serve the same Jabber domain(s). When you need more capacity you can simply add a new cheap node to your cluster. Accordingly, you do not need to buy an expensive high-end machine to support tens of thousands concurrent users.</LI><LI CLASS="li-itemize">Fault-tolerant: You can deploy an <TT>ejabberd</TT> cluster so that all the information required for a properly working service will be replicated permanently on all nodes. This means that if one of the nodes crashes, the others will continue working without disruption. In addition, nodes also can be added or replaced &#X2018;on the fly&#X2019;.</LI><LI CLASS="li-itemize">Administrator Friendly: <TT>ejabberd</TT> is built on top of the Open Source Erlang. As a result you do not need to install an external database, an external web server, amongst others because everything is already included, and ready to run out of the box. Other administrator benefits include:
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Comprehensive documentation.
-</LI><LI CLASS="li-itemize">Straightforward installers for Linux, Mac OS X, and Windows. </LI><LI CLASS="li-itemize">Web Administration.
-</LI><LI CLASS="li-itemize">Shared Roster Groups.
-</LI><LI CLASS="li-itemize">Command line administration tool. </LI><LI CLASS="li-itemize">Can integrate with existing authentication mechanisms.
-</LI><LI CLASS="li-itemize">Capability to send announce messages.
-</LI></UL></LI><LI CLASS="li-itemize">Internationalized: <TT>ejabberd</TT> leads in internationalization. Hence it is very well suited in a globalized world. Related features are:
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Translated to 25 languages. </LI><LI CLASS="li-itemize">Support for <A HREF="http://www.ietf.org/rfc/rfc3490.txt">IDNA</A>.
-</LI></UL></LI><LI CLASS="li-itemize">Open Standards: <TT>ejabberd</TT> is the first Open Source Jabber server claiming to fully comply to the XMPP standard.
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Fully XMPP compliant.
-</LI><LI CLASS="li-itemize">XML-based protocol.
-</LI><LI CLASS="li-itemize"><A HREF="http://www.ejabberd.im/protocols">Many protocols supported</A>.
-</LI></UL></LI></UL><!--TOC section Additional Features-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc2">2</A>&#XA0;&#XA0;Additional Features</H2><!--SEC END --><P>
-<A NAME="addfeatures"></A>
-</P><P>Moreover, <TT>ejabberd</TT> comes with a wide range of other state-of-the-art features:
-</P><UL CLASS="itemize"><LI CLASS="li-itemize">
-Modular
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Load only the modules you want.
-</LI><LI CLASS="li-itemize">Extend <TT>ejabberd</TT> with your own custom modules.
-</LI></UL>
-</LI><LI CLASS="li-itemize">Security
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-SASL and STARTTLS for c2s and s2s connections.
-</LI><LI CLASS="li-itemize">STARTTLS and Dialback s2s connections.
-</LI><LI CLASS="li-itemize">Web Admin accessible via HTTPS secure access.
-</LI></UL>
-</LI><LI CLASS="li-itemize">Databases
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Internal database for fast deployment (Mnesia).
-</LI><LI CLASS="li-itemize">Native MySQL support.
-</LI><LI CLASS="li-itemize">Native PostgreSQL support.
-</LI><LI CLASS="li-itemize">ODBC data storage support.
-</LI><LI CLASS="li-itemize">Microsoft SQL Server support. </LI></UL>
-</LI><LI CLASS="li-itemize">Authentication
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Internal Authentication.
-</LI><LI CLASS="li-itemize">PAM, LDAP and ODBC. </LI><LI CLASS="li-itemize">External Authentication script.
-</LI></UL>
-</LI><LI CLASS="li-itemize">Others
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Support for virtual hosting.
-</LI><LI CLASS="li-itemize">Compressing XML streams with Stream Compression (<A HREF="http://www.xmpp.org/extensions/xep-0138.html">XEP-0138</A>).
-</LI><LI CLASS="li-itemize">Statistics via Statistics Gathering (<A HREF="http://www.xmpp.org/extensions/xep-0039.html">XEP-0039</A>).
-</LI><LI CLASS="li-itemize">IPv6 support both for c2s and s2s connections.
-</LI><LI CLASS="li-itemize"><A HREF="http://www.xmpp.org/extensions/xep-0045.html">Multi-User Chat</A> module with support for clustering and HTML logging. </LI><LI CLASS="li-itemize">Users Directory based on users vCards.
-</LI><LI CLASS="li-itemize"><A HREF="http://www.xmpp.org/extensions/xep-0060.html">Publish-Subscribe</A> component with support for <A HREF="http://www.xmpp.org/extensions/xep-0163.html">Personal Eventing via Pubsub</A>.
-</LI><LI CLASS="li-itemize">Support for web clients: <A HREF="http://www.xmpp.org/extensions/xep-0025.html">HTTP Polling</A> and <A HREF="http://www.xmpp.org/extensions/xep-0206.html">HTTP Binding (BOSH)</A> services.
-</LI><LI CLASS="li-itemize">IRC transport.
-</LI><LI CLASS="li-itemize">Component support: interface with networks such as AIM, ICQ and MSN installing special tranports.
-</LI></UL>
-</LI></UL><!--TOC section How it Works-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc3">3</A>&#XA0;&#XA0;How it Works</H2><!--SEC END --><P>
-<A NAME="howitworks"></A></P><P>A XMPP domain is served by one or more <TT>ejabberd</TT> nodes. These nodes can
-be run on different machines that are connected via a network. They all must
-have the ability to connect to port 4369 of all another nodes, and must have
-the same magic cookie (see Erlang/OTP documentation, in other words the file
-<TT>~ejabberd/.erlang.cookie</TT> must be the same on all nodes). This is
-needed because all nodes exchange information about connected users, S2S
-connections, registered services, etc&#X2026;</P><P>Each <TT>ejabberd</TT> node have following modules:
-</P><UL CLASS="itemize"><LI CLASS="li-itemize">
-router;
-</LI><LI CLASS="li-itemize">local router.
-</LI><LI CLASS="li-itemize">session manager;
-</LI><LI CLASS="li-itemize">S2S manager;
-</LI></UL><!--TOC subsection Router-->
-<H3 CLASS="subsection"><!--SEC ANCHOR --><A NAME="htoc4">3.1</A>&#XA0;&#XA0;Router</H3><!--SEC END --><P>This module is the main router of XMPP packets on each node. It routes
-them based on their destinations domains. It has two tables: local and global
-routes. First, domain of packet destination searched in local table, and if it
-found, then the packet is routed to appropriate process. If no, then it
-searches in global table, and is routed to the appropriate <TT>ejabberd</TT> node or
-process. If it does not exists in either tables, then it sent to the S2S
-manager.</P><!--TOC subsection Local Router-->
-<H3 CLASS="subsection"><!--SEC ANCHOR --><A NAME="htoc5">3.2</A>&#XA0;&#XA0;Local Router</H3><!--SEC END --><P>This module routes packets which have a destination domain equal to this server
-name. If destination JID has a non-empty user part, then it routed to the
-session manager, else it is processed depending on it&#X2019;s content.</P><!--TOC subsection Session Manager-->
-<H3 CLASS="subsection"><!--SEC ANCHOR --><A NAME="htoc6">3.3</A>&#XA0;&#XA0;Session Manager</H3><!--SEC END --><P>This module routes packets to local users. It searches for what user resource
-packet must be sent via presence table. If this resource is connected to
-this node, it is routed to C2S process, if it connected via another node, then
-the packet is sent to session manager on that node.</P><!--TOC subsection S2S Manager-->
-<H3 CLASS="subsection"><!--SEC ANCHOR --><A NAME="htoc7">3.4</A>&#XA0;&#XA0;S2S Manager</H3><!--SEC END --><P>This module routes packets to other XMPP servers. First, it checks if an
-open S2S connection from the domain of the packet source to the domain of
-packet destination already exists. If it is open on another node, then it
-routes the packet to S2S manager on that node, if it is open on this node, then
-it is routed to the process that serves this connection, and if a connection
-does not exist, then it is opened and registered.</P><!--TOC section Authentication-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc8">4</A>&#XA0;&#XA0;Authentication</H2><!--SEC END --><!--TOC subsubsection External-->
-<H4 CLASS="subsubsection"><!--SEC ANCHOR --><A NAME="htoc9">4.0.1</A>&#XA0;&#XA0;External</H4><!--SEC END --><P>
-<A NAME="externalauth"></A>
-</P><P>The external authentication script follows
-<A HREF="http://www.erlang.org/doc/tutorial/c_portdriver.html">the erlang port driver API</A>.</P><P>That script is supposed to do theses actions, in an infinite loop:
-</P><UL CLASS="itemize"><LI CLASS="li-itemize">
-read from stdin: AABBBBBBBBB.....
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-A: 2 bytes of length data (a short in network byte order)
-</LI><LI CLASS="li-itemize">B: a string of length found in A that contains operation in plain text
-operation are as follows:
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-auth:User:Server:Password (check if a username/password pair is correct)
-</LI><LI CLASS="li-itemize">isuser:User:Server (check if it&#X2019;s a valid user)
-</LI><LI CLASS="li-itemize">setpass:User:Server:Password (set user&#X2019;s password)
-</LI><LI CLASS="li-itemize">tryregister:User:Server:Password (try to register an account)
-</LI><LI CLASS="li-itemize">removeuser:User:Server (remove this account)
-</LI><LI CLASS="li-itemize">removeuser3:User:Server:Password (remove this account if the password is correct)
-</LI></UL>
-</LI></UL>
-</LI><LI CLASS="li-itemize">write to stdout: AABB
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-A: the number 2 (coded as a short, which is bytes length of following result)
-</LI><LI CLASS="li-itemize">B: the result code (coded as a short), should be 1 for success/valid, or 0 for failure/invalid
-</LI></UL>
-</LI></UL><P>Example python script
-</P><PRE CLASS="verbatim">#!/usr/bin/python
-
-import sys
-from struct import *
-
-def from_ejabberd():
-    input_length = sys.stdin.read(2)
-    (size,) = unpack('&gt;h', input_length)
-    return sys.stdin.read(size).split(':')
-
-def to_ejabberd(bool):
-    answer = 0
-    if bool:
-        answer = 1
-    token = pack('&gt;hh', 2, answer)
-    sys.stdout.write(token)
-    sys.stdout.flush()
-
-def auth(username, server, password):
-    return True
-
-def isuser(username, server):
-    return True
-
-def setpass(username, server, password):
-    return True
-
-while True:
-    data = from_ejabberd()
-    success = False
-    if data[0] == "auth":
-        success = auth(data[1], data[2], data[3])
-    elif data[0] == "isuser":
-        success = isuser(data[1], data[2])
-    elif data[0] == "setpass":
-        success = setpass(data[1], data[2], data[3])
-    to_ejabberd(success)
-</PRE><!--TOC section XML Representation-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc10">5</A>&#XA0;&#XA0;XML Representation</H2><!--SEC END --><P>
-<A NAME="xmlrepr"></A></P><P>Each XML stanza is represented as the following tuple:
-</P><PRE CLASS="verbatim">XMLElement = {xmlelement, Name, Attrs, [ElementOrCDATA]}
-        Name = string()
-        Attrs = [Attr]
-        Attr = {Key, Val}
-        Key = string()
-        Val = string()
-        ElementOrCDATA = XMLElement | CDATA
-        CDATA = {xmlcdata, string()}
-</PRE><P>E.&#XA0;g. this stanza:
-</P><PRE CLASS="verbatim">&lt;message to='test@conference.example.org' type='groupchat'&gt;
-  &lt;body&gt;test&lt;/body&gt;
-&lt;/message&gt;
-</PRE><P>is represented as the following structure:
-</P><PRE CLASS="verbatim">{xmlelement, "message",
-    [{"to", "test@conference.example.org"},
-     {"type", "groupchat"}],
-    [{xmlelement, "body",
-         [],
-         [{xmlcdata, "test"}]}]}}
-</PRE><!--TOC section Module <TT>xml</TT>-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc11">6</A>&#XA0;&#XA0;Module <TT>xml</TT></H2><!--SEC END --><P>
-<A NAME="xmlmod"></A></P><DL CLASS="description"><DT CLASS="dt-description">
-</DT><DD CLASS="dd-description"><CODE>element_to_string(El) -&gt; string()</CODE>
-<PRE CLASS="verbatim">El = XMLElement
-</PRE>Returns string representation of XML stanza <TT>El</TT>.</DD><DT CLASS="dt-description"></DT><DD CLASS="dd-description"><CODE>crypt(S) -&gt; string()</CODE>
-<PRE CLASS="verbatim">S = string()
-</PRE>Returns string which correspond to <TT>S</TT> with encoded XML special
-characters.</DD><DT CLASS="dt-description"></DT><DD CLASS="dd-description"><CODE>remove_cdata(ECList) -&gt; EList</CODE>
-<PRE CLASS="verbatim">ECList = [ElementOrCDATA]
-EList = [XMLElement]
-</PRE><TT>EList</TT> is a list of all non-CDATA elements of ECList.</DD><DT CLASS="dt-description"></DT><DD CLASS="dd-description"><CODE>get_path_s(El, Path) -&gt; Res</CODE>
-<PRE CLASS="verbatim">El = XMLElement
-Path = [PathItem]
-PathItem = PathElem | PathAttr | PathCDATA
-PathElem = {elem, Name}
-PathAttr = {attr, Name}
-PathCDATA = cdata
-Name = string()
-Res = string() | XMLElement
-</PRE>If <TT>Path</TT> is empty, then returns <TT>El</TT>. Else sequentially
-consider elements of <TT>Path</TT>. Each element is one of:
-<DL CLASS="description"><DT CLASS="dt-description">
-</DT><DD CLASS="dd-description"><CODE>{elem, Name}</CODE> <TT>Name</TT> is name of subelement of
-<TT>El</TT>, if such element exists, then this element considered in
-following steps, else returns empty string.
-</DD><DT CLASS="dt-description"></DT><DD CLASS="dd-description"><CODE>{attr, Name}</CODE> If <TT>El</TT> have attribute <TT>Name</TT>, then
-returns value of this attribute, else returns empty string.
-</DD><DT CLASS="dt-description"></DT><DD CLASS="dd-description"><CODE>cdata</CODE> Returns CDATA of <TT>El</TT>.
-</DD></DL></DD><DT CLASS="dt-description"></DT><DD CLASS="dd-description">TODO:
-<PRE CLASS="verbatim">         get_cdata/1, get_tag_cdata/1
-         get_attr/2, get_attr_s/2
-         get_tag_attr/2, get_tag_attr_s/2
-         get_subtag/2
-</PRE></DD></DL><!--TOC section Module <TT>xml_stream</TT>-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc12">7</A>&#XA0;&#XA0;Module <TT>xml_stream</TT></H2><!--SEC END --><P>
-<A NAME="xmlstreammod"></A></P><DL CLASS="description"><DT CLASS="dt-description">
-</DT><DD CLASS="dd-description"><CODE>parse_element(Str) -&gt; XMLElement | {error, Err}</CODE>
-<PRE CLASS="verbatim">Str = string()
-Err = term()
-</PRE>Parses <TT>Str</TT> using XML parser, returns either parsed element or error
-tuple.
-</DD></DL><!--TOC section Modules-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc13">8</A>&#XA0;&#XA0;Modules</H2><!--SEC END --><P>
-<A NAME="emods"></A></P><!--TOC subsection Module gen_iq_handler-->
-<H3 CLASS="subsection"><!--SEC ANCHOR --><A NAME="htoc14">8.1</A>&#XA0;&#XA0;Module gen_iq_handler</H3><!--SEC END --><P>
-<A NAME="geniqhandl"></A></P><P>The module <CODE>gen_iq_handler</CODE> allows to easily write handlers for IQ packets
-of particular XML namespaces that addressed to server or to users bare JIDs.</P><P>In this module the following functions are defined:
-</P><DL CLASS="description"><DT CLASS="dt-description">
-</DT><DD CLASS="dd-description"><CODE>add_iq_handler(Component, Host, NS, Module, Function, Type)</CODE>
-<PRE CLASS="verbatim">Component = Module = Function = atom()
-Host = NS = string()
-Type = no_queue | one_queue | parallel
-</PRE>Registers function <CODE>Module:Function</CODE> as handler for IQ packets on
-virtual host <CODE>Host</CODE> that contain child of namespace <CODE>NS</CODE> in
-<CODE>Component</CODE>. Queueing discipline is <CODE>Type</CODE>. There are at least
-two components defined:
-<DL CLASS="description"><DT CLASS="dt-description">
-</DT><DD CLASS="dd-description"><CODE>ejabberd_local</CODE> Handles packets that addressed to server JID;
-</DD><DT CLASS="dt-description"></DT><DD CLASS="dd-description"><CODE>ejabberd_sm</CODE> Handles packets that addressed to users bare JIDs.
-</DD></DL>
-</DD><DT CLASS="dt-description"></DT><DD CLASS="dd-description"><CODE>remove_iq_handler(Component, Host, NS)</CODE>
-<PRE CLASS="verbatim">Component = atom()
-Host = NS = string()
-</PRE>Removes IQ handler on virtual host <CODE>Host</CODE> for namespace <CODE>NS</CODE> from
-<CODE>Component</CODE>.
-</DD></DL><P>Handler function must have the following type:
-</P><DL CLASS="description"><DT CLASS="dt-description">
-</DT><DD CLASS="dd-description"><CODE>Module:Function(From, To, IQ)</CODE>
-<PRE CLASS="verbatim">From = To = jid()
-</PRE></DD></DL><PRE CLASS="verbatim">-module(mod_cputime).
-
-behaviour(gen_mod).
-
-export([start/2,
-         stop/1,
-         process_local_iq/3]).
-
-include("ejabberd.hrl").
-include("jlib.hrl").
-
-define(NS_CPUTIME, "ejabberd:cputime").
-
-start(Host, Opts) -&gt;
-    IQDisc = gen_mod:get_opt(iqdisc, Opts, one_queue),
-    gen_iq_handler:add_iq_handler(ejabberd_local, Host, ?NS_CPUTIME,
-                                  ?MODULE, process_local_iq, IQDisc).
-
-stop(Host) -&gt;
-    gen_iq_handler:remove_iq_handler(ejabberd_local, Host, ?NS_CPUTIME).
-
-process_local_iq(From, To, {iq, ID, Type, XMLNS, SubEl}) -&gt;
-    case Type of
-        set -&gt;
-            {iq, ID, error, XMLNS,
-             [SubEl, ?ERR_NOT_ALLOWED]};
-        get -&gt;
-            CPUTime = element(1, erlang:statistics(runtime))/1000,
-            SCPUTime = lists:flatten(io_lib:format("~.3f", CPUTime)),
-            {iq, ID, result, XMLNS,
-             [{xmlelement, "query",
-               [{"xmlns", ?NS_CPUTIME}],
-               [{xmlelement, "cputime", [], [{xmlcdata, SCPUTime}]}]}]}
-    end.
-</PRE><!--TOC subsection Services-->
-<H3 CLASS="subsection"><!--SEC ANCHOR --><A NAME="htoc15">8.2</A>&#XA0;&#XA0;Services</H3><!--SEC END --><P>
-<A NAME="services"></A></P><PRE CLASS="verbatim">-module(mod_echo).
-
-behaviour(gen_mod).
-
-export([start/2, init/1, stop/1]).
-
-include("ejabberd.hrl").
-include("jlib.hrl").
-
-start(Host, Opts) -&gt;
-    MyHost = gen_mod:get_opt(host, Opts, "echo." ++ Host),
-    register(gen_mod:get_module_proc(Host, ?PROCNAME),
-             spawn(?MODULE, init, [MyHost])).
-
-init(Host) -&gt;
-    ejabberd_router:register_local_route(Host),
-    loop(Host).
-
-loop(Host) -&gt;
-    receive
-        {route, From, To, Packet} -&gt;
-            ejabberd_router:route(To, From, Packet),
-            loop(Host);
-        stop -&gt;
-            ejabberd_router:unregister_route(Host),
-            ok;
-        _ -&gt;
-            loop(Host)
-    end.
-
-stop(Host) -&gt;
-    Proc = gen_mod:get_module_proc(Host, ?PROCNAME),
-    Proc ! stop,
-    {wait, Proc}.
-</PRE><!--CUT END -->
-<!--HTMLFOOT-->
-<!--ENDHTML-->
-<!--FOOTER-->
-<HR SIZE=2><BLOCKQUOTE CLASS="quote"><EM>This document was translated from L<sup>A</sup>T<sub>E</sub>X by
-</EM><A HREF="http://hevea.inria.fr/index.html"><EM>H</EM><EM><FONT SIZE=2><sup>E</sup></FONT></EM><EM>V</EM><EM><FONT SIZE=2><sup>E</sup></FONT></EM><EM>A</EM></A><EM>.</EM></BLOCKQUOTE></BODY>
-</HTML>
@@ -1,470 +0,0 @@
-\documentclass[a4paper,10pt]{article}
-
-%% Packages
-\usepackage{graphics}
-\usepackage{hevea}
-\usepackage{makeidx}
-\usepackage{verbatim}
-
-%% Index
-\makeindex
-% Remove the index anchors from the HTML version to save size and bandwith.
-\newcommand{\ind}[1]{\begin{latexonly}\index{#1}\end{latexonly}}
-
-%% Images
-\newcommand{\logoscale}{0.7}
-\newcommand{\imgscale}{0.58}
-\newcommand{\insimg}[1]{\insscaleimg{\imgscale}{#1}}
-\newcommand{\insscaleimg}[2]{
-  \imgsrc{#2}{}
-  \begin{latexonly}
-    \scalebox{#1}{\includegraphics{#2}}
-  \end{latexonly}
-}
-
-%% Various
-\newcommand{\ns}[1]{\texttt{#1}}
-\newcommand{\ejabberd}{\texttt{ejabberd}}
-\newcommand{\Jabber}{Jabber}
-\newcommand{\XMPP}{XMPP}
-
-%% Modules
-\newcommand{\module}[1]{\texttt{#1}}
-\newcommand{\modadhoc}{\module{mod\_adhoc}}
-\newcommand{\modannounce}{\module{mod\_announce}}
-\newcommand{\modconfigure}{\module{mod\_configure}}
-\newcommand{\moddisco}{\module{mod\_disco}}
-\newcommand{\modecho}{\module{mod\_echo}}
-\newcommand{\modirc}{\module{mod\_irc}}
-\newcommand{\modlast}{\module{mod\_last}}
-\newcommand{\modlastodbc}{\module{mod\_last\_odbc}}
-\newcommand{\modmuc}{\module{mod\_muc}}
-\newcommand{\modmuclog}{\module{mod\_muc\_log}}
-\newcommand{\modoffline}{\module{mod\_offline}}
-\newcommand{\modofflineodbc}{\module{mod\_offline\_odbc}}
-\newcommand{\modprivacy}{\module{mod\_privacy}}
-\newcommand{\modprivate}{\module{mod\_private}}
-\newcommand{\modpubsub}{\module{mod\_pubsub}}
-\newcommand{\modregister}{\module{mod\_register}}
-\newcommand{\modroster}{\module{mod\_roster}}
-\newcommand{\modrosterodbc}{\module{mod\_roster\_odbc}}
-\newcommand{\modservicelog}{\module{mod\_service\_log}}
-\newcommand{\modsharedroster}{\module{mod\_shared\_roster}}
-\newcommand{\modstats}{\module{mod\_stats}}
-\newcommand{\modtime}{\module{mod\_time}}
-\newcommand{\modvcard}{\module{mod\_vcard}}
-\newcommand{\modvcardldap}{\module{mod\_vcard\_ldap}}
-\newcommand{\modvcardodbc}{\module{mod\_vcard\_odbc}}
-\newcommand{\modversion}{\module{mod\_version}}
-
-%% Title page
-\include{version}
-\title{Ejabberd \version\ Developers Guide}
-\author{Alexey Shchepin \\
-  \ahrefurl{mailto:alexey@sevcom.net} \\
-  \ahrefurl{xmpp:aleksey@jabber.ru}}
-
-%% Options
-\newcommand{\marking}[1]{#1} % Marking disabled
-\newcommand{\quoting}[2][yozhik]{} % Quotes disabled
-\newcommand{\new}{\begin{latexonly}\marginpar{\textsc{new}}\end{latexonly}} % Highlight new features
-\newcommand{\improved}{\begin{latexonly}\marginpar{\textsc{improved}}\end{latexonly}} % Highlight improved features
-\newcommand{\moreinfo}[1]{} % Hide details
-
-%% Footnotes
-\newcommand{\txepref}[2]{\footahref{http://www.xmpp.org/extensions/xep-#1.html}{#2}}
-\newcommand{\xepref}[1]{\txepref{#1}{XEP-#1}}
-
-\begin{document}
-
-\label{titlepage}
-\begin{titlepage}
-  \maketitle{}
-
-  \begin{center}
-  {\insscaleimg{\logoscale}{logo.png}
-    \par
-  }
-  \end{center}
-
-  \begin{quotation}\textit{I can thoroughly recommend ejabberd for ease of setup --
-  Kevin Smith, Current maintainer of the Psi project}\end{quotation}
-
-\end{titlepage}
-
-\tableofcontents{}
-
-% Input introduction.tex
-\input{introduction}
-
-\section{How it Works}
-\label{howitworks}
-
-
-A \XMPP{} domain is served by one or more \ejabberd{} nodes.  These nodes can
-be run on different machines that are connected via a network.  They all must
-have the ability to connect to port 4369 of all another nodes, and must have
-the same magic cookie (see Erlang/OTP documentation, in other words the file
-\texttt{\~{}ejabberd/.erlang.cookie} must be the same on all nodes). This is
-needed because all nodes exchange information about connected users, S2S
-connections, registered services, etc\ldots
-
-
-
-Each \ejabberd{} node have following modules:
-\begin{itemize}
-\item router;
-\item local router.
-\item session manager;
-\item S2S manager;
-\end{itemize}
-
-
-\subsection{Router}
-
-This module is the main router of \XMPP{} packets on each node.  It routes
-them based on their destinations domains.  It has two tables: local and global
-routes.  First, domain of packet destination searched in local table, and if it
-found, then the packet is routed to appropriate process.  If no, then it
-searches in global table, and is routed to the appropriate \ejabberd{} node or
-process.  If it does not exists in either tables, then it sent to the S2S
-manager.
-
-
-\subsection{Local Router}
-
-This module routes packets which have a destination domain equal to this server
-name.  If destination JID has a non-empty user part, then it routed to the
-session manager, else it is processed depending on it's content.
-
-
-\subsection{Session Manager}
-
-This module routes packets to local users.  It searches for what user resource
-packet must be sent via presence table.  If this resource is connected to
-this node, it is routed to C2S process, if it connected via another node, then
-the packet is sent to session manager on that node.
-
-
-\subsection{S2S Manager}
-
-This module routes packets to other \XMPP{} servers.  First, it checks if an
-open S2S connection from the domain of the packet source to the domain of
-packet destination already exists. If it is open on another node, then it
-routes the packet to S2S manager on that node, if it is open on this node, then
-it is routed to the process that serves this connection, and if a connection
-does not exist, then it is opened and registered.
-
-
-\section{Authentication}
-
-\subsubsection{External}
-\label{externalauth}
-\ind{external authentication}
-
-The external authentication script follows
-\footahref{http://www.erlang.org/doc/tutorial/c_portdriver.html}{the erlang port driver API}.
-
-That script is supposed to do theses actions, in an infinite loop:
-\begin{itemize}
-\item read from stdin: AABBBBBBBBB.....
-    \begin{itemize}
-    \item A: 2 bytes of length data (a short in network byte order)
-    \item B: a string of length found in A that contains operation in plain text
-    operation are as follows:
-    \begin{itemize}
-    \item auth:User:Server:Password (check if a username/password pair is correct)
-    \item isuser:User:Server (check if it's a valid user)
-    \item setpass:User:Server:Password (set user's password)
-    \item tryregister:User:Server:Password (try to register an account)
-    \item removeuser:User:Server (remove this account)
-    \item removeuser3:User:Server:Password (remove this account if the password is correct)
-    \end{itemize}
-    \end{itemize}
-\item write to stdout: AABB
-    \begin{itemize}
-    \item A: the number 2 (coded as a short, which is bytes length of following result)
-    \item B: the result code (coded as a short), should be 1 for success/valid, or 0 for failure/invalid
-    \end{itemize}
-\end{itemize}
-
-Example python script
-\begin{verbatim}
-#!/usr/bin/python
-
-import sys
-from struct import *
-
-def from_ejabberd():
-    input_length = sys.stdin.read(2)
-    (size,) = unpack('>h', input_length)
-    return sys.stdin.read(size).split(':')
-
-def to_ejabberd(bool):
-    answer = 0
-    if bool:
-        answer = 1
-    token = pack('>hh', 2, answer)
-    sys.stdout.write(token)
-    sys.stdout.flush()
-
-def auth(username, server, password):
-    return True
-
-def isuser(username, server):
-    return True
-
-def setpass(username, server, password):
-    return True
-
-while True:
-    data = from_ejabberd()
-    success = False
-    if data[0] == "auth":
-        success = auth(data[1], data[2], data[3])
-    elif data[0] == "isuser":
-        success = isuser(data[1], data[2])
-    elif data[0] == "setpass":
-        success = setpass(data[1], data[2], data[3])
-    to_ejabberd(success)
-\end{verbatim}
-
-\section{XML Representation}
-\label{xmlrepr}
-
-Each XML stanza is represented as the following tuple:
-\begin{verbatim}
-XMLElement = {xmlelement, Name, Attrs, [ElementOrCDATA]}
-        Name = string()
-        Attrs = [Attr]
-        Attr = {Key, Val}
-        Key = string()
-        Val = string()
-        ElementOrCDATA = XMLElement | CDATA
-        CDATA = {xmlcdata, string()}
-\end{verbatim}
-E.\,g. this stanza:
-\begin{verbatim}
-<message to='test@conference.example.org' type='groupchat'>
-  <body>test</body>
-</message>
-\end{verbatim}
-is represented as the following structure:
-\begin{verbatim}
-{xmlelement, "message",
-    [{"to", "test@conference.example.org"},
-     {"type", "groupchat"}],
-    [{xmlelement, "body",
-         [],
-         [{xmlcdata, "test"}]}]}}
-\end{verbatim}
-
-
-
-\section{Module \texttt{xml}}
-\label{xmlmod}
-
-\begin{description}
-\item{\verb|element_to_string(El) -> string()|}
-\begin{verbatim}
-El = XMLElement
-\end{verbatim}
-  Returns string representation of XML stanza \texttt{El}.
-
-\item{\verb|crypt(S) -> string()|}
-\begin{verbatim}
-S = string()
-\end{verbatim}
-  Returns string which correspond to \texttt{S} with encoded XML special
-  characters.
-
-\item{\verb|remove_cdata(ECList) -> EList|}
-\begin{verbatim}
-ECList = [ElementOrCDATA]
-EList = [XMLElement]
-\end{verbatim}
-  \texttt{EList} is a list of all non-CDATA elements of ECList.
-
-
-
-\item{\verb|get_path_s(El, Path) -> Res|}
-\begin{verbatim}
-El = XMLElement
-Path = [PathItem]
-PathItem = PathElem | PathAttr | PathCDATA
-PathElem = {elem, Name}
-PathAttr = {attr, Name}
-PathCDATA = cdata
-Name = string()
-Res = string() | XMLElement
-\end{verbatim}
-  If \texttt{Path} is empty, then returns \texttt{El}.  Else sequentially
-  consider elements of \texttt{Path}.  Each element is one of:
-  \begin{description}
-  \item{\verb|{elem, Name}|} \texttt{Name} is name of subelement of
-    \texttt{El}, if such element exists, then this element considered in
-    following steps, else returns empty string.
-  \item{\verb|{attr, Name}|} If \texttt{El} have attribute \texttt{Name}, then
-    returns value of this attribute, else returns empty string.
-  \item{\verb|cdata|} Returns CDATA of \texttt{El}.
-  \end{description}
-
-\item{TODO:}
-\begin{verbatim}
-         get_cdata/1, get_tag_cdata/1
-         get_attr/2, get_attr_s/2
-         get_tag_attr/2, get_tag_attr_s/2
-         get_subtag/2
-\end{verbatim}
-\end{description}
-
-
-\section{Module \texttt{xml\_stream}}
-\label{xmlstreammod}
-
-\begin{description}
-\item{\verb!parse_element(Str) -> XMLElement | {error, Err}!}
-\begin{verbatim}
-Str = string()
-Err = term()
-\end{verbatim}
-  Parses \texttt{Str} using XML parser, returns either parsed element or error
-  tuple.
-\end{description}
-
-
-\section{Modules}
-\label{emods}
-
-
-%\subsection{gen\_mod behaviour}
-%\label{genmod}
-
-%TBD
-
-\subsection{Module gen\_iq\_handler}
-\label{geniqhandl}
-
-The module \verb|gen_iq_handler| allows to easily write handlers for IQ packets
-of particular XML namespaces that addressed to server or to users bare JIDs.
-
-In this module the following functions are defined:
-\begin{description}
-\item{\verb|add_iq_handler(Component, Host, NS, Module, Function, Type)|}
-\begin{verbatim}
-Component = Module = Function = atom()
-Host = NS = string()
-Type = no_queue | one_queue | parallel
-\end{verbatim}
-  Registers function \verb|Module:Function| as handler for IQ packets on
-  virtual host \verb|Host| that contain child of namespace \verb|NS| in
-  \verb|Component|.  Queueing discipline is \verb|Type|.  There are at least
-  two components defined:
-  \begin{description}
-  \item{\verb|ejabberd_local|} Handles packets that addressed to server JID;
-  \item{\verb|ejabberd_sm|} Handles packets that addressed to users bare JIDs.
-  \end{description}
-\item{\verb|remove_iq_handler(Component, Host, NS)|}
-\begin{verbatim}
-Component = atom()
-Host = NS = string()
-\end{verbatim}
-  Removes IQ handler on virtual host \verb|Host| for namespace \verb|NS| from
-  \verb|Component|.
-\end{description}
-
-Handler function must have the following type:
-\begin{description}
-\item{\verb|Module:Function(From, To, IQ)|}
-\begin{verbatim}
-From = To = jid()
-\end{verbatim}
-\end{description}
-
-
-
-\begin{verbatim}
-module(mod_cputime).
-
-behaviour(gen_mod).
-
-export([start/2,
-         stop/1,
-         process_local_iq/3]).
-
-include("ejabberd.hrl").
-include("jlib.hrl").
-
-define(NS_CPUTIME, "ejabberd:cputime").
-
-start(Host, Opts) ->
-    IQDisc = gen_mod:get_opt(iqdisc, Opts, one_queue),
-    gen_iq_handler:add_iq_handler(ejabberd_local, Host, ?NS_CPUTIME,
-                                  ?MODULE, process_local_iq, IQDisc).
-
-stop(Host) ->
-    gen_iq_handler:remove_iq_handler(ejabberd_local, Host, ?NS_CPUTIME).
-
-process_local_iq(From, To, {iq, ID, Type, XMLNS, SubEl}) ->
-    case Type of
-        set ->
-            {iq, ID, error, XMLNS,
-             [SubEl, ?ERR_NOT_ALLOWED]};
-        get ->
-            CPUTime = element(1, erlang:statistics(runtime))/1000,
-            SCPUTime = lists:flatten(io_lib:format("~.3f", CPUTime)),
-            {iq, ID, result, XMLNS,
-             [{xmlelement, "query",
-               [{"xmlns", ?NS_CPUTIME}],
-               [{xmlelement, "cputime", [], [{xmlcdata, SCPUTime}]}]}]}
-    end.
-\end{verbatim}
-
-
-\subsection{Services}
-\label{services}
-
-%TBD
-
-
-%TODO: use \verb|proc_lib|
-\begin{verbatim}
-module(mod_echo).
-
-behaviour(gen_mod).
-
-export([start/2, init/1, stop/1]).
-
-include("ejabberd.hrl").
-include("jlib.hrl").
-
-start(Host, Opts) ->
-    MyHost = gen_mod:get_opt(host, Opts, "echo." ++ Host),
-    register(gen_mod:get_module_proc(Host, ?PROCNAME),
-             spawn(?MODULE, init, [MyHost])).
-
-init(Host) ->
-    ejabberd_router:register_local_route(Host),
-    loop(Host).
-
-loop(Host) ->
-    receive
-        {route, From, To, Packet} ->
-            ejabberd_router:route(To, From, Packet),
-            loop(Host);
-        stop ->
-            ejabberd_router:unregister_route(Host),
-            ok;
-        _ ->
-            loop(Host)
-    end.
-
-stop(Host) ->
-    Proc = gen_mod:get_module_proc(Host, ?PROCNAME),
-    Proc ! stop,
-    {wait, Proc}.
-\end{verbatim}
-
-
-
-\end{document}
@@ -1,132 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
-            "http://www.w3.org/TR/REC-html40/loose.dtd">
-<HTML>
-<HEAD>
-<TITLE>Ejabberd 2.1.12 Feature Sheet
-</TITLE>
-
-<META http-equiv="Content-Type" content="text/html; charset=US-ASCII">
-<META name="GENERATOR" content="hevea 1.10">
-<STYLE type="text/css">
-.li-itemize{margin:1ex 0ex;}
-.li-enumerate{margin:1ex 0ex;}
-.dd-description{margin:0ex 0ex 1ex 4ex;}
-.dt-description{margin:0ex;}
-.toc{list-style:none;}
-.thefootnotes{text-align:left;margin:0ex;}
-.dt-thefootnotes{margin:0em;}
-.dd-thefootnotes{margin:0em 0em 0em 2em;}
-.footnoterule{margin:1em auto 1em 0px;width:50%;}
-.caption{padding-left:2ex; padding-right:2ex; margin-left:auto; margin-right:auto}
-.title{margin:2ex auto;text-align:center}
-.center{text-align:center;margin-left:auto;margin-right:auto;}
-.flushleft{text-align:left;margin-left:0ex;margin-right:auto;}
-.flushright{text-align:right;margin-left:auto;margin-right:0ex;}
-DIV TABLE{margin-left:inherit;margin-right:inherit;}
-PRE{text-align:left;margin-left:0ex;margin-right:auto;}
-BLOCKQUOTE{margin-left:4ex;margin-right:4ex;text-align:left;}
-TD P{margin:0px;}
-.boxed{border:1px solid black}
-.textboxed{border:1px solid black}
-.vbar{border:none;width:2px;background-color:black;}
-.hbar{border:none;height:2px;width:100%;background-color:black;}
-.hfill{border:none;height:1px;width:200%;background-color:black;}
-.vdisplay{border-collapse:separate;border-spacing:2px;width:auto; empty-cells:show; border:2px solid red;}
-.vdcell{white-space:nowrap;padding:0px;width:auto; border:2px solid green;}
-.display{border-collapse:separate;border-spacing:2px;width:auto; border:none;}
-.dcell{white-space:nowrap;padding:0px;width:auto; border:none;}
-.dcenter{margin:0ex auto;}
-.vdcenter{border:solid #FF8000 2px; margin:0ex auto;}
-.minipage{text-align:left; margin-left:0em; margin-right:auto;}
-.marginpar{border:solid thin black; width:20%; text-align:left;}
-.marginparleft{float:left; margin-left:0ex; margin-right:1ex;}
-.marginparright{float:right; margin-left:1ex; margin-right:0ex;}
-.theorem{text-align:left;margin:1ex auto 1ex 0ex;}
-.part{margin:2ex auto;text-align:center}
-SPAN{width:20%; float:right; text-align:left; margin-left:auto;}
-</STYLE>
-</HEAD>
-<BODY >
-<!--HEVEA command line is: /usr/bin/hevea -fix -pedantic features.tex -->
-<!--CUT DEF section 1 --><P><A NAME="titlepage"></A>
-
-</P><TABLE CLASS="title"><TR><TD><H1 CLASS="titlemain">Ejabberd 2.1.12 Feature Sheet</H1><H3 CLASS="titlerest">Sander Devrieze<BR>
- <A HREF="mailto:s.devrieze@pandora.be"><TT>mailto:s.devrieze@pandora.be</TT></A><BR>
- <A HREF="xmpp:sander@devrieze.dyndns.org"><TT>xmpp:sander@devrieze.dyndns.org</TT></A></H3></TD></TR>
-</TABLE><DIV CLASS="center">
-
-<IMG SRC="logo.png" ALT="logo.png">
-
-
-</DIV><BLOCKQUOTE CLASS="quotation"><FONT COLOR="#921700"><I>I can thoroughly recommend ejabberd for ease of setup &#X2013;
-Kevin Smith, Current maintainer of the Psi project</I></FONT></BLOCKQUOTE><P>Introduction
-<A NAME="intro"></A></P><BLOCKQUOTE CLASS="quotation"><FONT COLOR="#921700"><I>I just tried out ejabberd and was impressed both by ejabberd itself and the language it is written in, Erlang. &#X2014;
-Joeri</I></FONT></BLOCKQUOTE><P><TT>ejabberd</TT> is a <B><FONT SIZE=4><FONT COLOR="#001376">free and open source</FONT></FONT></B> instant messaging server written in <A HREF="http://www.erlang.org/">Erlang/OTP</A>.</P><P><TT>ejabberd</TT> is <B><FONT SIZE=4><FONT COLOR="#001376">cross-platform</FONT></FONT></B>, distributed, fault-tolerant, and based on open standards to achieve real-time communication.</P><P><TT>ejabberd</TT> is designed to be a <B><FONT SIZE=4><FONT COLOR="#001376">rock-solid and feature rich</FONT></FONT></B> XMPP server.</P><P><TT>ejabberd</TT> is suitable for small deployments, whether they need to be <B><FONT SIZE=4><FONT COLOR="#001376">scalable</FONT></FONT></B> or not, as well as extremely big deployments.</P><!--TOC section Key Features-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc1"></A>Key Features</H2><!--SEC END --><P>
-<A NAME="keyfeatures"></A>
-</P><BLOCKQUOTE CLASS="quotation"><FONT COLOR="#921700"><I>Erlang seems to be tailor-made for writing stable, robust servers. &#X2014;
-Peter Saint-Andr&#XE9;, Executive Director of the Jabber Software Foundation</I></FONT></BLOCKQUOTE><P><TT>ejabberd</TT> is:
-</P><UL CLASS="itemize"><LI CLASS="li-itemize">
-<B><FONT SIZE=4><FONT COLOR="#001376">Cross-platform:</FONT></FONT></B> <TT>ejabberd</TT> runs under Microsoft Windows and Unix derived systems such as Linux, FreeBSD and NetBSD.</LI><LI CLASS="li-itemize"><B><FONT SIZE=4><FONT COLOR="#001376">Distributed:</FONT></FONT></B> You can run <TT>ejabberd</TT> on a cluster of machines and all of them will serve the same Jabber domain(s). When you need more capacity you can simply add a new cheap node to your cluster. Accordingly, you do not need to buy an expensive high-end machine to support tens of thousands concurrent users.</LI><LI CLASS="li-itemize"><B><FONT SIZE=4><FONT COLOR="#001376">Fault-tolerant:</FONT></FONT></B> You can deploy an <TT>ejabberd</TT> cluster so that all the information required for a properly working service will be replicated permanently on all nodes. This means that if one of the nodes crashes, the others will continue working without disruption. In addition, nodes also can be added or replaced &#X2018;on the fly&#X2019;.</LI><LI CLASS="li-itemize"><B><FONT SIZE=4><FONT COLOR="#001376">Administrator Friendly:</FONT></FONT></B> <TT>ejabberd</TT> is built on top of the Open Source Erlang. As a result you do not need to install an external database, an external web server, amongst others because everything is already included, and ready to run out of the box. Other administrator benefits include:
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Comprehensive documentation.
-</LI><LI CLASS="li-itemize">Straightforward installers for Linux, Mac OS X, and Windows. </LI><LI CLASS="li-itemize">Web Administration.
-</LI><LI CLASS="li-itemize">Shared Roster Groups.
-</LI><LI CLASS="li-itemize">Command line administration tool. </LI><LI CLASS="li-itemize">Can integrate with existing authentication mechanisms.
-</LI><LI CLASS="li-itemize">Capability to send announce messages.
-</LI></UL></LI><LI CLASS="li-itemize"><B><FONT SIZE=4><FONT COLOR="#001376">Internationalized:</FONT></FONT></B> <TT>ejabberd</TT> leads in internationalization. Hence it is very well suited in a globalized world. Related features are:
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Translated to 25 languages. </LI><LI CLASS="li-itemize">Support for <A HREF="http://www.ietf.org/rfc/rfc3490.txt">IDNA</A>.
-</LI></UL></LI><LI CLASS="li-itemize"><B><FONT SIZE=4><FONT COLOR="#001376">Open Standards:</FONT></FONT></B> <TT>ejabberd</TT> is the first Open Source Jabber server claiming to fully comply to the XMPP standard.
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Fully XMPP compliant.
-</LI><LI CLASS="li-itemize">XML-based protocol.
-</LI><LI CLASS="li-itemize"><A HREF="http://www.ejabberd.im/protocols">Many protocols supported</A>.
-</LI></UL></LI></UL><!--TOC section Additional Features-->
-<H2 CLASS="section"><!--SEC ANCHOR --><A NAME="htoc2"></A>Additional Features</H2><!--SEC END --><P>
-<A NAME="addfeatures"></A>
-</P><BLOCKQUOTE CLASS="quotation"><FONT COLOR="#921700"><I>ejabberd is making inroads to solving the "buggy incomplete server" problem &#X2014;
-Justin Karneges, Founder of the Psi and the Delta projects</I></FONT></BLOCKQUOTE><P>Moreover, <TT>ejabberd</TT> comes with a wide range of other state-of-the-art features:
-</P><UL CLASS="itemize"><LI CLASS="li-itemize">
-Modular
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Load only the modules you want.
-</LI><LI CLASS="li-itemize">Extend <TT>ejabberd</TT> with your own custom modules.
-</LI></UL>
-</LI><LI CLASS="li-itemize">Security
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-SASL and STARTTLS for c2s and s2s connections.
-</LI><LI CLASS="li-itemize">STARTTLS and Dialback s2s connections.
-</LI><LI CLASS="li-itemize">Web Admin accessible via HTTPS secure access.
-</LI></UL>
-</LI><LI CLASS="li-itemize">Databases
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Internal database for fast deployment (Mnesia).
-</LI><LI CLASS="li-itemize">Native MySQL support.
-</LI><LI CLASS="li-itemize">Native PostgreSQL support.
-</LI><LI CLASS="li-itemize">ODBC data storage support.
-</LI><LI CLASS="li-itemize">Microsoft SQL Server support. </LI></UL>
-</LI><LI CLASS="li-itemize">Authentication
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Internal Authentication.
-</LI><LI CLASS="li-itemize">PAM, LDAP and ODBC. </LI><LI CLASS="li-itemize">External Authentication script.
-</LI></UL>
-</LI><LI CLASS="li-itemize">Others
-<UL CLASS="itemize"><LI CLASS="li-itemize">
-Support for virtual hosting.
-</LI><LI CLASS="li-itemize">Compressing XML streams with Stream Compression (<A HREF="http://www.xmpp.org/extensions/xep-0138.html">XEP-0138</A>).
-</LI><LI CLASS="li-itemize">Statistics via Statistics Gathering (<A HREF="http://www.xmpp.org/extensions/xep-0039.html">XEP-0039</A>).
-</LI><LI CLASS="li-itemize">IPv6 support both for c2s and s2s connections.
-</LI><LI CLASS="li-itemize"><A HREF="http://www.xmpp.org/extensions/xep-0045.html">Multi-User Chat</A> module with support for clustering and HTML logging. </LI><LI CLASS="li-itemize">Users Directory based on users vCards.
-</LI><LI CLASS="li-itemize"><A HREF="http://www.xmpp.org/extensions/xep-0060.html">Publish-Subscribe</A> component with support for <A HREF="http://www.xmpp.org/extensions/xep-0163.html">Personal Eventing via Pubsub</A>.
-</LI><LI CLASS="li-itemize">Support for web clients: <A HREF="http://www.xmpp.org/extensions/xep-0025.html">HTTP Polling</A> and <A HREF="http://www.xmpp.org/extensions/xep-0206.html">HTTP Binding (BOSH)</A> services.
-</LI><LI CLASS="li-itemize">IRC transport.
-</LI><LI CLASS="li-itemize">Component support: interface with networks such as AIM, ICQ and MSN installing special tranports.
-</LI></UL>
-</LI></UL><!--CUT END -->
-<!--HTMLFOOT-->
-<!--ENDHTML-->
-<!--FOOTER-->
-<HR SIZE=2><BLOCKQUOTE CLASS="quote"><EM>This document was translated from L<sup>A</sup>T<sub>E</sub>X by
-</EM><A HREF="http://hevea.inria.fr/index.html"><EM>H</EM><EM><FONT SIZE=2><sup>E</sup></FONT></EM><EM>V</EM><EM><FONT SIZE=2><sup>E</sup></FONT></EM><EM>A</EM></A><EM>.</EM></BLOCKQUOTE></BODY>
-</HTML>
@@ -1,136 +0,0 @@
-\documentclass[a4paper,10pt]{article}
-
-%% Packages
-\usepackage{epsfig}
-\usepackage{fancyhdr}
-\usepackage{graphics}
-\usepackage{hevea}
-\usepackage[pdftex,colorlinks,unicode,urlcolor=blue,linkcolor=blue,pdftitle=Ejabberd\
-        Feature\ Sheet,pdfauthor=Sander\
-        Devrieze,pdfsubject=ejabberd,pdfkeywords=ejabberd]{hyperref}
-\usepackage{verbatim}
-\usepackage{color}
-
-%% Index
-% Remove the index anchors from the HTML version to save size and bandwith.
-\newcommand{\ind}[1]{\begin{latexonly}\index{#1}\end{latexonly}}
-
-%% Images
-\newcommand{\logoscale}{0.7}
-\newcommand{\imgscale}{0.58}
-\newcommand{\insimg}[1]{\insscaleimg{\imgscale}{#1}}
-\newcommand{\insscaleimg}[2]{
-  \imgsrc{#2}{}
-  \begin{latexonly}
-    \scalebox{#1}{\includegraphics{#2}}
-  \end{latexonly}
-}
-
-%% Various
-\newcommand{\bracehack}{\def\{{\char"7B}\def\}{\char"7D}}
-\newcommand{\titem}[1]{\item[\bracehack\texttt{#1}]}
-\newcommand{\ns}[1]{\texttt{#1}}
-\newcommand{\jid}[1]{\texttt{#1}}
-\newcommand{\option}[1]{\texttt{#1}}
-\newcommand{\poption}[1]{{\bracehack\texttt{#1}}}
-\newcommand{\node}[1]{\texttt{#1}}
-\newcommand{\term}[1]{\texttt{#1}}
-\newcommand{\shell}[1]{\texttt{#1}}
-\newcommand{\ejabberd}{\texttt{ejabberd}}
-\newcommand{\Jabber}{Jabber}
-
-%% Title page
-\include{version}
-\title{Ejabberd \version\ Feature Sheet}
-\author{Sander Devrieze \\
-  \ahrefurl{mailto:s.devrieze@pandora.be} \\
-  \ahrefurl{xmpp:sander@devrieze.dyndns.org}}
-
-% Options
-\newcommand{\marking}[1]{\textbf{\begin{large}\textcolor{ejblue}{#1}\end{large}}} % Marking enabled
-\newcommand{\quoting}[2][yozhik]{\begin{quotation}\textcolor{#1}{\textit{#2}}\end{quotation}} % Quotes enabled
-\newcommand{\new}{\marginpar{\textcolor{red}{\textsc{new}}}} % Highlight new features
-\newcommand{\improved}{\marginpar{\textcolor{orange}{\textsc{improved}}}} % Highlight improved features
-\setcounter{secnumdepth}{-1} % Disable section numbering
-
-%% To by-pass errors in the HTML version.
-\newstyle{SPAN}{width:20\%; float:right; text-align:left; margin-left:auto;}
-\definecolor{orange}       {cmyk}{0.000,0.333,1.000,0.000}
-
-%% Footnotes
-\begin{latexonly}
-\global\parskip=9pt plus 3pt minus 1pt
-\global\parindent=0pt
-\gdef\ahrefurl#1{\href{#1}{\texttt{#1}}}
-\gdef\footahref#1#2{#2\footnote{\href{#1}{\texttt{#1}}}}
-\end{latexonly}
-\newcommand{\txepref}[2]{\footahref{http://www.xmpp.org/extensions/xep-#1.html}{#2}}
-\newcommand{\xepref}[1]{\txepref{#1}{XEP-#1}}
-
-%% Fancy header
-\fancyhf{}
-\pagestyle{fancy}
-\rhead{\textcolor{ejblue}{The Expandable Jabber/XMPP Daemon.}}
-\renewcommand{\headrule}{{\color{ejblue}%
-\hrule width\headwidth height\headrulewidth \vskip-\headrulewidth}}
-\lhead{\setlength{\unitlength}{-6mm}
-  \begin{picture}(0,0)
-    \put(5.8,3.25){\includegraphics[width=1.3\textwidth]{yozhikheader.png}}
-  \end{picture}}
-
-% Official ejabberd colours
-\definecolor{ejblue}       {cmyk}{1.000,0.831,0.000,0.537} %RGB: 0,0,118	HTML: 000076
-\definecolor{ejgreenyellow}{cmyk}{0.079,0.000,0.275,0.102} %RGB: 209,229,159	HTML: d1e59f
-\definecolor{ejgreendark}  {cmyk}{0.131,0.000,0.146,0.220} %RGB: 166,199,162	HTML: a6c7a2
-\definecolor{ejgreen}      {cmyk}{0.077,0.000,0.081,0.078} %RGB: 216,236,215	HTML: d8ecd7
-\definecolor{ejgreenwhite} {cmyk}{0.044,0.000,0.048,0.020} %RGB: 239,250,238	HTML: effaee
-\definecolor{yozhik}       {cmyk}{0.000,0.837,1.000,0.424} %RGB: 147,0,0	HTML: 930000
-
-\begin{document}
-
-\label{titlepage}
-\begin{titlepage}
-  \maketitle{}
-
-  \thispagestyle{empty}
-
-  \begin{center}
-  {\insscaleimg{\logoscale}{logo.png}
-    \par
-  }
-  \end{center}
-  \quoting{I can thoroughly recommend ejabberd for ease of setup --
-  Kevin Smith, Current maintainer of the Psi project}
-
-\end{titlepage}
-
-\newpage
-% Set the page counter to 2 so that the titlepage and the second page do not
-% have the same page number. This fixes the PDFLaTeX warning "destination with
-% the same identifier".
-\begin{latexonly}
-\setcounter{page}{2}
-\pagecolor{ejgreenwhite}
-\end{latexonly}
-
-% Input introduction.tex
-\input{introduction}
-
-\end{document}
-
-%% TODO
-% * illustrations (e.g. screenshot from web interface)
-% * commented parts
-% * slides, guide and html version
-% * cleaning and improving LaTeX code
-% * key features: something like this (shorter)? (more focussed on Erlang now): "To reach the goal of high
-%   availability, performance and clustering, ejabberd is written in Erlang, a programming language perfectly
-%   suited for this. Besides that, some parts are written in C to also incude the advantages of this language. In
-%   short, ejabberd is a perfect mix of mainly Erlang code, peppered with some C code to get the final touch!"
-%   <picture of a cocktail>
-% * key features: saying that ejabberd the only XMPP server is that can do real clustering:
-%   http://www.jivesoftware.org/forums/thread.jspa?threadID=14602
-%   "What I find interesting is that *no* XMPP servers truly provide clustering. This includes all the commercial
-%   servers. The one partial exception appears to be ejabberd, which can cluster certain data such as sessions,
-%   but not all services such as MUC."
-% * try it today: links to migration tutorials
@@ -1,105 +0,0 @@
-digraph messages {
-	//concentrate=true;
-	subgraph clusterclients {
-		client1 [shape = box];
-		client2 [shape = box];
-		client3 [shape = box];
-
-		style = dashed;
-		label = "Clients";
-	}
-
-	subgraph clusternode1 {
-		subgraph clusterc2s1 {
-			c2s11;
-			c2s12;
-			style = invis;
-		}
-		subgraph clusterservices1 {
-			service11;
-			service12;
-			service13;
-			style = invis;
-		}
-		//subgraph clusters2s1 {
-			//s2s11;
-			//s2s12;
-			//style = invis;
-		//}
-		c2s11     -> auth1;
-		c2s12     -> auth1;
-		auth1     -> c2s11;
-		auth1     -> c2s12;
-		c2s11     -> sm1;
-		c2s11     -> router1;
-		c2s12     -> sm1;
-		c2s12     -> router1;
-		router1   -> local1;
-		router1   -> service11;
-		router1   -> service12;
-		router1   -> service13;
-		router1   -> s2s11;
-		router1   -> s2s12;
-		service11 -> router1;
-		service12 -> router1;
-		service13 -> router1;
-		s2s11     -> router1;
-		s2s12     -> router1;
-		local1    -> sm1;
-		sm1       -> c2s11;
-		sm1       -> c2s12;
-
-		style = dashed;
-		label = "Node1";
-	}
-
-	subgraph clusternode2 {
-		c2s2      -> auth2;
-		auth2     -> c2s2;
-		c2s2      -> sm2;
-		c2s2      -> router2;
-		router2   -> local2;
-		router2   -> service21;
-		router2   -> s2s21;
-		service21 -> router2;
-		s2s21     -> router2;
-		local2    -> sm2;
-		sm2       -> c2s2;
-
-		style = dashed;
-		label = "Node2";
-	}
-
-
-
-	subgraph clusterservers {
-		server1 [shape = box];
-		server2 [shape = box];
-		server3 [shape = box];
-
-		style = dashed;
-		label = "Servers";
-	}
-
-
-	client1 -> c2s11;
-	client2 -> c2s12;
-	client3 -> c2s2;
-	c2s11 -> client1 [constraint=false];
-	c2s12 -> client2 [constraint=false];
-	c2s2  -> client3 [constraint=false];
-
-	s2s11 -> server1 [minlen = 2];
-	s2s12 -> server2 [minlen = 2];
-	s2s21 -> server3 [minlen = 2];
-	server1 -> s2s11 [constraint=false];
-	server2 -> s2s12 [constraint=false];
-	server3 -> s2s21 [constraint=false];
-
-	router1 -> router2;
-	router2 -> router1;
-	sm1     -> sm2;
-	sm2     -> sm1;
-
-	label = "Data Flows";
-}
@@ -1,133 +0,0 @@
-\chapter{Introduction}
-\label{intro}
-
-%% TODO: improve the feature sheet with a nice table to highlight new features.
-
-\quoting{I just tried out ejabberd and was impressed both by ejabberd itself and the language it is written in, Erlang. ---
-Joeri} 
-
-%ejabberd is a free and open source instant messaging server written in Erlang. ejabberd is cross-platform, distributed, fault-tolerant, and based on open standards to achieve real-time communication (Jabber/XMPP).
-
-\ejabberd{} is a \marking{free and open source} instant messaging server written in \footahref{http://www.erlang.org/}{Erlang/OTP}.
-
-\ejabberd{} is \marking{cross-platform}, distributed, fault-tolerant, and based on open standards to achieve real-time communication.
-
-\ejabberd{} is designed to be a \marking{rock-solid and feature rich} XMPP server.
-
-\ejabberd{} is suitable for small deployments, whether they need to be \marking{scalable} or not, as well as extremely big deployments.
-
-%\subsection{Layout with example deployment (title needs a better name)}
-%\label{layout}
-
-%In this section there will be a graphical overview like these:\\
-%\verb|http://www.tipic.com/var/timp/timp_dep.gif| \\
-%\verb|http://www.jabber.com/images/jabber_Com_Platform.jpg| \\
-%\verb|http://www.antepo.com/files/OPN45systemdatasheet.pdf| \\
-
-%A page full with names of Jabber client that are known to work with ejabberd. \begin{tiny}tiny font\end{tiny}
-
-%\subsection{Try It Today}
-%\label{trytoday}
-
-%(Not sure if I will include/finish this section for the next version.)
-
-%\begin{itemize}
-%\item Erlang REPOS
-%\item Packages in distributions
-%\item Windows binary
-%\item source tar.gz
-%\item Migration from Jabberd14 (and so also Jabberd2 because you can migrate from version 2 back to 14) and Jabber Inc. XCP possible.
-%\end{itemize}
-
-\newpage
-\section{Key Features}
-\label{keyfeatures}
-\ind{features!key features}
-
-\quoting{Erlang seems to be tailor-made for writing stable, robust servers. ---
-Peter Saint-Andr\'e, Executive Director of the Jabber Software Foundation}
-
-\ejabberd{} is:
-\begin{itemize}
-\item \marking{Cross-platform:} \ejabberd{} runs under Microsoft Windows and Unix derived systems such as Linux, FreeBSD and NetBSD.
-
-\item \marking{Distributed:} You can run \ejabberd{} on a cluster of machines and all of them will serve the same \Jabber{} domain(s). When you need more capacity you can simply add a new cheap node to your cluster. Accordingly, you do not need to buy an expensive high-end machine to support tens of thousands concurrent users.
-
-\item \marking{Fault-tolerant:} You can deploy an \ejabberd{} cluster so that all the information required for a properly working service will be replicated permanently on all nodes. This means that if one of the nodes crashes, the others will continue working without disruption. In addition, nodes also can be added or replaced `on the fly'.
-
-\item \marking{Administrator Friendly:} \ejabberd{} is built on top of the Open Source Erlang. As a result you do not need to install an external database, an external web server, amongst others because everything is already included, and ready to run out of the box. Other administrator benefits include:
-\begin{itemize}
-\item Comprehensive documentation.
-\item Straightforward installers for Linux, Mac OS X, and Windows. %%\improved{}
-\item Web Administration.
-\item Shared Roster Groups.
-\item Command line administration tool. %%\improved{}
-\item Can integrate with existing authentication mechanisms.
-\item Capability to send announce messages.
-\end{itemize}
-
-\item \marking{Internationalized:} \ejabberd{} leads in internationalization. Hence it is very well suited in a globalized world. Related features are:
-\begin{itemize}
-\item Translated to 25 languages. %%\improved{}
-\item Support for \footahref{http://www.ietf.org/rfc/rfc3490.txt}{IDNA}.
-\end{itemize}
-
-\item \marking{Open Standards:} \ejabberd{} is the first Open Source Jabber server claiming to fully comply to the XMPP standard.
-\begin{itemize}
-\item Fully XMPP compliant.
-\item XML-based protocol.
-\item \footahref{http://www.ejabberd.im/protocols}{Many protocols supported}.
-\end{itemize}
-
-\end{itemize}
-
-\newpage
-
-\section{Additional Features}
-\label{addfeatures}
-\ind{features!additional features}
-
-\quoting{ejabberd is making inroads to solving the "buggy incomplete server" problem ---
-Justin Karneges, Founder of the Psi and the Delta projects}
-
-Moreover, \ejabberd{} comes with a wide range of other state-of-the-art features:
-\begin{itemize}
-\item Modular
-\begin{itemize}
-\item Load only the modules you want.
-\item Extend \ejabberd{} with your own custom modules.
-\end{itemize}
-\item Security
-\begin{itemize}
-\item SASL and STARTTLS for c2s and s2s connections.
-\item STARTTLS and Dialback s2s connections.
-\item Web Admin accessible via HTTPS secure access.
-\end{itemize}
-\item Databases
-\begin{itemize}
-\item Internal database for fast deployment (Mnesia).
-\item Native MySQL support.
-\item Native PostgreSQL support.
-\item ODBC data storage support.
-\item Microsoft SQL Server support. %%\new{}
-\end{itemize}
-\item Authentication
-\begin{itemize}
-\item Internal Authentication.
-\item PAM, LDAP and ODBC.  %%\improved{}
-\item External Authentication script.
-\end{itemize}
-\item Others
-\begin{itemize}
-\item Support for virtual hosting.
-\item Compressing XML streams with Stream Compression (\xepref{0138}).
-\item Statistics via Statistics Gathering (\xepref{0039}).
-\item IPv6 support both for c2s and s2s connections.
-\item \txepref{0045}{Multi-User Chat} module with support for clustering and HTML logging. %%\improved{}
-\item Users Directory based on users vCards.
-\item \txepref{0060}{Publish-Subscribe} component with support for \txepref{0163}{Personal Eventing via Pubsub}.
-\item Support for web clients: \txepref{0025}{HTTP Polling} and \txepref{0206}{HTTP Binding (BOSH)} services.
-\item IRC transport.
-\item Component support: interface with networks such as AIM, ICQ and MSN installing special tranports.
-\end{itemize}
-\end{itemize}
@@ -1,62 +0,0 @@
-			    Release notes
-			    ejabberd 0.9.1
-
-   This document describes the main changes from [25]ejabberd 0.9.
-
-   The code can be downloaded from the [26]download page.
-
-   For more detailed information, please refer to ejabberd [27]User Guide.
-
-
-Groupchat (Multi-user chat and IRC) improvements
-
-   The multi-user chat code has been improved to comply with the latest version
-   of Jabber Enhancement Proposal 0045.
-
-   The IRC (Internet Relay Chat) features now support WHOIS and USERINFO
-   requests.
-
-
-Web interface
-
-   ejabberd modules management features have been added to the web interface.
-   They now allow to start or stop extension module without restarting the
-   ejabberd server.
-
-
-Publish and subscribe
-
-   It is now possible to a subscribe node with a JabberID that includes a
-   resource.
-
-
-Translations
-
-   A new script has been included to help translate ejabberd into new languages
-   and maintain existing translations.
-
-   As a result, ejabberd is now translating into 10 languages:
-     * Dutch
-     * English
-     * French
-     * German
-     * Polish
-     * Portuguese
-     * Russian
-     * Spanish
-     * Swedish
-     * Ukrainian
-
-
-Migration
-
-   No changes have been made to the database. No particular conversion steps
-   are needed. However, you should backup your database before upgrading to a
-   new ejabberd version.
-
-
-Bugfixes
-
-   This release contains several bugfixes and architectural changes. Please
-   refer to the Changelog file supplied with this release for details of all
-   improvements in the ejabberd code.
@@ -1,99 +0,0 @@
-			    Release notes
-			    ejabberd 0.9.8
-			      2005-08-01
-
-   This document describes the main changes in ejabberd 0.9.8. This
-   version prepares the way for the release of ejabberd 1.0, which 
-   is due later this year.
-
-   The code can be downloaded from the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/
-
-   For more detailed information, please refer to ejabberd User Guide
-   on the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/docs.html
-
-
-   Recent changes include....
-
-
-Enhanced virtual hosting
-
-   Virtual hosting applies to many more setting options and
-   features and is transparent. Virtual hosting accepts different
-   parameters for different virtual hosts regarding the following
-   features: authentication method, access control lists and access
-   rules, users management, statistics, and shared roster. The web
-   interface gives access to each virtual host's parameters.
-
-
-Enhanced Publish-Subscribe module
-
-   ejabberd's Publish-Subscribe module integrates enhancements
-   coming from J-EAI, an XMPP-based integration server built on
-   ejabberd. ejabberd thus supports Publish-Subscribe node
-   configuration. It is possible to define nodes that should be
-   persistent, and the number of items to persist. Besides that, it
-   is also possible to define various notification parameters, such
-   as the delivery of the payload with the notifications, and the
-   notification of subscribers when some changes occur on items.
-   Other examples are: the maximum size of the items payload, the
-   subscription approvers, the limitation of the notification to
-   online users only, etc.
-
-
-Code reorganisation and update
-
-   - The mod_register module has been cleaned up.
-   - ODBC support has been updated and several bugs have been fixed.
-
-
-Development API
-
-   To ease the work of Jabber/XMPP developers, a filter_packet hook
-   has been added. As a result it is possible to develop plugins to
-   filter or modify packets flowing through ejabberd.
-
-
-Translations
-
-   - Translations have been updated to support the new Publish-Subscribe features.
-   - A new Brazilian Portuguese translation has been contributed.
-
-
-Web interface
-
-   - The CSS stylesheet from the web interface is W3C compliant.
-
-
-Installers
-
-   Installers are provided for Microsoft Windows and Linux/x86. The
-   Linux installer includes Erlang ASN.1 modules for LDAP
-   authentication support.
-
-
-Bugfixes
-
-   - This release contains several bugfixes and architectural
-     changes. Among other bugfixes include improvements in LDAP
-     authentication. Please refer to the ChangeLog file supplied 
-     with this release regarding all improvements in ejabberd.
-
-
-References
-
-   The ejabberd feature sheet helps comparing with other Jabber/XMPP 
-   servers:
-   http://www.process-one.net/en/projects/ejabberd/docs/features.pdf
-
-   Contributed tutorials of interest are:
-   - Migration from Jabberd1.4 to ejabberd:
-     http://ejabberd.jabber.ru/jabberd1-to-ejabberd
-   - Migration from Jabberd2 to ejabberd:
-     http://ejabberd.jabber.ru/jabberd2-to-ejabberd
-   - Transport configuration for connecting to other networks:
-     http://ejabberd.jabber.ru/tutorials-transports
-
-END
-
@@ -1,88 +0,0 @@
-			    Release notes
-			     ejabberd 0.9
-
-    This document describes the major new features of and changes to
-    ejabberd 0.9, compared to latest public release ejabber 0.7.5.
-
-    For more detailed information, please refer to ejabberd User
-    Guide.
-
-
-Virtual Hosting
-
-    ejabberd now can host several domain on the same instance.
-    This option is enabled by using:
-
-      {hosts, ["erlang-projects.org", "erlang-fr.org"]}.
-
-    instead of the previous host directive.
-
-    Note that you are now using a list of hosts. The main one should
-    be the first listed. See migration section further in this release
-    note for details.
-      
-
-Shared Roster
-
-    Shared roster is a new feature that allow the ejabberd
-    administrator to add jabber user that will be present in the
-    roster of every users on the server.
-    Shared roster are enabled by adding:
-
-            {mod_shared_roster, []}
-
-    at the end of your module list in your ejabberd.cfg file.
-
-
-PostgreSQL (ODBC) support
-
-    This feature is experimental and not yet properly documented. This
-    feature is released for testing purpose.
-
-    You need to have Erlang/OTP R10 to compile with ODBC on various
-    flavour of *nix. You should use Erlang/OTP R10B-4, as this task
-    has became easier with this release. It comes already build in
-    Erlang/OTP Microsoft Windows binary.
-
-    PostgreSQL support is enabled by using the following module in
-    ejabberd.cfg instead of their standard counterpart:
-
-     mod_last_odbc.erl
-     mod_offline_odbc.erl
-     mod_roster_odbc.erl
-
-    The database schema is located in the src/odbc/pq.sql file.
-
-    Look at the src/ejabberd.cfg.example file for more information on
-    how to configure ejabberd with odbc support. You can get support
-    on how to configure ejabberd with a relational database.
-
-
-Migration from ejabberd 0.7.5
-
-    Migration is pretty straightforward as Mnesia database schema
-    conversions is handled automatically. Remember however that you
-    must backup your ejabberd database before migration.
-
-    Here are the following steps to proceed:
-
-    1. Stop your instance of ejabberd.
-
-    2. In ejabberd.cfg, define the host lists. Change the host
-    directive to the hosts one:
-    Before:
-      {host, "erlang-projects.org"}.
-    After:
-      {hosts, ["erlang-projects.org", "erlang-fr.org"]}.
-    Note that when you restart the server the existing users will be
-    affected to the first virtual host, so the order is important. You
-    should keep the previous hostname as the first virtual host.
-
-    3. Restart ejabberd.
-
-
-Bugfixes
-
-    This release contains several bugfixes and architectural changes.
-    Please refer to the Changelog file supplied with this release for
-    details of all improvements in the ejabberd code.
@@ -1,120 +0,0 @@
-			    Release Notes
-			    ejabberd 1.0.0
-			    14 December 2005
-
-   This document describes the main changes in ejabberd 1.0.0. Unique in this
-   version is the compliancy with the XMPP (eXtensible Messaging and Presence
-   Protocol) standard. ejabberd is the first Open Source Jabber server claiming
-   to fully comply to the XMPP standard.
-
-   ejabberd can be downloaded from the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/
-
-   Detailed information can be found in the ejabberd Feature Sheet and User
-   Guide which are available on the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/docs.html
-
-
-   Recent changes include:
-
-
-Server-to-server Encryption for Enhanced Security
-
-  - Support for STARTTLS and SASL EXTERNAL to secure server-to-server traffic
-    has been added.
-  - Also, STARTTLS and Dialback has been implemented for server-to-server (s2s)
-    connections. Detailed information about these new features can be found on
-    http://ejabberd.jabber.ru/s2s-encryption
-  - commonName and dNSName fields matching were introduced to ease the process
-    of retrieving certificates.
-  - Different certificates can be defined for each virtual host.
-
-ODBC Support
-
-  - ODBC support has been improved to allow production use of ejabberd with
-    relational databases.
-  - Support for vCard storage in ODBC has been added.
-  - ejd2odbc.erl is a tool to convert an installation from Erlang's database
-    Mnesia to an ODBC compatible relational database.
-
-Native PostgreSQL Support
-
-  - Native PostgreSQL support gives you a better performance when you use
-    PostgreSQL.
-
-Shared Roster groups
-
-  - Shared Roster groups support has been enhanced. New is the ability to add
-    all registered users to everyone's roster. Detailed information about this
-    new feature can be found on http://ejabberd.jabber.ru/shared-roster-all
-
-Web Interface
-
-   - The web interface internal code has been modified for better integration
-     and compliancy with J-EAI, an ejabberd-based Enterprise Application
-     Integration platform.
-   - More XHTML 1.0 Transitional compliancy work was done.
-
-Transports
-
-   - A transport workaround can be enabled during compilation. To do this, you
-     can pass the "--enable-roster-gateway-workaround" option to the configure
-     script. (./configure --enable-roster-gateway-workaround)
-     This option allows transports to add items with subscription "to" in the
-     roster by sending <presence type='subscribed'/> stanza to user. This option
-     is only needed for JIT ICQ transport.
-     Warning: by enabling this option, ejabberd will not be fully XMPP compliant
-              anymore.
-
-Documentation and Internationalization
-
-   - Documentation has been extended to cover more topics.
-   - Translations have been updated.
-
-Bugfixes
-
-   - This release contains several bugfixes.
-   - Among other bugfixes include improvements to the client-to-server (c2s)
-     connection management module.
-   - Please refer to the ChangeLog file supplied
-     with this release regarding all improvements in ejabberd.
-
-
-   Installation Notes
-
-
-Supported Erlang Version
-
-   - You need at least Erlang/OTP R9C to run ejabberd 1.0.0.
-
-Installation
-
-   Installers are provided for Microsoft Windows and Linux/x86.
-   Installers can be retrieved from:
-   http://www.process-one.net/en/projects/ejabberd/download.html
-
-Migration Notes
-
-   - Before any migration, ejabberd system and database must be properly
-     backed up.
-   - When upgrading an ODBC-based installation, you will need to change the
-     relational database schema. The following SQL commands must be run on the
-     database:
-       CREATE SEQUENCE spool_seq_seq;
-       ALTER TABLE spool ADD COLUMN seq integer;
-       ALTER TABLE spool ALTER COLUMN seq SET DEFAULT nextval('spool_seq_seq');
-       UPDATE spool SET seq = DEFAULT;
-       ALTER TABLE spool ALTER COLUMN seq SET NOT NULL;
-
-References
-
-   Contributed tutorials of interest are:
-   - Migration from Jabberd1.4 to ejabberd:
-     http://ejabberd.jabber.ru/jabberd1-to-ejabberd
-   - Migration from Jabberd2 to ejabberd:
-     http://ejabberd.jabber.ru/jabberd2-to-ejabberd
-   - Transport configuration for connecting to other networks:
-     http://ejabberd.jabber.ru/tutorials-transports
-
-END
-
@@ -1,115 +0,0 @@
-				Release Notes
-				ejabberd 1.1.0
-				24 April 2006
-
-   This document describes the main changes in ejabberd 1.1.0. This version
-   introduce new features including support for new Jabber Enhancement
-   Proposals and several performance improvements enabling deployments on an
-   even larger scale than already possible.
-
-   ejabberd can be downloaded from the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/
-
-   Detailed information can be found in the ejabberd Feature Sheet and User
-   Guide which are available on the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/docs.html
-
-   A complete list of changes is available from:
-   http://support.process-one.net/secure/ReleaseNote.jspa?projectId=10011&styleName=Html&version=10025
-
-
-   Recent changes include:
-
-
-New Jabber Enhancement Proposal support:
-
-  - JEP-0050: Ad-Hoc Commands.
-  - JEP-0138: Stream Compression.
-  - JEP-0175: SASL anonymous.
-
-Anonymous login
-
-  - SASL anonymous.
-  - Anonymous login for clients that do not yet support SASL Anonymous.
-  
-Relational database Support
-
-  - MySQL is now fully supported through ODBC and in native mode.
-  - Various improvements to the native database interfaces.
-  - The migration tool can use relational databases.
-
-Multi-User Chat improvements
-
-  - Logging of room discussion to text file is now supported.
-  - Better reconfiguration support.
-  - Security oriented fixes.
-  - Several improvements and updates to latest JEP-0045.
-
-Performance scalability improvements for large clusters
-
-  - Improved session synchronisation management between cluster nodes.
-  - Internal architecture has been reworked to use generalize Erlang/OTP
-    framework usage.
-  - Speed improvement on logger.
-  - TCP/IP packet reception change for better network throttling and
-    regulation.
-  As a result, these improvements will reduce load on large scale deployments.
-
-XMPP Protocol related improvements
-
-  - XML stanza size can be limited.
-  - Messages are send to all resources with the same highest priority.
-
-Documentation and Internationalization
-
-   - Documentation has been extended to cover more topics.
-   - Translations have been updated.
-
-Web interface
-
-   - XHTML 1.0 compliance.
-
-Bugfixes
-
-   - This release contains many bugfixes on various areas such as Publish-Subscribe, build
-     chain, installers, IRC gateway, ejabberdctl, amongst others.
-   - Please refer to the ChangeLog file supplied with this release regarding
-     all improvements in ejabberd.
-
-
-
-   Installation Notes
-
-Supported Erlang Version
-
-   - You need at least Erlang/OTP R9C-2 to run ejabberd 1.1.0.
-
-Installation
-
-   Installers are provided for Microsoft Windows, Linux/x86 and MacOSX/PPC.
-   Installers can be retrieved from:
-   http://www.process-one.net/en/projects/ejabberd/download.html
-
-Migration Notes
-
-   - Before any migration, ejabberd system and database must be properly
-     backed up.
-   - The database schema has not been changed comparing to version 1.0.0 and
-     consequently it does not require any migration.
-
-
-References
-
-   Contributed tutorials and documents of interest are:
-   - Migration from Jabberd1.4, Jabberd2 and WPJabber to ejabberd:
-     http://ejabberd.jabber.ru/migrate-to-ejabberd     
-   - Transport configuration for connecting to other networks:
-     http://ejabberd.jabber.ru/tutorials-transports
-   - Using ejabberd with MySQL native driver:
-     http://support.process-one.net/doc/display/MESSENGER/Using+ejabberd+with+MySQL+native+driver
-   - Anonymous User Support:
-     http://support.process-one.net/doc/display/MESSENGER/Anonymous+users+support
-   - Frequently Asked Questions:
-     http://ejabberd.jabber.ru/faq
-
-END
@@ -1,119 +0,0 @@
-				Release Notes
-				ejabberd 1.1.1 
-				28 April 2006
-
-   This document describes the main changes in ejabberd 1.1.x. This version
-   introduce new features including support for new Jabber Enhancement
-   Proposals and several performance improvements enabling deployments on an
-   even larger scale than already possible.
-
-   This release fix a security issue introduced in ejabberd 1.1.0. In SASL
-   mode, anonymous login was enabled as a default. Upgrading ejabberd 1.1.0 to
-   ejabberd 1.1.1 is highly recommended.
-
-   ejabberd can be downloaded from the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/
-
-   Detailed information can be found in the ejabberd Feature Sheet and User
-   Guide which are available on the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/docs.html
-
-   A complete list of changes is available from:
-   http://support.process-one.net/secure/ReleaseNote.jspa?projectId=10011&styleName=Html&version=10025
-
-
-   Recent changes include:
-
-
-New Jabber Enhancement Proposal support:
-
-  - JEP-0050: Ad-Hoc Commands.
-  - JEP-0138: Stream Compression.
-  - JEP-0175: SASL anonymous.
-
-Anonymous login
-
-  - SASL anonymous.
-  - Anonymous login for clients that do not yet support SASL Anonymous.
-  
-Relational database Support
-
-  - MySQL is now fully supported through ODBC and in native mode.
-  - Various improvements to the native database interfaces.
-  - The migration tool can use relational databases.
-
-Multi-User Chat improvements
-
-  - Logging of room discussion to text file is now supported.
-  - Better reconfiguration support.
-  - Security oriented fixes.
-  - Several improvements and updates to latest JEP-0045.
-
-Performance scalability improvements for large clusters
-
-  - Improved session synchronisation management between cluster nodes.
-  - Internal architecture has been reworked to use generalize Erlang/OTP
-    framework usage.
-  - Speed improvement on logger.
-  - TCP/IP packet reception change for better network throttling and
-    regulation.
-  As a result, these improvements will reduce load on large scale deployments.
-
-XMPP Protocol related improvements
-
-  - XML stanza size can be limited.
-  - Messages are send to all resources with the same highest priority.
-
-Documentation and Internationalization
-
-   - Documentation has been extended to cover more topics.
-   - Translations have been updated.
-
-Web interface
-
-   - XHTML 1.0 compliance.
-
-Bugfixes
-
-   - This release contains many bugfixes on various areas such as Publish-Subscribe, build
-     chain, installers, IRC gateway, ejabberdctl, amongst others.
-   - Please refer to the ChangeLog file supplied with this release regarding
-     all improvements in ejabberd.
-
-
-
-   Installation Notes
-
-Supported Erlang Version
-
-   - You need at least Erlang/OTP R9C-2 to run ejabberd 1.1.0.
-
-Installation
-
-   Installers are provided for Microsoft Windows, Linux/x86 and MacOSX/PPC.
-   Installers can be retrieved from:
-   http://www.process-one.net/en/projects/ejabberd/download.html
-
-Migration Notes
-
-   - Before any migration, ejabberd system and database must be properly
-     backed up.
-   - The database schema has not been changed comparing to version 1.0.0 and
-     consequently it does not require any migration.
-
-
-References
-
-   Contributed tutorials and documents of interest are:
-   - Migration from Jabberd1.4, Jabberd2 and WPJabber to ejabberd:
-     http://ejabberd.jabber.ru/migrate-to-ejabberd     
-   - Transport configuration for connecting to other networks:
-     http://ejabberd.jabber.ru/tutorials-transports
-   - Using ejabberd with MySQL native driver:
-     http://support.process-one.net/doc/display/MESSENGER/Using+ejabberd+with+MySQL+native+driver
-   - Anonymous User Support:
-     http://support.process-one.net/doc/display/MESSENGER/Anonymous+users+support
-   - Frequently Asked Questions:
-     http://ejabberd.jabber.ru/faq
-
-END
@@ -1,119 +0,0 @@
-				Release Notes
-				ejabberd 1.1.2
-			      27 September 2006
-
-   This document describes the main changes in ejabberd 1.1.2.
-
-   This version is a major improvement over ejabberd 1.1.1, improving the
-   overall behaviour of the server in many areas. Users of ejabberd 1.1.1
-   should upgrade to this new release for improved robustness and compliance.
-
-   ejabberd can be downloaded from the Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/
-
-   Detailed information can be found in the Feature Sheet and in the
-   Installation and Operation Guide which are both available on the
-   Process-one website:
-   http://www.process-one.net/en/projects/ejabberd/docs.html
-
-   ejabberd includes 44 improvements. A complete list of changes can be
-   retrieved from:
-   http://redir.process-one.net/ejabberd-1.1.2
-
-
-   Recent changes include:
-
-LDAP Improvements
-
-  - Major improvements have been made on the LDAP module. It is now more
-    flexible and more robust.
-
-HTTP Polling Fixes
-
-  - The HTTP polling modules have been fixed and improved: the connections are
-    closed properly and polled messages cannot be lost anymore.
-
-Roster Management Improvement
-
-  - Roster management improvements increase reliability, especially in cases
-  where users are on different servers.
-  - Shared rosters are more reliable.
-
-Improved Robustness
-
-  - It is now possible to limit the number of opened connections for a single
-  user.
-
-Relational databases
-
-  - Database support: Microsoft SQL Server is now officially supported in ODBC
-  mode.
-
-Publish-Subscribe Improvement
-
-  - Restricting node creation with a dedicated ACL rule is now possible.
-
-Localization
-
-  - A Czech translation has been added.
-  - Translations have been updated.
-
-Binary Installer
-
-  - New binary installer for Windows including all requirements.
-  - Improved installers for Linux and MacOSX (PowerPC)
-
-XMPP Compliancy
-
-  - Some protocol compliance fix have been added, after the Portland XMPP
-    Interop Meeting in July.
-
-Miscelanous
-
-  - MUC have been improved (logging rendering).
-  - The command line tool ejabberdctl has been improved.
-  - The build chain has been improved, including MacOSX support.
-  - The documentation has been improved and updated to describe the new
-    features.
-
-Bugfixes
-
-   - Anonymous login bugfixes.
-   - Please refer to the ChangeLog file supplied with this release regarding
-     all improvements in ejabberd.
-
-
-   Installation Notes
-
-Supported Erlang Version
-
-   - You need at least Erlang/OTP R9C-2 to run ejabberd 1.1.2.
-   - The recommanded version is Erlang/OTP R10B-10.
-   - Erlang/OTP R11B has not yet been fully certified for ejabberd.
-
-Installation
-
-   Installers are provided for Microsoft Windows, Linux/x86 and MacOSX/PPC.
-   They can be retrieved from:
-   http://www.process-one.net/en/projects/ejabberd/download.html
-
-Migration Notes
-
-   - Before any migration, ejabberd system and database must be properly
-   backed up.
-   - The relational database schema has changed between version 1.1.1 and
-   1.1.2. An "askmessage" column needs to be added in the "rosterusers" table
-   to perform the migration.
-
-
-References
-
-   Contributed tutorials and documents of interest are:
-   - Migration from other XMPP servers to ejabberd:
-     http://ejabberd.jabber.ru/migrate-to-ejabberd     
-   - Transport configuration for connecting to other networks:
-     http://ejabberd.jabber.ru/tutorials-transports
-   - Frequently Asked Questions:
-     http://ejabberd.jabber.ru/faq
-
-END
@@ -1,14 +0,0 @@
-			    Release Notes
-			    ejabberd 1.1.3
-			   2 February 2007
-
-  ejabberd 1.1.3 is a security fix release for ejabberd roster ODBC
-  module.
-
-  The upgrade is only necessary if you are using ejabberd with the
-  mod_roster_odbc.
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/projects/ejabberd/
-
-END
@@ -1,31 +0,0 @@
-			      Release Notes
-			      ejabberd 1.1.4
-			   3 september 2007
-
-  ejabberd 1.1.4 is a bugfix release for ejabberd 1.1.x branch.
-
-  ejabberd 1.1.4 includes 10 improvements. A complete list of changes
-  can be retrieved from:
-   http://redir.process-one.net/ejabberd-1.1.4
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/projects/ejabberd/
-
-
-   Recent changes include:
-
- Better LDAP support.
- Support for UTF-8 with MySQL 5.
- Roster migration script bugfixes.
- Performance improvements on user removal.
- Traffic shapers bugfix.
- Configuration: host value is now case insensitive.
- Build: ejabberd.cfg file is not overwritten with 'make install' command.
-
-
-Bugs report
-
-  You can officially report bugs on Process-one support site:
-  http://support.process-one.net/
-
-END
@@ -1,208 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.0.0
-                            21 February 2008
-
-  ejabberd 2.0.0 is a major new version for ejabberd adding plenty of
-  new features, performance and scalability improvements and
-  architectural changes.
-
-  ejabberd 2.0.0 includes more than 200 improvements over ejabberd
-  1.1.x. A complete list of changes can be retrieved from:
-   http://redir.process-one.net/ejabberd-2.0.0
-
-  The new code can be downloaded from ejabberd downloads page:
-     http://www.process-one.net/en/ejabberd/
-
-
-   Recent changes include:
-
-
-* Clustering and Architecture
-
- New front-end and back-end cluster architecture for better
-  scalability and robustness. Back-end nodes are able to run a fully
-  fault-tolerant XMPP router and services, but you can now deploy
-  many front-end nodes to share the load without needing to synchronize
-  any state with the back-ends.
- All components now run in cluster mode (For example, Multi-User chat
-  service and file transfer proxy).
- New load balancing algorithm to support Multi-User chat and gateways
-  clustering. More generally it supports any external component load
-  balancing.
- ejabberd watchdog to receive warning on suspicious resources consumption.
- Traffic shapers are now supported on components. This protect
-  ejabberd from components and gateways abuses.
-
-
-* Publish and Subscribe
-
- Complete rewrite of the PubSub module. The new PubSub module is
-  plugin-based, allowing developers to create new nodes type. Any
-  application can be plugged to ejabberd and can provide rich presence
-  as a pubsub plugin.
- Personal Eventing via Pubsub support (XEP-0163). This module is
-  implemented as a PubSub service. It supports user mood (XEP-107),
-  User Tune (XEP-118), user location (XEP-0080) or user avatar
-  (XEP-0084) for example.
-
-
-* Server to Server (s2s)
-
- More robust code with connection timeout implementation.
- Support for multiple s2s connections per domain.
- s2s whitelist and blacklist support.
- s2s retrial interval.
-
-
-* LDAP
-
- Many enterprise-class enhancements such as better behaviour under
-  heavy load.
- Support for LDAP servers pool.
- Simplified use of virtual hosting with LDAP with domain substitution
-  in config.
- Ability to match on several userid attributes.
-
-
-* Multi-User Chat
-
- Clustering and load balancing support.
- Ability to define default room configuration in ejabberd config file.
- Many anti abuse features have been added:
-  . New ACL to limit the creation of persistent room to authorized users.
-  . Ability to define the maximum number of users per room.
-  . Limitation of the rate of message and presence packets.
-  . Limitation of the maximum number of room a user can join at the same time.
-
-
-* File Transfer
-
- XEP-0065 - Proxy65 file transfer proxy. The proxy can run in
-  cluster mode.
-
-
-* Authentication
-
- PAM (Pluggable Authentication Modules) support on *nix systems.
- External Authentication protocol is now fully documented.
-
-
-* Web Client Support
-
- XEP-0124 - BOSH support: BOSH (Bidirectional-streams Over
-  Synchronous HTTP) was formerly known as "HTTP binding". It provides
-  an efficient alternative to HTTP polling for scalable Web based chat
-  solutions.
- HTTP module can now serve static documents (with
-  mod_http_fileserver). It is needed for high-performance Web 2.0 chat
-  / IM application. System administrators can now avoid using a proxy
-  (like Apache) that handles much less simultaneous than ejabberd HTTP
-  module.
- Added limitations enforcement on HTTP poll and HTTP bind modules
-  (bandwidth, packet size).
-
-
-* System Administration
-
- XEP-0133 - Service administration support. System administrators can
-  now perform lot of ejabberd related admin tasks from their XMPP
-  client, through adhoc commands.
- Dynamic log levels: Improved logging with more log levels. You can
-  now change the loglevel at run time. No performance penalty is
-  involved when less verbose levels are used.
- The ejabberdctl command-line administration script now can start 
-  and stop ejabberd. It also includes other useful options.
-
-
-* Localization
-
- ejabberd is now translated to 24 languages: Catalan, Chinese, Czech,
-  Dutch, English, Esperanto, French, Galician, German, Italian, Japanese, 
-  Norwegian, Polish, Portuguese, Portuguese (Brazil), Russian, Slovak, 
-  Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese, Walloon.
-
-
-* Build and Installer
-
- Many launch script improvements.
- New translations. The binary installer is now available in Chinese,
-  Dutch, English, French, German, Spanish, Russian.
- Makefile now implements uninstall command.
- Full MacOSX compliance in Makefile.
- Configure script is clever at finding libraries in unusual places.
-
-
-* Development API
-
- Several hooks have been added for module developers (most notably
-  presence related hooks).
- HTTP request handler to write HTTP based plugins.
- Manage connections IP address.
-
-
-* Bugfixes
-
- ejabberd 2.0.0 also fixes numerous small bugs :) Read the full
-  changelog for details.
-
-
-
-   Important Note:
-
- Since this release, ejabberd requires Erlang R10B-5 or higher. 
-  R11B-5 is the recommended version. R12 is not yet officially 
-  supported, and is not recommended for production servers.
-
-
-
-   Upgrading From ejabberd 1.x:
-
- If you upgrade from a version older than 1.1.4, please check the
-  Release Notes of the intermediate versions for additional
-  information about database or configuration changes.
-
- The database schemas didn't change since ejabberd 1.1.4. Of course,
-  you are encouraged to make a database backup of your SQL database,
-  or your Mnesia spool directory before upgrading ejabberd.
-
- The ejabberdctl command line administration script is improved in
-  ejabberd 2.0.0, and now it can start and stop ejabberd. If you
-  already wrote your own start script for ejabberd 1.x, you can
-  continue using it, or try ejabberdctl. For your convenience, the
-  ejabberd Guide describes all the ejabberd and Erlang options used by
-  ejabberdctl.
-
- The example ejabberd.cfg file has been reorganized, but its format
-  and syntax rules are the same. So, you can continue using your
-  ejabberd.cfg file from 1.x if you want. The most important changes
-  are described now.
-
- The 'ssl' option is no longer available in the listening ports. For
-  legacy SSL encryption use the option 'tls'. For STARTTLS encryption
-  as defined in RFC 3920 XMPP-CORE use the option 'starttls'. Check
-  the ejabberd Guide for more information about configuring listening
-  ports.
-
- The options 'welcome_message' and 'registration_watchers' are now
-  options of the module mod_register. Check in the ejabberd Guide how
-  to configure that module.
-
- To enable PEP support in mod_pubsub, you need to enable it in the
-  mod_pubsub configuration, and also enable the new module
-  mod_caps. Check the section about mod_pubsub in the ejabberd Guide.
-
- Other new features and improvements also require changes in the
-  ejabberd.cfg, like mod_http_bind, mod_http_fileserver, mod_proxy65,
-  loglevel, pam_service, and watchdog_admins. Search for those words
-  in the ejabberd Guide and the example ejabberd.cfg.
-
-
-
-   Bug Reports
-
-  You can officially report bugs on Process-one support site:
-  https://support.process-one.net/
-
-
-END
@@ -1,30 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.0.1
-                               20 May 2008
-
-  ejabberd 2.0.1 is a bugfix release for ejabberd 2.0.x branch.
-
-  ejabberd 2.0.1 includes 10 improvements and 32 bugfixes.
-  A complete list of changes can be retrieved from:
-     http://redir.process-one.net/ejabberd-2.0.1
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/projects/ejabberd/
-
-
-   Recent changes include:
-
- Erlang R12 support.
- Better LDAP handling.
- PubSub bugfixes.
- Documentation improvements.
- inband registration limitation per IP.
- s2s improvements.
-
-Bugs report
-
-  You can officially report bugs on Process-one support site:
-  http://support.process-one.net/
-
-END
@@ -1,34 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.0.2
-                             28 August 2008
-
-  ejabberd 2.0.2 is the second bug fix release for ejabberd 2.0.x branch.
-
-  ejabberd 2.0.2 includes many bugfixes and a few improvements.
-  A complete list of changes can be retrieved from:
-     http://redir.process-one.net/ejabberd-2.0.2
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/ejabberd/
-
-
-  Recent changes include:
-
- Anti-abuse feature: client blacklist support by IP.
- Guide: new section Securing ejabberd; improved usability.
- LDAP filter optimisation: ability to filter user in ejabberd and not LDAP.
- MUC improvements: room options to restrict visitors; broadcast reasons.
- Privacy rules: fix MySQL storage.
- Pub/Sub and PEP: many improvements in implementation and protocol compliance.
- Proxy65: send valid SOCKS5 reply (removed support for Psi < 0.10).
- Web server embedded: better support for HTTPS.
- Binary installers: SMP on Windows; don't remove config when uninstalling.
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
-
-END
@@ -1,35 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.0.3
-                             14 January 2009
-
-  ejabberd 2.0.3 is the third bugfix release for ejabberd 2.0.x branch.
-
-  ejabberd 2.0.3 includes several bugfixes and a few improvements.
-  A complete list of changes can be retrieved from:
-     http://redir.process-one.net/ejabberd-2.0.3
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/ejabberd/
-
-
-  Recent changes include:
-
- Do not ask certificate for client (c2s)
- Check digest-uri in SASL digest authentication
- Use send timeout to avoid locking on gen_tcp:send
- Fix ejabberd reconnection to database
- HTTP-Bind: handle wrong order of packets
- MUC: Improve traffic regulation management
- PubSub: Several bugfixes and improvements for best coverage of XEP-0060 v1.12
- Shared Roster Groups: push immediately membership changes
- Rotate also sasl.log on "reopen-log" command
- Binary Windows installer: better detect "Error running Post Install Script"
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
-
-END
@@ -1,44 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.0.4
-
-  ejabberd 2.0.4 is the fourth bugfix release for ejabberd 2.0.x branch.
-
-  ejabberd 2.0.4 includes several bugfixes.
-  A detailed list of changes can be retrieved from:
-     http://redir.process-one.net/ejabberd-2.0.4
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/ejabberd/
-
-
-  The changes are:
-
- Ensure ID attribute in roster push is unique
- Authentication: Fix Anonymous auth when enabled with broken ODBC
- Authentication: Unquote correctly backslash in DIGEST-MD5 SASL responses
- Authentication: Cancel presence subscriptions on account deletion
- LDAP: Close a connection on tcp_error
- LDAP: Implemented queue for pending queries
- LDAP: On failure of LDAP connection, waiting is done on pending queue
- MUC: Owner of a password protected room must also provide the password
- MUC: Prevent XSS in MUC logs by linkifying only a few known protocols
- Privacy rules: Items are now processed in the specified order
- Privacy rules: Fix to correctly block subscription requests
- Proxy65: If ip option is not defined, take an IP address of a local hostname
- PubSub: Add roster subscription handling; send PEP events to all resources
- PubSub: Allow node creation without configure item
- PubSub: Requesting items on a node which exists, but empty returns an error
- PEP: Fix sending notifications to other domains and s2s
- S2S: Fix problem with encrypted connection to Gtalk and recent Openfire
- S2S: Workaround to get DNS SRV lookup to work on Windows machine
- Shared Roster Groups: Fix to not resend authorization request
- WebAdmin: Fix encryption problem for ejabberd_http after timeout
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
-
-END
@@ -1,33 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.0.5
-
-  ejabberd 2.0.5 is the fifth bugfix release in ejabberd 2.0.x branch.
-
-  ejabberd 2.0.5 includes three bugfixes.
-  More details of those fixes can be retrieved from:
-     http://redir.process-one.net/ejabberd-2.0.5
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/ejabberd/
-
-
-  The changes are:
-
- Fix two problems introduced in ejabberd 2.0.4: subscription request
-  produced many authorization requests with some clients and
-  transports; and subscription requests were not stored for later
-  delivery when receiver was offline.
-
- Fix warning in expat_erl.c about implicit declaration of x_fix_buff
-
- HTTP-Bind (BOSH): Fix a missing stream:error in the returned
-  remote-stream-error stanza
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
-
-END
@@ -1,281 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.0
-
-  ejabberd 2.1.0 is a major new version for ejabberd adding many
-  new features, performance and scalability improvements.
-
-  ejabberd 2.1.0 includes many new features, improvements and bug fixes.
-  A complete list of changes can be retrieved from:
-   http://redir.process-one.net/ejabberd-2.1.0
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/ejabberd/
-
-
-  New features and improvements:
-
-* Anti-abuse
- Captcha support (XEP-0158). The example script uses ImageMagick.
- New option: registration_timeout to limit registrations by time
- Use send timeout to avoid locking on gen_tcp:send
- mod_ip_blacklist: client blacklist support by IP
-
-* API
- ejabberd_http provides Host, Port, Headers and Protocol in HTTP requests
- Export function to create MUC room
- New events: s2s_send_packet and s2s_receive_packet
- New event: webadmin_user_parse_query when POST in web admin user page
- Support distributed hooks over the cluster
-
-* Authentification
- Extauth responses: log strange responses and add timeout
-
-* Binary Installer
- Includes exmpp library to support import/export XML files
-
-* Caps
- Remove useless caps tables entries
- mod_caps must handle correctly external contacts with several resources
- Complain if mod_caps disabled and mod_pubsub has PEP plugin enabled
-
-* Clustering and Architecture
-
-* Configuration
- Added option access_max_user_messages for mod_offline
- Added option backlog for ejabberd_listener to increase TCP backlog
- Added option define_macro and use_macro
- Added option include_config_file to include additional configuration files
- Added option max_fsm_queue
- Added option outgoing_s2s_options to define IP address families and timeout
- Added option registration_timeout to ejabberd.cfg.example
- Added option s2s_dns_options to define DNS timeout and retries
- Added option ERL_OPTIONS to ejabberdctl.cfg
- Added option FIREWALL_WINDOW to ejabberdctl.cfg
- Added option EJABBERD_PID_PATH to ejabberdctl.cfg
- Deleted option user_max_messages of mod_offline
- Check certfiles are readable on server start and listener start
- Config file management mix file reading and sanity check
- Include example PAM configuration file: ejabberd.pam
- New ejabberd listener: ejabberd_stun
- Support to bind the same port to multiple interfaces
- New syntax to specify the IP address and IPv6 in listeners
-  configuration. The old options {ip,{1,2,3,4}} and inet6 are
-  supported even if they aren't documented.
- New syntax to specify the network protocol: tcp or udp
- Report error at startup if a listener module isn't available
- Only listen in a port when actually ready to serve requests
- In default config, only local accounts can create rooms and PubSub nodes
-
-* Core architecture
- More verbose error reporting for xml:element_to_string
- Deliver messages when first presence is Invisible
- Better log message when config file is not found
- Include original timestamp on delayed presences
-
-* Crypto
- Do not ask certificate for client (c2s)
- SSL code remove from ejabberd in favor of TLS
- Support Zlib compression after STARTTLS encryption
- tls v1 client hello
-
-* Documentation
- Document possible default MUC room options
- Document service_check_from in the Guide
- Document s2s_default_policy and s2s_host in the Guide
- new command and guide instructions to change node name in a Mnesia database
-
-* ejabberd commands
- ejabberd commands: separate command definition and calling interface
- access_commands restricts who can execute what commands and arguments
- ejabberdctl script now displays help and categorization of commands
-
-* HTTP Binding and HTTP Polling
- HTTP-Bind: module optimization and clean-up
- HTTP-Bind: allow configuration of max_inactivity timeout
- HTTP-Poll: turn session timeout into a config file parameter
-
-* Jingle
- STUN server that facilitates the client-to-client negotiation process
-
-* LDAP
- Faster reconnection to LDAP servers
- LDAP filter optimisation: Add ability to filter user in ejabberd and not LDAP
- LDAP differentiates failed auth and unavailable auth service
- Improve LDAP logging
- LDAPS support using TLS.
-
-* Localization
- Use Gettext PO for translators, export to ejabberd MSG
- Support translation files for additional projects
- Most translations are updated to latest code
- New translation to Greek language
-
-* Multi-User Chat (MUC)
- Allow admins to send messages to rooms
- Allow to store room description
- Captcha support in MUC: the admin of a room can configure it to
-  require participants to fill a captcha to join the room.
- Limit number of characters in Room ID, Name and Description
- Prevent unvoiced occupants from changing nick
- Support Result Set Management (XEP-0059) for listing rooms
- Support for decline of invitation to MUC room
- mod_muc_log options: plaintext format; filename with only room name
-
-* Performance
- Run roster_get_jid_info only if privacy list has subscription or group item
- Significant PubSub performance improvements
-
-* Publish-Subscribe
- Add nodetree filtering/authorization
- Add subscription option support for collection nodes
- Allow Multiple Subscriptions
- Check option of the nodetree instead of checking configuration
- Implement whitelist authorize and roster access model
- Implicit item deletion is not notified when deleting node
- Make PubSub x-data configuration form handles list value
- Make default node name convention XEP-compatible, document usage of hierarchy
- Node names are used verbatim, without separating by slash, unless a
-  node plugin uses its own separator
- Send authorization update event (XEP-0060, 8.6)
- Support of collection node subscription options
- Support ODBC storage. Experimental, needs more testing.
-
-* Relational databases:
- Added MSSQL 2000 and 2005
- Privacy rules storage in MySQL
- Implement reliable ODBC transaction nesting
-
-* Source Package
- Default installation directories changed. Please see the upgrade notes below.
- Allow more environment variable overrides in ejabberdctl
- ChangeLog is not edited manually anymore; it's generated automatically.
- Install the ejabberd Guide
- Install the ejabberd include files
- New option for the 'configure' script: --enable-user which installs
-  ejabberd granting permission to manage it to a regular system user;
-  no need to use root account to.
- Only try to install epam if pam was enabled in configure script
- Spool, config and log dirs: owner writes, group reads, others do nothing.
- Provides an example ejabberd.init file
-
-* S2S
- Option to define s2s outgoing behaviour: IPv4, IPv6 and timeout
- DNS timeout and retries, configurable with s2s_dns_options.
-
-* Shared rosters
- When a member is added/removed to group, send roster upgrade to group members
-
-* Users management
- When account is deleted, cancel presence subscription for all roster items
-
-* XEP Support
- Added XEP-0059 Result Set Management (for listing rooms)
- Added XEP-0082 Date Time
- Added XEP-0085 Chat State Notifications
- Added XEP-0157 Contact Addresses for XMPP Services
- Added XEP-0158 CAPTCHA Forms (in MUC rooms)
- Added STUN server, for XEP-0176: Jingle ICE-UDP Transport Method
- Added XEP-0199 XMPP Ping
- Added XEP-0202 Entity Time
- Added XEP-0203 Delayed Delivery
- Added XEP-0227 Portable Import/Export Format for XMPP-IM Servers
- Added XEP-0237 Roster Versioning
-
-* Web Admin
- Display the connection method of user sessions
- Cross link of ejabberd users in the list of users and rosters
- Improved the browsing menu: don't disappear when browsing a host or node
- Include Last-Modified HTTP header in responses to allow caching
- Make some Input areas multiline: options of listening ports and modules
- Support PUT and DELETE methods in ejabberd_http
- WebAdmin serves Guide and links to related sections
-
-* Web plugins
- mod_http_fileserver: new option directory_indices, and improve logging
-
-
-   Important Notes:
-
- ejabberd 2.1.0 requires Erlang R10B-9 or higher.
-  R12B-5 is the recommended version. Support for R13B is experimental.
-
-
-   Upgrading From ejabberd 1.x.x:
-
- Check the Release Notes of the intermediate versions for additional
-  information about database or configuration changes.
-
-
-   Upgrading From ejabberd 2.0.x:
-
- The database schemas have three changes since ejabberd 2.0.x.
-  Check the database creation SQL files and update your database.
-  1) New table roster_version to support roster versioning.
-  2) Six new tables for optional pubsub ODBC storage.
-  3) Some tables in the MySQL database have a new created_at column.
-
- As usual, it is recommended to backup the Mnesia spool directory and
-  your SQL database (if used) before upgrading ejabberd.
-
- Between ejabberd 2.0.0 and 2.0.5, mod_pubsub used "default" as the
-  default node plugin. But in 2.1.0 this is renamed to "hometree".
-  You have to edit your ejabberd config file and replace those names.
-  If you used ejabberd 2.0.5 or older, the database will be updated
-  automatically. But if you were using ejabberd from SVN, you must
-  manually run ejabberdctl with the command: rename_default_nodeplugin.
-  Running this command on already updated database does nothing.
-
- The listener options 'ip' and 'inet6' are not documented anymore
-  but they are supported and you can continue using them.
-  There is a new syntax to define IP address and IP version.
-  As usual, check the ejabberd Guide for more information.
-
- The log file sasl.log is now called erlang.log
-
- ejabberdctl commands now have _ characters instead of -.
-  For backwards compatibility, it is still supported -.
-
- mod_offline has a new option: access_max_user_messages.
-  The old option user_max_messages is no longer supported.
-
- If you upgrade from ejabberd trunk SVN, you must execute this:
-  $ ejabberdctl rename_default_nodeplugin
-
- Default installation directories changed a bit:
-  * The Mnesia spool files that were previously stored in
-      /var/lib/ejabberd/db/NODENAME/*
-    are now stored in
-      /var/lib/ejabberd/*
-  * The directories
-      /var/lib/ejabberd/ebin
-      /var/lib/ejabberd/priv
-    and their content is now installed as
-      /lib/ejabberd/ebin
-      /lib/ejabberd/priv
-  * There is a new directory with Erlang header files:
-      /lib/ejabberd/include
-  * There is a new directory for ejabberd documentation,
-    which includes the Admin Guide and the release notes::
-      /share/doc/ejabberd
-
- How to upgrade from previous version to ejabberd 2.1.0:
-  1. Stop the old instance of ejabberd.
-  2. Run 'make install' of new ejabberd 2.1.0 to create the new directories.
-  3. Copy the content of your old directory:
-       /var/lib/ejabberd/db/NODENAME/
-     to the new location:
-       /var/lib/ejabberd/
-     so you will have the files like this:
-       /var/lib/ejabberd/acl.DCD ...
-  4. You can backup the content of those directories and delete them:
-       /var/lib/ejabberd/ebin
-       /var/lib/ejabberd/priv
-       /var/lib/ejabberd/db
-  5. Now try to start your new ejabberd 2.1.0.
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,47 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.1
-
-  ejabberd 2.1.1 is the first bugfix release in ejabberd 2.1.x branch.
-
-  ejabberd 2.1.1 includes several important bugfixes.
-  More details of those fixes can be retrieved from:
-     http://redir.process-one.net/ejabberd-2.1.1
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/ejabberd/
-
-
-  The changes are:
-
-* Core
- Call ejabberd_router:route/3 instead of sending a message
- Can't connect if starttls_required and zlib are set
- Routes vCard request to the occupant full JID, but should to bare JID
- S2S: fix allow_host/2 on subdomains. added hook s2s_allow_host
-
-* MUC
- Support converting one-to-one chat to MUC
- Add support for serving a Unique Room Name
-
-* Publish Subscribe
- Receive same last published PEP items at reconnect if several resources online
- Typo in mod_pubsub_odbc breaks Service Discovery and more
-
-* Web
- Fix memory and port leak when TLS is enabled in HTTP
- WebAdmin doesn't report correct last activity with postgresql backend
- Option to define custom HTTP headers in mod_http_fileserver
- Show informative webpage when browsing the HTTP-Poll page
-
-* Other
- Change captcha.sh to not depend on bash
- Generate main XML file also when exporting only a vhost
- Fix last newline in ejabberdctl result
- Guide: fix -setcookie, mod_pubsub_odbc host, content_types
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,39 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.10
-
-  ejabberd 2.1.10 includes a few bugfixes and improvements.
-
-  Read more details about the changes in:
-    http://redir.process-one.net/ejabberd-2.1.10
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  The major changes are:
-
-* Erlang/OTP compatibility
- Support Erlang/OTP R15B regexp and drivers (EJAB-1521)
- Fix modules update in R14B04 and higher
- Fix modules update of stripped beams (EJAB-1520)
-
-* XMPP Core
- Fix presence problem in C2S after first unavailable (EJAB-1466)
- Fix bug on S2S shaper when TLS is used
- Prevent overload of incoming S2S connections
-
-* XEPs
- BOSH: Get rid of useless mnesia transaction (EJAB-1502)
- MUC: Don't reveal invitee resource when room informs invitor
- Privacy: Activate "Blocked Contacts" to current c2s connection (EJAB-1519)
- Privacy: Always allow packets from user's server and bare jid (EJAB-1441)
- Pubsub: Add hooks for node creation/deletion (EJAB-1470)
- Shared Rosters: support groupname@vhost in Displayed Groups (EJAB-506)
- Vcard: Fix error when lowercasing some search results (EJAB-1490)
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,58 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.11
-
-  ejabberd 2.1.11 includes a few bugfixes and improvements.
-
-  Read more details about the changes in:
-    http://redir.process-one.net/ejabberd-2.1.11
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  The major changes are:
-
-* HTTP service
- Fix ejabberd_http:get_line
- Don't use binary:match to extract lines from binaries
- Parse and encode https header names like native http parser does
- Parse correctly https request split into multiple packets
- Properly handle HEAD request in mod_http_bind (EJAB-1538)
- New option default_host for handling requests with ambiguous Host (EJAB-1261)
-
-* ODBC
- New ODBC support for mod_announce
- New ODBC support for mod_blocking
- New ODBC support for mod_irc
- New ODBC support for mod_muc
- New ODBC support for mod_shared_roster
- New ODBC support for mod_vcard_xupdate
- Add ODBC exporting function for privacy table
- Work also with some unicode strings in PgSQL (EJAB-1490)
- Replace a single quote with double quotes in an ODBC escape
-
-* SSL
- Make sure that res is initialized in all cases
- Parse correctly https request split into multiple packets (EJAB-1537)
- Added missed tls:recv_data/2
- Don't ignore Length parameter in tls:recv
- Avoid quadratic behavior in reading SSL data
- Dix http_bind webserver TLS fail on Chrome (EJAB-1530)
-
-* Miscelanea
- Assume we have only one CPU when an auto-detection fails (EJAB-1516)
- Auth: Relax digest-uri handling (EJAB-1529)
- Caps: Cache caps timestamp before the IQ-request is done
- IRC: Use of MUC password
- Private: misc errors cases fixes
- Pubsub: return user affiliation for a specified node (EJAB-1294)
- Shared Roster: Foreign items were not pushed (EJAB-1509)
- Shared Roster LDAP: user substitution in ldap_rfilter (EJAB-1555)
- Windows: Fix makefile rules for building DLLs
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,67 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.12
-
-  ejabberd 2.1.12 includes a many bugfixes and a few improvements.
-
-  Read more details about the changes in:
-    http://redir.process-one.net/ejabberd-2.1.12
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  The changes are:
-
-* Core ejabberd
- Make terms serialization faster
- Reduce size of XML stream state
-
-* Administration
- Add SCRAM and remove MD5 support to ejabberd commands auth verification
- Added command to list all the vhosts registered in an ejabberd node
- Added export2odbc command, copied from mod_admin_extra.erl
- Fix ejabberdctl number of arguments error report with R15
- Check node name is available before starting ejabberd (EJAB-1572)
- Fix ejabberd_xmlrpc commands authentication with SCRAM
- Fix mod_offline:store_offline_msg argument (EJAB-1581)
- Log IP address when auth attempt fails
- Make sure update_info returns atoms only (EJAB-1595)
- On shutdown, first stop listeners, then modules
-
-* Encryption
- Detect OpenSSL version at runtime, not at compile time
- Fixed signedness issue in tls_drv GET_DESCRYPTED_INPUT (EJAB-1591)
- Enable DHE key exchange in TLS driver
- Enable ECDHE key exchange in TSL driver
- Disable old and unsecure ciphers in TLS driver
- Disable SSL 2.0 in TLS driver
-
-* HTTP-Bind
- Do not trigger item-not-found errors in mod_http_bind
- Repeated http-bind request should abort only requests with same rid
- Receiving missing request shouldn't close waiting out-ouf-order request
-
-* XMPP
- Allow multiple fqdn values in configuration (EJAB-1578)
- Fix get_subscription_lists/4
- Fix account registration
- Send announce Message stanzas as Headline type instead of Normal
-
-* Other
- Guide: Fix file name of Name Service Switch
- Guide: Document the db_type modules option (EJAB-1560)
- LDAP: Fix broken JPEG photo (EJAB-1526)
- LDAP: Fix compatibility with Erlang R16A (EJAB-1612)
- MUC: Fix angle brackets handle in plaintext log (EJAB-1610)
- MUC: Fix MUC start when Mnesia tables don't exist yet
- MUC: New mod_muc_log option file_permissions (EJAB-1588)
- ODBC: Merge SQL and Mnesia code into one module (EJAB-1560)
- Translation: New Hebrew
- Translation: Update Slovak
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,51 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.2
-
-  ejabberd 2.1.2 is the second bugfix release in ejabberd 2.1.x branch.
-
-  ejabberd 2.1.2 includes several bugfixes.
-  More details of those fixes can be retrieved from:
-     http://redir.process-one.net/ejabberd-2.1.2
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/ejabberd/
-
-
-  The major changes are:
-
-* Core
- Close sessions that were half connected
- Fix SASL PLAIN authentication message for RFC4616 compliance
- Fix support for old Erlang/OTP R10 and R11
- Return proper error (not 'conflict') when register is forbidden by ACL
- When ejabberd stops, send stream close to clients
-
-* ejabberdctl
- Check for EGID in ejabberdctl command
- Command to stop ejabberd informing users, with grace period
- If there's a problem in config file, display config lines and stop node
-
-* MUC
- Kick occupants with reason when room is stopped due to MUC shutdown
- Write in room log when a room is created, destroyed, started, stopped
-
-* PubSub and PEP
- Don't call gen_server on internal event (improves performance and scalability)
- Fix duplicate SHIM header in Pubsub message
- Notification messages of Pubsub node config change contained a SHIM header
- SubID SHIM header missing in Pubsub message with multiple
-  subscriptions on the same node
- PEP: last published item not sent from unavailable users when the
-  subscription is implicit (XEP-0115)
- pep_mapping not working due to Node type mismatch
-
-* WebAdmin
- If big offline message queue, show only subset on WebAdmin
- Support in user list page of WebAdmin when mod_offline is disabled
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,91 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.3
-
-  ejabberd 2.1.3 is the third release in ejabberd 2.1.x branch.
-
-  ejabberd 2.1.3 includes many bugfixes, and some improvements.
-  More details of those fixes can be retrieved from:
-     http://redir.process-one.net/ejabberd-2.1.3
-
-  The new code can be downloaded from ejabberd download page:
-     http://www.process-one.net/en/ejabberd/
-
-
-  This is the full list of changes:
-
-* Client connections
- Avoid 'invalid' value in iq record
- Avoid resending stream:error stanzas on terminate (EJAB-1180)
- Close also legacy sessions that were half connected (EJAB-1165)
- iq_query_info/1 now returns 'invalid' if XMLNS is invalid
- New ejabberd_c2s option support: max_fsm_queue
- Rewrite mnesia counter functions to use dirty_update_counter (EJAB-1177)
- Run user_receive_packet also when sending offline messages (EJAB-1193)
- Use p1_fsm behaviour in c2s FSM (EJAB-1173)
-
-* Clustering
- Fix cluster race condition in route read
- New command to set master Mnesia node
- Use mnesia:async_dirty when cleaning table from failed node
-
-* Documentation
- Add quotes in documentation of some erl arguments (EJAB-1191)
- Add option access_from (EJAB-1187)
- Add option max_fsm_queue (EJAB-1185)
- Fix documentation installation, no need for executable permission (EJAB-1170)
- Fix typo in EJABBERD_BIN_PATH (EJAB-891)
- Fix typos in example config comments (EJAB-1192)
-
-* ejabberdctl
- Support concurrent connections with bound connection names
- Add support for Jot in ctl and TTY in debug
- Support help command names with old - characters
- Fix to really use the variable ERL_PROCESSES
-
-* Erlang compatibility
- Don't call queue:filter/2 to keep compatibility with older Erlang versions
- Use alternative of file:read_line/1 to not require R13B02
-
-* HTTP
- Add new debugging hook to the http receiving process
- Allow a request_handler to serve a file in root of HTTP
-
-* HTTP-Bind (BOSH)
- Cross-domain HTTP-Bind support (EJAB-1168)
- Hibernate http-bind process after handling a request
- Reduce verbosity of HTTP Binding log messages
-
-* LDAP
- Document ldap_dn_filter, fetch only needed attributes in search (EJAB-1204)
- Use "%u" pattern as default for ldap_uids (EJAB-1203)
-
-* Localization
- Fix German translation (EJAB-1195)
- Fix Russian translation
-
-* ODBC
- Fix MSSQL support, which was broken (EJAB-1201)
- Improved SQL reconnect behaviour
-
-* Pubsub, PEP and Caps
- Add extended stanza addressing 'replyto' on PEP (EJAB-1198)
- Add pubsub#purge_offline (EJAB-1186)
- Fix pubsub#title option (EJAB-1190)
- Fix remove_user for node subscriptions (EJAB-1172)
- Optimizations in mod_caps
-
-* Other
- mod_register: Add new acl access_from, default is to deny
- mod_sic: new module for the experimental XEP-0279 Server IP Check (EJAB-1205)
- PIEFXIS: Catch errors when exporting to PIEFXIS file (EJAB-1178)
- Proxy65: new option "hostname" (EJAB-838)
- Roster: Fix resending authorization problem
- Shared Roster Groups: get contacts nickname from vcard (EJAB-114)
- S2S: Improved s2s connections clean up (EJAB-1202)
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,80 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.4
-
-  ejabberd 2.1.4 is the fourth release in ejabberd 2.1.x branch,
-  and includes many small bugfixes and improvements.
-
-  Read more details about the changes in:
-    http://redir.process-one.net/ejabberd-2.1.4
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  This is the full list of changes:
-
-* Authentication
- Extauth: Optionally cache extauth users in mnesia (EJAB-641)
- LDAP: Allow inband password change (EJAB-199)
- LDAP: Extensible match support (EJAB-722)
- LDAP: New option ldap_tls_verify is added (EJAB-1229)
- PAM: New option pam_userinfotype to provide username or JID (EJAB-652)
-
-* HTTP
- Add xml default content type
- Don't show HTTP request in logs, because reveals password (EJAB-1231)
- Move HTTP session timeout log from warning level to info
- New Access rule webadmin_view for read-only
-
-* HTTP-Bind (BOSH)
- Change max inactivity from 30 to 120 seconds
- Export functions to facilitate prebinding methods
- Use dirty_delete when removing the session
- Remove an unneeded delay of 100 milliseconds
-
-* Pubsub, PEP and Caps
- Enforce pubsub#presence_based_delivery (EJAB-1221)
- Enforce pubsub#show_values subscription option (EJAB-1096)
- Fix error code when unsubscribing from a non-existent node
- Fix to send node notifications (EJAB-1225)
- Full support for XEP-0115 v1.5 (EJAB-1223)(EJAB-1189)
- Make last_item_cache feature to be cluster aware
- Prevent orphaned pubsub node (EJAB-1233)
- Send created node notifications
-
-* Other
- Bounce messages when closing c2s session
- Bugfixes when handling Service Discovery to contacts (EJAB-1207)
- Compilation of ejabberd_debug.erl is now optional
- Don't send error stanza as reply to error stanza (EJAB-930)
- Don't store blocked messages in offline queue
- Reduce verbosity of log when captcha_cmd is checked but not configured
- Use a standard method to get a random seed (EJAB-1229)
- Commands: new update_list and update to update modified modules (EJAB-1237)
- Localization: Updated most translations
- MUC: Refactor code to reduce calls to get_affiliation and get_role
- ODBC: Add created_at column also to PostgreSQL schema
- Vcard: Automatic vcard avatar addition in presence
-
-
-   Upgrading From previous ejabberd releases:
-
- If you use PostgreSQL, maybe you want to add the column created_at
-  to several tables. This is only a suggestion; ejabberd doesn't use
-  that column.  Add it to your existing database executing those SQL
-  statements:
-
-ALTER TABLE users ADD COLUMN created_at TIMESTAMP NOT NULL DEFAULT now();
-ALTER TABLE rosterusers ADD COLUMN created_at TIMESTAMP NOT NULL DEFAULT now();
-ALTER TABLE spool ADD COLUMN created_at TIMESTAMP NOT NULL DEFAULT now();
-ALTER TABLE vcard ADD COLUMN created_at TIMESTAMP NOT NULL DEFAULT now();
-ALTER TABLE privacy_list ADD COLUMN created_at TIMESTAMP NOT NULL DEFAULT now();
-ALTER TABLE privacy_storage ADD COLUMN created_at TIMESTAMP NOT NULL DEFAULT now();
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
-
@@ -1,70 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.5
-
-  ejabberd 2.1.5 is the fifth release in ejabberd 2.1.x branch,
-  and includes several minor bugfixes and a few improvements.
-
-  Read more details about the changes in:
-    http://redir.process-one.net/ejabberd-2.1.4
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  This is the full list of changes:
-
-* Authentication
- Extauth: Support parallel script running (EJAB-1280)
- mod_register: Return Registered element when account exists
-
-* ejabberdctl
- Fix print of command result that contains ~
- Fix problem when FIREWALL_WINDOW options for erl kernel were used
- Fix typo in update_list command (EJAB-1237)
- Some systems delete the lock dir; in such case don't use flock at all
- The command Update now returns meaningful message and exit-status (EJAB-1237)
-
-* HTTP-Bind (BOSH)
- Don't say v1.2 in the Bind HTTP page
- New optional BOSH connection attribute process-delay (EJAB-1257)
-
-* MUC
- Document the mod_muc option captcha_protected
- Now admins are able to see private rooms in disco (EJAB-1269)
- Show some more room options in the log file
-
-* ODBC
- Correct handling of SQL boolean types (EJAB-1275)
- Discard too old queued requests (the caller has already got a timeout)
- Fixes wrong SQL escaping when --enable-full-xml is set
- Use ets insead of asking supervisor in ejabberd_odbc_sup:get_pids/1
-
-* Pubsub, PEP and Caps
- Enforce disco features results (EJAB-1033, EJAB-1228, EJAB-1238)
- Support all the hash functions required by Caps XEP-0115
-
-* Requirements
- Fixed support for Erlang R12; which doesn't support: true andalso ok
- Support OTP R14A by using public_key library instead of old ssl (EJAB-953)
- Requirement of OpenSSL increased from 0.9.6 to 0.9.8
- OpenSSL is now required, not optional
-
-* Other
- Don't ask for client certificate when using tls (EJAB-1267)
- Fix typo in --enable-transient_supervisors
- Fix privacy check when serving local Last (EJAB-1271)
- Inform client that SSL session caching is disabled
- New configure option: --enable-nif
- Use driver allocator in C files for reflecting memory in erlang:memory(system)
- Debug: New p1_prof compiled with: make debugtools=true
- Debug: Added functions to collect stats about queues, memory, reductions etc
- HTTP: Log error if request has ambiguous Host header (EJAB-1261)
- Logs: When logging s2s out connection attempt or success, log if TLS is used
- Shared Rosters: When account is deleted, delete also member of stored rosters
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,67 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.6
-
-  ejabberd 2.1.6 is the sixth release in ejabberd 2.1.x branch,
-  and includes a lot of bugfixes and improvements.
-
-  Read more details about the changes in:
-    http://redir.process-one.net/ejabberd-2.1.6
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  Some of the changes are:
-
-* Account register
- mod_register: New ip_access option restricts which IPs can register (EJAB-915)
- mod_register: Default configuration allows registrations only from localhost
- mod_register: New password_strength for entropy check (EJAB-1326)
- mod_register: New captcha_protected option to require CAPTCHA (EJAB-1262)
- mod_register_web: New module, with CAPTCHA support (EJAB-471)
-
-* BOSH
- Don't loop when there is nothing after a stream start (EJAB-1358)
- Fix http-bind supervisor to support multiple vhosts (EJAB-1321)
- Support to restart http-bind (EJAB-1318)
- Support for X-Forwarded-For HTTP header (EJAB-1356)
-
-* Erlang/OTP compatibility
- R11: Fix detection of Erlang R11 and older (EJAB-1287)
- R12B5: Fix compatibility in ejabberd_http_bind.erl (EJAB-1343)
- R14A: Make xml.c correctly compile (EJAB-1288)
- R14A, R14B: Disapprove the use of R14A and R14B due to the rwlock bug
- R14B: Use pg2 from this version in systems with older ones (EJAB-1349)
-
-* Listeners
- Bind listener ports early and start accepting connections later
- Fix a leak of ejabberd_receiver processes
- Speed up ejabberd_s2s:is_service/2, allow_host/2 (EJAB-1319)
- S2S: New option to require encryption (EJAB-495)
- S2S: New option to reject connection if untrusted certificate (EJAB-464)
- S2S: Include From attribute in the stream header of outgoing S2S connections
- S2S: Fix domain_certfile tlsopts modifications for S2S connections (EJAB-1086)
-
-* Pubsub/PEP/Caps
- Fix pubsub cross domain eventing (EJAB-1340)
- Use one_queue IQ discipline by default
- Implement lifetime for broken hashes
- New CAPS processing
-
-* ODBC
- Increase maximum restart strategy to handle some SQL timeouts
- Support PostgreSQL 9.0 (EJAB-1359)
- Use MEDIUMTEXT type for vcard avatars in MySQL schema (EJAB-1252)
-
-* Miscellanea:
- mod_shared_roster_ldap: New Shared Roster Groups using LDAP information
- mod_privacy: Fix to allow block by group and subscription again
- Support timezone West of UTC (EJAB-1301)
- Support to change loglevel per module at runtime (EJAB-225)
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,97 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.7
-
-  ejabberd 2.1.7 is the eighth release in ejabberd 2.1.x branch,
-  and includes a lot of bugfixes and improvements.
-
-  Read more details about the changes in:
-    http://redir.process-one.net/ejabberd-2.1.7
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  The changes are:
-
-* BOSH and Web
- Clarify error message when BOSH query is sent to non-running module
- Keep the order of stanzas when BOSH sends several (EJAB-1374)
- Show configuration for HTTPS http_bind
- Support as read-only HTTP method not only GET, also HEAD
- The responses to HEAD must have empty Body
-
-* CAPTCHA
- If the port number isn't listener, then specify the protocol (EJAB-1418)
- New CAPTCHA limit
- New CAPTCHA whitelist support
- Only check system at startup if option is enabled
- Provide HTTPS URL in CAPTCHA form when listener has 'tls' option (EJAB-1406)
- Show captcha_limit option in the example config
- Support more captcha_host value formats (EJAB-1418)
- Throw error when captcha fails at server start, not later at runtime
- captcha_host must have the port number to get protocol (EJAB-1418)
-
-* Core ejabberd
- Disable all entity expansions (EJAB-1451)
- Do not accept XML with undefined prefixes (EJAB-680)
- Make jlib:ip_to_list safe to use
- Make sure 'closed' event is correctly processed on every state
- New route_iq/5 accepting Timeout (EJAB-1398)
- Take into consideration internal queue length when sorting processes queues
- Use route instead of send_element to go through standard workflow
-
-* Erlang/OTP compatibility
- Remove Type and Spec, backport list comprehensions, so R12B-5 can compile
- Tweak pg2_backport.erl to work with Erlang older than R13A (EJAB-1349)
-
-* ODBC
- Don't let presence-in privacy rule block a presence subscription (EJAB-255)
- Escape user input in mod_privacy_odbc (EJAB-1442)
- Try to improve support for roster_version in MSSQL (EJAB-1437)
-
-* Pubsub/PEP/Caps
- Apply filtered notification to PEP last items (EJAB-1456)
- Fix empty pubsub payload check
- Owner can delete any items from its own node (EJAB-1445)
- Pubsub node maxitem forced to 0 if non persistent node (EJAB-1434)
- Reorganize the push_item function, and handle version not_found (EJAB-1420)
-
-* Scripts
- ejabberd.init: Several fixes and improvements
- ejabberdctl: Escape output from ctlexec() to erl script (EJAB-1399)
- ejabberdctl: Fix bashism and mimic master branch (EJAB-1404)
- ejabberdctl: Fix space between INET_DIST_INTERFACE (EJAB-1416)
- ejabberdctl: New DIST_USE_INTERFACE restricts IP of erlang listen (EJAB-1404)
- ejabberdctl: New ERL_EPMD_ADDRESS that works since Erlang/OTP R14B03
- extauth: Fix delayed response of timeout was reused for next login (EJAB-1385)
- extauth: Forward old messages to newly spawned extauth process (EJAB-1385)
- extauth: If script crashes, ejabberd should restart it (EJAB-1428)
-
-* XEP support
- mod_blocking: New XEP-0191 Simple Communications Blocking (EJAB-695)
- No need to inform that XEP-0237 is optional; clarified in XEP version 1.2
-
-* Miscellanea:
- If a module start fails during server start, stop erlang (EJAB-1446)
- New Indonesian translation (EJAB-1407)
- LDAP: Note that ejabberd works with CGP LDAP server
- S2S: Handle Tigase's unexpected version=1.0 (EJAB-1379)
- mod_irc: Send presence unavailable to the departing occupant (EJAB-1417)
- mod_last: Allow user to query his own Last activity
- mod_muc: Do not decrease MUC admin's role/affiliation
- mod_muc: Send jid attribute when occupant is banned (EJAB-1432)
- mod_offline: Change c2s state before offline messages resending
- mod_ping: Use iqdisc no_queue by default (EJAB-1435)
- mod_pres_counter: Prevent subscription flood (EJAB-1388)
- mod_register Access now also controls account unregistrations
- mod_register: Clarify more the expected content of welcome_message option
- mod_shared_roster: Fix support for anonymous accounts in @all@ (EJAB-1264)
- mod_shared_roster: New @online@ directive (EJAB-1391)
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
-
@@ -1,21 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.8
-
-  ejabberd 2.1.8 is the ninth release in ejabberd 2.1.x branch,
-  and includes a PubSub regression bugfix.
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  The change is:
-
- Fix issue on PubSub preventing publication of items (EJAB-1457)
-
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,56 +0,0 @@
-
-                              Release Notes
-                             ejabberd 2.1.9
-
-  ejabberd 2.1.9 is the eighth release in ejabberd 2.1.x branch,
-  and includes a lot of bugfixes and improvements.
-
-  Read more details about the changes in:
-    http://redir.process-one.net/ejabberd-2.1.9
-
-  Download the source code and installers from:
-    http://www.process-one.net/en/ejabberd/
-
-
-  The changes are:
-
-* Core ejabberd
- Decrease CPU usage caused by tls:send with large data
- Escape iolist correctly when NIFs are disabled (EJAB-1462)
- Fix code to satisfy Dialyzer warnings
- Fix compilation in Windows
- Replace calls of OTP's Binary, since they would require R14
-
-* LDAP
- Document ldap_tls_cacertfile and ldap_tls_depth options (EJAB-1299)
- Log an error when an LDAP filter is incorrect (EJAB-1395)
- New options: ldap_tls_cacertfile and ldap_tls_depth (EJAB-1299)
- New option: ldap_deref_aliases (EJAB-639)
- Match ldap_uidattr_format case-insensitively (EJAB-1449)
-
-* MUC
- Support for multiple entry with same nick to MUC rooms (EJAB-305)
- Support voice request and approvement
- New room option: allow_private_messages_from_visitors
- New room options: allow_voice_requests and voice_request_min_interval
- Include status 110 in presence to new occupant (EJAB-740)
- Fix mod_muc_log crash when first log entry is room destroy (EJAB-1499)
- Many fixes and improvements in mod_muc
-
-* Pubsub
- Enable pubsub#deliver_notification checking (EJAB-1453)
- Fix Denial of Service when user sends malformed publish stanza (EJAB-1498)
-
-* ODBC
- Fix ODBC account counting (EJAB-1491)
- Optimized mod_roster_odbc:get_roster
-
-* Miscellanea:
- New SASL SCRAM-SHA-1 authentication mechanism (EJAB-1196)
- New option: resource_conflict (EJAB-650)
-
-
-  Bug reports
-
-  You can officially report bugs on ProcessOne support site:
-  http://support.process-one.net/
@@ -1,2 +0,0 @@
-% ejabberd version (automatically generated).
-\newcommand{\version}{13.09}
@@ -24,7 +24,7 @@ test -x "$CTL" || {
 	echo "ERROR: ejabberd not found: $DIR"
 	exit 1
 }
-grep ^"$USER": /etc/passwd >/dev/null || {
+getent passwd "$USER" >/dev/null || {
 	echo "ERROR: System user not found: $USER"
 	exit 2
 }
@@ -0,0 +1,17 @@
+[Unit]
+Description=XMPP Server
+After=network.target
+
+[Service]
+User=ejabberd
+Group=ejabberd
+LimitNOFILE=16000
+RestartSec=5
+ExecStart=@ctlscriptpath@/ejabberdctl start
+ExecStop=@ctlscriptpath@/ejabberdctl stop
+ExecReload=@ctlscriptpath@/ejabberdctl reload_config
+Type=oneshot
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
@@ -1,5 +1,5 @@
 ###
-###               ejabberd configuration file
+###'              ejabberd configuration file
 ###
 ###

@@ -24,8 +24,8 @@
 ###   > Art thou not Romeo,
 ###     and a Montague?

-###   =========
-###   DEBUGGING
+###.  =======
+###'  LOGGING

 ##
 ## loglevel: Verbosity of log files generated by ejabberd.
@@ -38,6 +38,32 @@
 ##
 loglevel: 4

+##
+## rotation: Describe how to rotate logs. Either size and/or date can trigger
+## log rotation. Setting count to N keeps N rotated logs. Setting count to 0
+## does not disable rotation, it instead rotates the file and keeps no previous
+## versions around. Setting size to X rotate log when it reaches X bytes.
+## To disable rotation set the size to 0 and the date to ""
+## Date syntax is taken from the syntax newsyslog uses in newsyslog.conf.
+## Some examples:
+##  $D0     rotate every night at midnight
+##  $D23    rotate every day at 23:00 hr
+##  $W0D23  rotate every week on Sunday at 23:00 hr
+##  $W5D16  rotate every week on Friday at 16:00 hr
+##  $M1D0   rotate on the first day of every month at midnight
+##  $M5D6   rotate on every 5th day of the month at 6:00 hr
+##
+log_rotate_size: 10485760
+log_rotate_date: ""
+log_rotate_count: 1
+
+##
+## overload protection: If you want to limit the number of messages per second
+## allowed from error_logger, which is a good idea if you want to avoid a flood
+## of messages when system is overloaded, you can set a limit.
+## 100 is ejabberd's default.
+log_rate_limit: 100
+
 ##
 ## watchdog_admins: Only useful for developers: if an ejabberd process
 ## consumes a lot of memory, send live notifications to these XMPP
@@ -46,9 +72,18 @@ loglevel: 4
 ## watchdog_admins:
 ##   - "bob@example.com"

+###.  ===============
+###'  NODE PARAMETERS

-###   ================
-###   SERVED HOSTNAMES
+##
+## net_ticktime: Specifies net_kernel tick time in seconds. This options must have
+## identical value on all nodes, and in most cases shouldn't be changed at all from
+## default value.
+##
+## net_ticktime: 60
+
+###.  ================
+###'  SERVED HOSTNAMES

 ##
 ## hosts: Domains served by ejabberd.
@@ -68,8 +103,8 @@ hosts:
 ##
 ## route_subdomains: s2s

-###   ===============
-###   LISTENING PORTS
+###.  ===============
+###'  LISTENING PORTS

 ##
 ## listen: The ports ejabberd will listen on, which service each is handled
@@ -82,10 +117,21 @@ listen:
    ##
    ## If TLS is compiled in and you installed a SSL
    ## certificate, specify the full path to the
-    ## file and uncomment this line:
+    ## file and uncomment these lines:
    ##
    ## certfile: "/path/to/ssl.pem"
    ## starttls: true
+    ##
+    ## To enforce TLS encryption for client connections,
+    ## use this instead of the "starttls" option:
+    ##
+    ## starttls_required: true
+    ##
+    ## Custom OpenSSL options
+    ##
+    ## protocol_options:
+    ##   - "no_sslv3"
+    ##   - "no_tlsv1"
    max_stanza_size: 65536
    shaper: c2s_shaper
    access: c2s
@@ -121,17 +167,21 @@ listen:
  ## - 
  ##   port: 4560
  ##   module: ejabberd_xmlrpc
+  ##   access_commands: {}
  - 
    port: 5280
    module: ejabberd_http
-    ## request_handlers:
-    ##   "/pub/archive": mod_http_fileserver
+    request_handlers:
+      "/websocket": ejabberd_http_ws
+    ##  "/pub/archive": mod_http_fileserver
    web_admin: true
-    http_poll: true
    http_bind: true
    ## register: true
    captcha: true

+###.  ==================
+###'  S2S GLOBAL OPTIONS
+
 ##
 ## s2s_use_starttls: Enable STARTTLS + Dialback for S2S connections.
 ## Allowed values are: false optional required required_trusted
@@ -144,6 +194,12 @@ listen:
 ##
 ## s2s_certfile: "/path/to/ssl.pem"

+## Custom OpenSSL options
+##
+## s2s_protocol_options:
+##   - "no_sslv3"
+##   - "no_tlsv1"
+
 ##
 ## domain_certfile: Specify a different certificate for each served hostname.
 ##
@@ -158,7 +214,7 @@ listen:
 ##
 ## Default s2s policy for undefined hosts.
 ##
-## s2s_policy: s2s_access
+## s2s_access: s2s

 ##
 ## Outgoing S2S options
@@ -171,8 +227,8 @@ listen:
 ##   - ipv6
 ## outgoing_s2s_timeout: 10000

-###   ==============
-###   AUTHENTICATION
+###.  ==============
+###'  AUTHENTICATION

 ##
 ## auth_method: Method used to authenticate the users.
@@ -262,8 +318,8 @@ auth_method: internal
 ##       - internal
 ##       - anonymous

-###   ==============
-###   DATABASE SETUP
+###.  ==============
+###'  DATABASE SETUP

 ## ejabberd by default uses the internal Mnesia database,
 ## so you do not necessarily need this section.
@@ -300,6 +356,12 @@ auth_method: internal
 ##
 ## pgsql_users_number_estimate: true

+##
+## SQLite:
+##
+## odbc_type: sqlite
+## odbc_database: "/path/to/database.db"
+
 ##
 ## ODBC compatible or MSSQL server:
 ##
@@ -317,8 +379,8 @@ auth_method: internal
 ##
 ## odbc_keepalive_interval: undefined

-###   ===============
-###   TRAFFIC SHAPERS
+###.  ===============
+###'  TRAFFIC SHAPERS

 shaper:
  ##
@@ -399,8 +461,8 @@ acl:
 ##         user:
 ##           - "bob-local": "localhost"

-###   ============
-###   ACCESS RULES
+###.  ============
+###'  ACCESS RULES
 access:
  ## Maximum number of simultaneous sessions allowed for a single user:
  max_user_sessions: 
@@ -449,7 +511,7 @@ access:
  trusted_network: 
    loopback: allow
  ## Do not establish S2S connections with bad servers
-  ## s2s_access:
+  ## s2s: 
  ##   bad_servers: deny
  ##   all: allow

@@ -469,8 +531,8 @@ access:
 ##       register:
 ##         all: deny

-###   ================
-###   DEFAULT LANGUAGE
+###.  ================
+###'  DEFAULT LANGUAGE

 ##
 ## language: Default language used for server messages.
@@ -484,8 +546,8 @@ language: "en"
 ##   "localhost":
 ##     language: "ru"

-###   =======
-###   CAPTCHA
+###.  =======
+###'  CAPTCHA

 ##
 ## Full path to a script that generates the image.
@@ -502,18 +564,21 @@ language: "en"
 ##
 ## captcha_limit: 5

-###   =======
-###   MODULES
+###.  =======
+###'  MODULES

 ##
 ## Modules enabled in all ejabberd virtual hosts.
 ##
 modules: 
  mod_adhoc: {}
+  ## mod_admin_extra: {}
  mod_announce: # recommends mod_adhoc
    access: announce
  mod_blocking: {} # requires mod_privacy
  mod_caps: {}
+  mod_carboncopy: {}
+  mod_client_state: {}
  mod_configure: {} # requires mod_adhoc
  mod_disco: {}
  ## mod_echo: {}
@@ -530,6 +595,7 @@ modules:
    access_persistent: muc_create
    access_admin: muc_admin
  ## mod_muc_log: {}
+  ## mod_multicast: {}
  mod_offline: 
    access_max_user_messages: max_user_offline_messages
  mod_ping: {}
@@ -550,50 +616,45 @@ modules:
      - "flat"
      - "hometree"
      - "pep" # pep requires mod_caps
-  mod_register: 
+  ## mod_register:
    ##
    ## Protect In-Band account registrations with CAPTCHA.
    ##
-    ## captcha_protected: true
-
+    ##   captcha_protected: true
    ##
    ## Set the minimum informational entropy for passwords.
    ##
-    ## password_strength: 32
-
+    ##   password_strength: 32
    ##
    ## After successful registration, the user receives
    ## a message with this subject and body.
    ##
-    welcome_message: 
-      subject: "Welcome!"
-      body: |-
-        Hi.
-        Welcome to this XMPP server.
-
+    ##   welcome_message:
+    ##     subject: "Welcome!"
+    ##     body: |-
+    ##       Hi.
+    ##       Welcome to this XMPP server.
    ##
    ## When a user registers, send a notification to
    ## these XMPP accounts.
    ##
-    ## registration_watchers:
-    ##   - "admin1@example.org"
-
+    ##   registration_watchers:
+    ##     - "admin1@example.org"
    ##
    ## Only clients in the server machine can register accounts
    ##
-    ip_access: trusted_network
-
+    ##   ip_access: trusted_network
    ##
    ## Local c2s or remote s2s users cannot register accounts
    ##
-    ## access_from: deny
-
-    access: register
+    ##   access_from: deny
+    ##   access: register
  mod_roster: {}
  mod_shared_roster: {}
  mod_stats: {}
  mod_time: {}
-  mod_vcard: {}
+  mod_vcard:
+    search: false
  mod_version: {}

 ##
@@ -601,12 +662,21 @@ modules:
 ##
 ## host_config:
 ##   "localhost":
-##     add:
-##       modules:
-##         mod_echo:
-##           host: "mirror.localhost"
+##     modules:
+##       mod_echo:
+##         host: "mirror.localhost"

+##
+## Enable modules management via ejabberdctl for installation and
+## uninstallation of public/private contributed modules
+## (enabled by default)
+##
+
+allow_contrib_modules: true
+
+###.
+###'
 ### Local Variables:
 ### mode: yaml
 ### End:
-### vim: set filetype=yaml tabstop=8
+### vim: set filetype=yaml tabstop=8 foldmarker=###',###. foldmethod=marker:
@@ -56,7 +56,7 @@
 # This communication is used by ejabberdctl command line tool,
 # and in a cluster of several ejabberd nodes.
 #
-# Default: 127.0.0.1
+# Default: 0.0.0.0
 #
 #INET_DIST_INTERFACE=127.0.0.1

@@ -148,6 +148,39 @@
 #
 #EJABBERD_PID_PATH=/var/run/ejabberd/ejabberd.pid

+#.
+#' EJABBERD_CONFIG_PATH: ejabberd configuration file
+#
+# Specify the full path to the ejabberd configuration file. If the file name has
+# yml or yaml extension, it is parsed as a YAML file; otherwise, Erlang syntax is
+# expected.
+#
+# Default: $ETC_DIR/ejabberd.yml
+#
+#EJABBERD_CONFIG_PATH=/etc/ejabberd/ejabberd.yml
+
+#.
+#' CONTRIB_MODULES_PATH: contributed ejabberd modules path
+#
+# Specify the full path to the contributed ejabberd modules. If the path is not
+# defined, ejabberd will use ~/.ejabberd-modules in home of user running ejabberd.
+#
+# Default: $HOME/.ejabberd-modules
+#
+#CONTRIB_MODULES_PATH=/opt/ejabberd-modules
+
+#.
+#' CONTRIB_MODULES_CONF_DIR: configuration directory for contributed modules
+#
+# Specify the full path to the configuration directory for contributed ejabberd
+# modules. In order to configure a module named mod_foo, a mod_foo.yml file can
+# be created in this directory. This file will then be used instead of the
+# default configuration file provided with the module.
+#
+# Default: $CONTRIB_MODULES_PATH/conf
+#
+#CONTRIB_MODULES_CONF_DIR=/etc/ejabberd/modules
+
 #.
 #'
 # vim: foldmarker=#',#. foldmethod=marker:
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash

 # define default configuration
 POLL=true
@@ -7,71 +7,76 @@ ERL_MAX_PORTS=32000
 ERL_PROCESSES=250000
 ERL_MAX_ETS_TABLES=1400
 FIREWALL_WINDOW=""
-INET_DIST_INTERFACE="127.0.0.1"
 ERLANG_NODE=ejabberd@localhost

 # define default environment variables
 SCRIPT_DIR=`cd ${0%/*} && pwd`
 ERL={{erl}}
+IEX={{bindir}}/iex
+EPMD={{bindir}}/epmd
 INSTALLUSER={{installuser}}
-
-# Compatibility in ZSH
-#setopt shwordsplit 2>/dev/null
+ERL_LIBS={{libdir}}

 # check the proper system user is used if defined
 if [ "$INSTALLUSER" != "" ] ; then
    EXEC_CMD="false"
    for GID in `id -G`; do
        if [ $GID -eq 0 ] ; then
-            EXEC_CMD="su $INSTALLUSER -p -c"
+            INSTALLUSER_HOME=$(getent passwd "$INSTALLUSER" | cut -d: -f6)
+            if [ -n "$INSTALLUSER_HOME" ] && [ ! -d "$INSTALLUSER_HOME" ] ; then
+                mkdir -p "$INSTALLUSER_HOME"
+                chown "$INSTALLUSER" "$INSTALLUSER_HOME"
+            fi
+            EXEC_CMD="su $INSTALLUSER -c"
        fi
    done
    if [ `id -g` -eq `id -g $INSTALLUSER` ] ; then
-        EXEC_CMD="sh -c"
+        EXEC_CMD="bash -c"
    fi
    if [ "$EXEC_CMD" = "false" ] ; then
        echo "This command can only be run by root or the user $INSTALLUSER" >&2
        exit 4
    fi
 else
-    EXEC_CMD="sh -c"
+    EXEC_CMD="bash -c"
 fi

 # parse command line parameters
-ARGS=""
+declare -a ARGS=()
 while [ $# -ne 0 ] ; do
-    PARAM=$1
+    PARAM="$1"
    shift
    case $PARAM in
        --) break ;;
+        --no-timeout) EJABBERD_NO_TIMEOUT="--no-timeout" ;;
        --node) ERLANG_NODE_ARG=$1 ; shift ;;
-        --config-dir) ETCDIR=$1 ; shift ;;
-        --config) EJABBERD_CONFIG_PATH=$1 ; shift ;;
-        --ctl-config) EJABBERDCTL_CONFIG_PATH=$1 ; shift ;;
-        --logs) LOGS_DIR=$1 ; shift ;;
-        --spool) SPOOLDIR=$1 ; shift ;;
-        *) ARGS="$ARGS $PARAM" ;;
+        --config-dir) ETC_DIR="$1" ; shift ;;
+        --config) EJABBERD_CONFIG_PATH="$1" ; shift ;;
+        --ctl-config) EJABBERDCTL_CONFIG_PATH="$1" ; shift ;;
+        --logs) LOGS_DIR="$1" ; shift ;;
+        --spool) SPOOL_DIR="$1" ; shift ;;
+        *) ARGS=("${ARGS[@]}" "$PARAM") ;;
    esac
 done

 # Define ejabberd variable if they have not been defined from the command line
-if [ "$ETCDIR" = "" ] ; then
-    ETCDIR={{sysconfdir}}/ejabberd
+if [ "$ETC_DIR" = "" ] ; then
+    ETC_DIR={{sysconfdir}}/ejabberd
 fi
 if [ "$EJABBERDCTL_CONFIG_PATH" = "" ] ; then
-    EJABBERDCTL_CONFIG_PATH=$ETCDIR/ejabberdctl.cfg
+    EJABBERDCTL_CONFIG_PATH=$ETC_DIR/ejabberdctl.cfg
 fi
 if [ -f "$EJABBERDCTL_CONFIG_PATH" ] ; then
    . "$EJABBERDCTL_CONFIG_PATH"
 fi
 if [ "$EJABBERD_CONFIG_PATH" = "" ] ; then
-    EJABBERD_CONFIG_PATH=$ETCDIR/ejabberd.yml
+    EJABBERD_CONFIG_PATH=$ETC_DIR/ejabberd.yml
 fi
 if [ "$LOGS_DIR" = "" ] ; then
    LOGS_DIR={{localstatedir}}/log/ejabberd
 fi
-if [ "$SPOOLDIR" = "" ] ; then
-    SPOOLDIR={{localstatedir}}/lib/ejabberd
+if [ "$SPOOL_DIR" = "" ] ; then
+    SPOOL_DIR={{localstatedir}}/lib/ejabberd
 fi
 if [ "$EJABBERD_DOC_PATH" = "" ] ; then
    EJABBERD_DOC_PATH={{docdir}}
@@ -84,29 +89,20 @@ if [ "{{release}}" != "true" ] ; then
    if [ "$EJABBERDDIR" = "" ] ; then
        EJABBERDDIR={{libdir}}/ejabberd
    fi
-    if [ "$EJABBERD_EBIN_PATH" = "" ] ; then
-        EJABBERD_EBIN_PATH=$EJABBERDDIR/ebin
-    fi
    if [ "$EJABBERD_PRIV_PATH" = "" ] ; then
        EJABBERD_PRIV_PATH=$EJABBERDDIR/priv
    fi
    if [ "$EJABBERD_BIN_PATH" = "" ] ; then
        EJABBERD_BIN_PATH=$EJABBERD_PRIV_PATH/bin
    fi
-    if [ "$EJABBERD_SO_PATH" = "" ] ; then
-        EJABBERD_SO_PATH=$EJABBERD_PRIV_PATH/lib
-    fi
-    if [ "$EJABBERD_MSGS_PATH" = "" ] ; then
-        EJABBERD_MSGS_PATH=$EJABBERD_PRIV_PATH/msgs
-    fi
 fi
 EJABBERD_LOG_PATH=$LOGS_DIR/ejabberd.log
-SASL_LOG_PATH=$LOGS_DIR/erlang.log
 DATETIME=`date "+%Y%m%d-%H%M%S"`
 ERL_CRASH_DUMP=$LOGS_DIR/erl_crash_$DATETIME.dump
-ERL_INETRC=$ETCDIR/inetrc
-HOME=$SPOOLDIR
+ERL_INETRC=$ETC_DIR/inetrc

+# define mnesia options
+MNESIA_OPTS="-mnesia dir \"\\\"$SPOOL_DIR\\\"\" $MNESIA_OPTIONS"
 # define erl parameters
 ERLANG_OPTS="+K $POLL -smp $SMP +P $ERL_PROCESSES $ERL_OPTIONS"
 KERNEL_OPTS=""
@@ -125,18 +121,32 @@ if [ "$ERLANG_NODE" = "${ERLANG_NODE%.*}" ] ; then
 else
    NAME="-name"
 fi
+IEXNAME="-$NAME"

-# create the ejabberd home dir with the proper user if doesn't exist
-# then change to that directory readable by INSTALLUSER to
-# prevent "File operation error: eacces." messages
-[ -d $HOME ] || $EXEC_CMD "mkdir -p $HOME"
-cd $HOME
+# define ejabberd environment parameters
+if [ "$EJABBERD_CONFIG_PATH" != "${EJABBERD_CONFIG_PATH%.yml}" ] ; then
+    rate=$(sed '/^[ 	]*log_rate_limit/!d;s/.*://;s/ *//' $EJABBERD_CONFIG_PATH)
+    rotate=$(sed '/^[ 	]*log_rotate_size/!d;s/.*://;s/ *//' $EJABBERD_CONFIG_PATH)
+    count=$(sed '/^[ 	]*log_rotate_count/!d;s/.*://;s/ *//' $EJABBERD_CONFIG_PATH)
+    date=$(sed '/^[ 	]*log_rotate_date/!d;s/.*://;s/ *//' $EJABBERD_CONFIG_PATH)
+else
+    rate=$(sed '/^[ 	]*log_rate_limit/!d;s/.*,//;s/ *//;s/}\.//' $EJABBERD_CONFIG_PATH)
+    rotate=$(sed '/^[ 	]*log_rotate_size/!d;s/.*,//;s/ *//;s/}\.//' $EJABBERD_CONFIG_PATH)
+    count=$(sed '/^[ 	]*log_rotate_count/!d;s/.*,//;s/ *//;s/}\.//' $EJABBERD_CONFIG_PATH)
+    date=$(sed '/^[ 	]*log_rotate_date/!d;s/.*,//;s/ *//;s/}\.//' $EJABBERD_CONFIG_PATH)
+fi
+[ -z "$rate" ] || EJABBERD_OPTS="log_rate_limit $rate"
+[ -z "$rotate" ] || EJABBERD_OPTS="${EJABBERD_OPTS} log_rotate_size $rotate"
+[ -z "$count" ] || EJABBERD_OPTS="${EJABBERD_OPTS} log_rotate_count $count"
+[ -z "$date" ] || EJABBERD_OPTS="${EJABBERD_OPTS} log_rotate_date '$date'"
+[ -z "$EJABBERD_OPTS" ] || EJABBERD_OPTS="-ejabberd ${EJABBERD_OPTS}"
+
+[ -d $SPOOL_DIR ] || $EXEC_CMD "mkdir -p $SPOOL_DIR"
+cd $SPOOL_DIR

 # export global variables
 export EJABBERD_CONFIG_PATH
-export EJABBERD_MSGS_PATH
 export EJABBERD_LOG_PATH
-export EJABBERD_SO_PATH
 export EJABBERD_BIN_PATH
 export EJABBERD_DOC_PATH
 export EJABBERD_PID_PATH
@@ -145,109 +155,211 @@ export ERL_EPMD_ADDRESS
 export ERL_INETRC
 export ERL_MAX_PORTS
 export ERL_MAX_ETS_TABLES
-export HOME
-export EXEC_CMD
+export CONTRIB_MODULES_PATH
+export CONTRIB_MODULES_CONF_DIR
+export ERL_LIBS
+
+shell_escape_str()
+{
+    if test $# -eq 0; then
+        printf '"" '
+    else
+        shell_escape "$@"
+    fi
+}
+
+shell_escape()
+{
+    local RES=()
+    for i in "$@"; do
+        if test -z "$i"; then
+            printf '"" '
+        else
+            printf '%q ' "$i"
+        fi
+    done
+}

 # start server
 start()
 {
    check_start
-    $EXEC_CMD "$ERL \
-      $NAME $ERLANG_NODE \
-      -noinput -detached \
-      -pa $EJABBERD_EBIN_PATH \
-      -mnesia dir \"\\\"$SPOOLDIR\\\"\" \
-      $KERNEL_OPTS \
-      -s ejabberd \
-      -sasl sasl_error_logger \\{file,\\\"$SASL_LOG_PATH\\\"\\} \
-      $ERLANG_OPTS $ARGS \"$@\""
+    CMD="`shell_escape \"$ERL\" \"$NAME\" \"$ERLANG_NODE\"` \
+         -noinput -detached \
+         $MNESIA_OPTS \
+         $KERNEL_OPTS \
+         $EJABBERD_OPTS \
+         -s ejabberd \
+         $ERLANG_OPTS \
+         `shell_escape \"${ARGS[@]}\" \"$@\"`"
+    $EXEC_CMD "$CMD"
 }

 # attach to server
 debug()
 {
-    echo "--------------------------------------------------------------------"
-    echo ""
-    echo "IMPORTANT: we will attempt to attach an INTERACTIVE shell"
-    echo "to an already running ejabberd node."
-    echo "If an ERROR is printed, it means the connection was not successful."
-    echo "You can interact with the ejabberd node if you know how to use it."
-    echo "Please be extremely cautious with your actions,"
-    echo "and exit immediately if you are not completely sure."
-    echo ""
-    echo "To detach this shell from ejabberd, press:"
-    echo "  control+c, control+c"
-    echo ""
-    echo "--------------------------------------------------------------------"
-    echo "To bypass permanently this warning, add to ejabberdctl.cfg the line:"
-    echo "  EJABBERD_BYPASS_WARNINGS=true"
-    echo "Press any key to continue"
-    if [ "$EJABBERD_BYPASS_WARNINGS" != "true" ] ; then
-        read foo
-    fi
-    echo ""
+    debugwarning
    TTY=`tty | sed -e  's/.*\///g'`
-    $EXEC_CMD "$ERL \
-      $NAME debug-${TTY}-${ERLANG_NODE} \
-      -remsh $ERLANG_NODE \
-      -hidden \
-      $KERNEL_OPTS \
-      $ERLANG_OPTS $ARGS \"$@\""
+    CMD="`shell_escape \"$ERL\" \"$NAME\" \"debug-${TTY}-${ERLANG_NODE}\"` \
+         -remsh $ERLANG_NODE \
+         -hidden \
+         $KERNEL_OPTS \
+         $ERLANG_OPTS \
+         `shell_escape \"${ARGS[@]}\" \"$@\"`"
+    $EXEC_CMD "$CMD"
+}
+
+# attach to server using Elixir
+iexdebug()
+{
+    debugwarning
+    TTY=`tty | sed -e  's/.*\///g'`
+    # Elixir shell is hidden as default
+    CMD="`shell_escape \"$IEX\" \"$IEXNAME\" \"debug-${TTY}-${ERLANG_NODE}\"` \
+         -remsh $ERLANG_NODE \
+         --erl `shell_escape \"$KERNEL_OPTS\"` \
+         --erl `shell_escape \"$ERLANG_OPTS\"` \
+         --erl `shell_escape \"${ARGS[@]}\"` \
+         --erl `shell_escape_str \"$@\"`"
+    $EXEC_CMD "$CMD"
 }

 # start interactive server
 live()
+{
+    livewarning
+    CMD="`shell_escape \"$ERL\" \"$NAME\" \"${ERLANG_NODE}\"` \
+         $MNESIA_OPTS \
+         $KERNEL_OPTS \
+         $EJABBERD_OPTS \
+         -s ejabberd \
+         $ERLANG_OPTS \
+         `shell_escape \"${ARGS[@]}\" \"$@\"`"
+    $EXEC_CMD "$CMD"
+}
+
+# start interactive server with Elixir
+iexlive()
+{
+    livewarning
+    echo $@
+    CMD="`shell_escape \"$IEX\" \"$IEXNAME\" \"${ERLANG_NODE}\"` \
+         --erl \"-mnesia dir \\\"$SPOOL_DIR\\\"\" \
+         --erl \"`shell_escape \"$KERNEL_OPTS\"`\" \
+         --erl \"`shell_escape \"$EJABBERD_OPTS\"`\" \
+         --app ejabberd \
+         --erl `shell_escape \"$ERLANG_OPTS\"` \
+         --erl `shell_escape \"${ARGS[@]}\"` \
+         --erl `shell_escape_str \"$@\"`"
+    $EXEC_CMD "$CMD"
+}
+
+# start server in the foreground
+foreground()
 {
    check_start
-    echo "--------------------------------------------------------------------"
-    echo ""
-    echo "IMPORTANT: ejabberd is going to start in LIVE (interactive) mode."
-    echo "All log messages will be shown in the command shell."
-    echo "You can interact with the ejabberd node if you know how to use it."
-    echo "Please be extremely cautious with your actions,"
-    echo "and exit immediately if you are not completely sure."
-    echo ""
-    echo "To exit this LIVE mode and stop ejabberd, press:"
-    echo "  q().  and press the Enter key"
-    echo ""
-    echo "--------------------------------------------------------------------"
-    echo "To bypass permanently this warning, add to ejabberdctl.cfg the line:"
-    echo "  EJABBERD_BYPASS_WARNINGS=true"
-    echo "Press any key to continue"
+    CMD="`shell_escape \"$ERL\" \"$NAME\" \"$ERLANG_NODE\"` \
+         -noinput \
+         $MNESIA_OPTS \
+         $KERNEL_OPTS \
+         $EJABBERD_OPTS \
+         -s ejabberd \
+         $ERLANG_OPTS \
+         `shell_escape \"${ARGS[@]}\" \"$@\"`"
+    $EXEC_CMD "$CMD"
+}
+
+debugwarning()
+{
    if [ "$EJABBERD_BYPASS_WARNINGS" != "true" ] ; then
+        echo "--------------------------------------------------------------------"
+        echo ""
+        echo "IMPORTANT: we will attempt to attach an INTERACTIVE shell"
+        echo "to an already running ejabberd node."
+        echo "If an ERROR is printed, it means the connection was not successful."
+        echo "You can interact with the ejabberd node if you know how to use it."
+        echo "Please be extremely cautious with your actions,"
+        echo "and exit immediately if you are not completely sure."
+        echo ""
+        echo "To detach this shell from ejabberd, press:"
+        echo "  control+c, control+c"
+        echo ""
+        echo "--------------------------------------------------------------------"
+        echo "To bypass permanently this warning, add to ejabberdctl.cfg the line:"
+        echo "  EJABBERD_BYPASS_WARNINGS=true"
+        echo "Press return to continue"
        read foo
+        echo ""
+    fi
+}
+
+livewarning()
+{
+    check_start
+    if [ "$EJABBERD_BYPASS_WARNINGS" != "true" ] ; then
+        echo "--------------------------------------------------------------------"
+        echo ""
+        echo "IMPORTANT: ejabberd is going to start in LIVE (interactive) mode."
+        echo "All log messages will be shown in the command shell."
+        echo "You can interact with the ejabberd node if you know how to use it."
+        echo "Please be extremely cautious with your actions,"
+        echo "and exit immediately if you are not completely sure."
+        echo ""
+        echo "To exit this LIVE mode and stop ejabberd, press:"
+        echo "  q().  and press the Enter key"
+        echo ""
+        echo "--------------------------------------------------------------------"
+        echo "To bypass permanently this warning, add to ejabberdctl.cfg the line:"
+        echo "  EJABBERD_BYPASS_WARNINGS=true"
+        echo "Press return to continue"
+        read foo
+        echo ""
    fi
-    echo ""
-    $EXEC_CMD "$ERL \
-      $NAME $ERLANG_NODE \
-      -pa $EJABBERD_EBIN_PATH \
-      -mnesia dir \"\\\"$SPOOLDIR\\\"\" \
-      $KERNEL_OPTS \
-      -s ejabberd \
-      $ERLANG_OPTS $ARGS \"$@\""
 }

 etop()
 {
+    TTY=`tty | sed -e  's/.*\///g'`
    $EXEC_CMD "$ERL \
      $NAME debug-${TTY}-${ERLANG_NODE} \
      -hidden -s etop -s erlang halt -output text -node $ERLANG_NODE"
 }

+ping()
+{
+    TTY=`tty | sed -e  's/.*\///g'`
+    if [ "$1" = "${1%.*}" ] ; then
+        PING_NAME="-sname"
+        PING_NODE=$(hostname -s)
+    else
+        PING_NAME="-name"
+        PING_NODE=$(hostname)
+    fi
+    $EXEC_CMD "$ERL \
+      $PING_NAME ping-${TTY}@${PING_NODE} \
+      -hidden \
+      $KERNEL_OPTS $ERLANG_OPTS \
+      -eval 'io:format(\"~p~n\",[net_adm:ping('\"'\"'$1'\"'\"')])' \
+      -s erlang halt -output text -noinput"
+}
+
 help()
 {
    echo ""
    echo "Commands to start an ejabberd node:"
-    echo "  start  Start an ejabberd node in server mode"
-    echo "  debug  Attach an interactive Erlang shell to a running ejabberd node"
-    echo "  live   Start an ejabberd node in live (interactive) mode"
+    echo "  start      Start an ejabberd node in server mode"
+    echo "  debug      Attach an interactive Erlang shell to a running ejabberd node"
+    echo "  iexdebug   Attach an interactive Elixir shell to a running ejabberd node"
+    echo "  live       Start an ejabberd node in live (interactive) mode"
+    echo "  iexlive    Start an ejabberd node in live (interactive) mode, within an Elixir shell"
+    echo "  foreground Start an ejabberd node in server mode (attached)"
    echo ""
    echo "Optional parameters when starting an ejabberd node:"
-    echo "  --config-dir dir   Config ejabberd:    $ETCDIR"
+    echo "  --config-dir dir   Config ejabberd:    $ETC_DIR"
    echo "  --config file      Config ejabberd:    $EJABBERD_CONFIG_PATH"
    echo "  --ctl-config file  Config ejabberdctl: $EJABBERDCTL_CONFIG_PATH"
    echo "  --logs dir         Directory for logs: $LOGS_DIR"
-    echo "  --spool dir        Database spool dir: $SPOOLDIR"
+    echo "  --spool dir        Database spool dir: $SPOOL_DIR"
    echo "  --node nodename    ejabberd node name: $ERLANG_NODE"
    echo ""
 }
@@ -255,26 +367,24 @@ help()
 # common control function
 ctl()
 {
-    COMMAND=$@
-
    # Control number of connections identifiers
    # using flock if available. Expects a linux-style
    # flock that can lock a file descriptor.
    MAXCONNID=100
    CONNLOCKDIR={{localstatedir}}/lock/ejabberdctl
-    FLOCK='/usr/bin/flock'
+    FLOCK=/usr/bin/flock
    if [ ! -x "$FLOCK" ] || [ ! -d "$CONNLOCKDIR" ] ; then
-        JOT='/usr/bin/jot'
+        JOT=/usr/bin/jot
        if [ ! -x "$JOT" ] ; then
            # no flock or jot, simply invoke ctlexec()
            CTL_CONN="ctl-${ERLANG_NODE}"
-            ctlexec $CTL_CONN $COMMAND
+            ctlexec $CTL_CONN "$@"
            result=$?
        else
            # no flock, but at least there is jot
            RAND=`jot -r 1 0 $MAXCONNID`
            CTL_CONN="ctl-${RAND}-${ERLANG_NODE}"
-            ctlexec $CTL_CONN $COMMAND
+            ctlexec $CTL_CONN "$@"
            result=$?
        fi
    else
@@ -284,12 +394,12 @@ ctl()
        # concurrent invocations using a bound
        # number of atoms
        for N in `seq 1 $MAXCONNID`; do
-            CTL_CONN="ejabberdctl-$N"
+            CTL_CONN="ctl-$N-${ERLANG_NODE}"
            CTL_LOCKFILE="$CONNLOCKDIR/$CTL_CONN"
            (
                exec 8>"$CTL_LOCKFILE"
                if flock --nb 8; then
-                    ctlexec $CTL_CONN $COMMAND
+                    ctlexec $CTL_CONN "$@"
                    ssresult=$?
                    # segregate from possible flock exit(1)
                    ssresult=`expr $ssresult \* 10`
@@ -331,26 +441,23 @@ ctl()
 ctlexec()
 {
    CONN_NAME=$1; shift
-    COMMAND=$@
-    $EXEC_CMD "$ERL \
-      $NAME ${CONN_NAME} \
-      -noinput \
-      -hidden \
-      -pa $EJABBERD_EBIN_PATH \
-      $KERNEL_OPTS \
-      -s ejabberd_ctl -extra $ERLANG_NODE $COMMAND"
+    CMD="`shell_escape \"$ERL\" \"$NAME\" \"$CONN_NAME\"` \
+         -noinput -hidden $KERNEL_OPTS -s ejabberd_ctl \
+         -extra `shell_escape \"$ERLANG_NODE\"` $EJABBERD_NO_TIMEOUT \
+         `shell_escape \"$@\"`"
+    $EXEC_CMD "$CMD"
 }

 # stop epmd if there is no other running node
 stop_epmd()
 {
-    epmd -names 2>/dev/null | grep -q name || epmd -kill >/dev/null
+    $EPMD -names 2>/dev/null | grep -q name || $EPMD -kill >/dev/null
 }

 # make sure node not already running and node name unregistered
 check_start()
 {
-    epmd -names 2>/dev/null | grep -q " ${ERLANG_NODE%@*} " && {
+    $EPMD -names 2>/dev/null | grep -q " ${ERLANG_NODE%@*} " && {
        ps ux | grep -v grep | grep -q " $ERLANG_NODE " && {
            echo "ERROR: The ejabberd node '$ERLANG_NODE' is already running."
            exit 4
@@ -361,7 +468,7 @@ check_start()
                echo "Shutdown all other erlang nodes, and call 'epmd -kill'."
                exit 5
            } || {
-                epmd -kill >/dev/null
+                $EPMD -kill >/dev/null
            }
        }
    }
@@ -388,12 +495,16 @@ wait_for_status()
 }

 # main handler
-case $ARGS in
-    ' start') start;;
-    ' debug') debug;;
-    ' live') live;;
-    ' etop') etop;;
-    ' started') wait_for_status 0 30 2;; # wait 30x2s before timeout
-    ' stopped') wait_for_status 3 15 2 && stop_epmd;; # wait 15x2s before timeout
-    *) ctl $ARGS;;
+case "${ARGS[0]}" in
+    'start') start;;
+    'debug') debug;;
+    'iexdebug') iexdebug;;
+    'live') live;;
+    'iexlive') iexlive;;
+    'foreground') foreground;;
+    'ping'*) ping ${ARGS# ping};;
+    'etop') etop;;
+    'started') wait_for_status 0 30 2;; # wait 30x2s before timeout
+    'stopped') wait_for_status 3 15 2 && stop_epmd;; # wait 15x2s before timeout
+    *) ctl "${ARGS[@]}";;
 esac
@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,15 +12,15 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

-%% This macro returns a string of the ejabberd version running, e.g. "2.3.4"
-%% If the ejabberd application description isn't loaded, returns atom: undefined
+-ifndef(EJABBERD_HRL).
+-define(EJABBERD_HRL, true).
+
 -define(VERSION, ejabberd_config:get_version()).

 -define(MYHOSTS, ejabberd_config:get_myhosts()).
@@ -31,6 +31,8 @@

 -define(MSGS_DIR, filename:join(["priv", "msgs"])).

+-define(SQL_DIR, filename:join(["priv", "sql"])).
+
 -define(CONFIG_PATH, <<"ejabberd.cfg">>).

 -define(LOG_PATH, <<"ejabberd.log">>).
@@ -50,3 +52,21 @@
 -type scram() :: #scram{}.

 -define(SCRAM_DEFAULT_ITERATION_COUNT, 4096).
+
+-ifdef(ERL_DEPRECATED_TYPES).
+
+-define(TDICT, dict()).
+-define(TGB_TREE, gb_tree()).
+-define(TGB_SET, gb_set()).
+-define(TQUEUE, queue()).
+
+-else.
+
+-define(TDICT, dict:dict()).
+-define(TGB_TREE, gb_trees:tree()).
+-define(TGB_SET, gb_set:set()).
+-define(TQUEUE, queue:queue()).
+
+-endif.
+
+-endif.
@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -35,7 +34,12 @@
 	 module                  :: atom(),
         function                :: atom(),
         args = []               :: [aterm()] | '_' | '$1' | '$2',
-         result = {res, rescode} :: rterm() | '_' | '$2'}).
+         policy = restricted     :: open | restricted | admin | user,
+         result = {res, rescode} :: rterm() | '_' | '$2',
+         args_desc = none        :: none | [string()] | '_',
+         result_desc = none      :: none | string() | '_',
+         args_example = none     :: none | [any()] | '_',
+         result_example = none   :: any()}).

 -type ejabberd_commands() :: #ejabberd_commands{name :: atom(),
                                                tags :: [atom()],
@@ -72,4 +76,3 @@

 %% @type rterm() = {Name::atom(), Type::rtype()}.
 %% A result term is a tuple with the term name and the term type.
-
@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,15 +12,14 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

 -record(request,
-	{method, %            :: method(),
+	{method            :: method(),
 	 path = []         :: [binary()],
 	 q = []            :: [{binary() | nokey, binary()}],
 	 us = {<<>>, <<>>} :: {binary(), binary()},
@@ -31,6 +30,23 @@
 	 ip                :: {inet:ip_address(), inet:port_number()},
 	 host = <<"">>     :: binary(),
 	 port = 5280       :: inet:port_number(),
-	 tp = http, %         :: protocol(),
+	 opts = []         :: list(),
+	 tp = http         :: protocol(),
 	 headers = []      :: [{atom() | binary(), binary()}]}).

+-record(ws,
+	{socket                  :: inet:socket() | fast_tls:tls_socket(),
+	 sockmod = gen_tcp       :: gen_tcp | fast_tls,
+	 ip                      :: {inet:ip_address(), inet:port_number()},
+	 host = <<"">>           :: binary(),
+	 port = 5280             :: inet:port_number(),
+	 path = []               :: [binary()],
+	 headers = []            :: [{atom() | binary(), binary()}],
+	 local_path = []         :: [binary()],
+	 q = []                  :: [{binary() | nokey, binary()}],
+	 buf                     :: binary(),
+         http_opts = []          :: list()}).
+
+-type method() :: 'GET' | 'HEAD' | 'DELETE' | 'OPTIONS' | 'PUT' | 'POST' | 'TRACE'.
+-type protocol() :: http | https.
+-type http_request() :: #request{}.
@@ -0,0 +1,12 @@
+-ifndef(EJABBERD_SM_HRL).
+-define(EJABBERD_SM_HRL, true).
+
+-record(session, {sid, usr, us, priority, info}).
+-record(session_counter, {vhost, count}).
+-type sid() :: {erlang:timestamp(), pid()}.
+-type ip() :: {inet:ip_address(), inet:port_number()} | undefined.
+-type info() :: [{conn, atom()} | {ip, ip()} | {node, atom()}
+                 | {oor, boolean()} | {auth_module, atom()}].
+-type prio() :: undefined | integer().
+
+-endif.
@@ -0,0 +1,33 @@
+%%%----------------------------------------------------------------------
+%%%
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
+%%%
+%%% This program is free software; you can redistribute it and/or
+%%% modify it under the terms of the GNU General Public License as
+%%% published by the Free Software Foundation; either version 2 of the
+%%% License, or (at your option) any later version.
+%%%
+%%% This program is distributed in the hope that it will be useful,
+%%% but WITHOUT ANY WARRANTY; without even the implied warranty of
+%%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+%%% General Public License for more details.
+%%%
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+%%%
+%%%----------------------------------------------------------------------
+
+-define(SQL_MARK, sql__mark_).
+-define(SQL(SQL), ?SQL_MARK(SQL)).
+
+-define(SQL_UPSERT_MARK, sql_upsert__mark_).
+-define(SQL_UPSERT(Host, Table, Fields),
+        ejabberd_odbc:sql_query(Host, ?SQL_UPSERT_MARK(Table, Fields))).
+-define(SQL_UPSERT_T(Table, Fields),
+        ejabberd_odbc:sql_query_t(?SQL_UPSERT_MARK(Table, Fields))).
+
+-record(sql_query, {hash, format_query, format_res, args, loc}).
+
+-record(sql_escape, {string, integer, boolean}).
+
@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -39,9 +38,12 @@
 -define(AC_MAX_AGE,
 	{<<"Access-Control-Max-Age">>, <<"86400">>}).

+-define(NO_CACHE,
+        {<<"Cache-Control">>, <<"max-age=0, no-cache, no-store">>}).
+
 -define(OPTIONS_HEADER,
 	[?CT_PLAIN, ?AC_ALLOW_ORIGIN, ?AC_ALLOW_METHODS,
 	 ?AC_ALLOW_HEADERS, ?AC_MAX_AGE]).

 -define(HEADER,
-	[?CT_XML, ?AC_ALLOW_ORIGIN, ?AC_ALLOW_HEADERS]).
+	[?CT_XML, ?AC_ALLOW_ORIGIN, ?AC_ALLOW_HEADERS, ?NO_CACHE]).
@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,15 +12,18 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

 -include("ns.hrl").
-include("xml.hrl").
+-ifdef(NO_EXT_LIB).
+-include("fxml.hrl").
+-else.
+-include_lib("fast_xml/include/fxml.hrl").
+-endif.

 -define(STANZA_ERROR(Code, Type, Condition),
 	#xmlel{name = <<"error">>,
@@ -472,10 +475,10 @@

 -type(iq() :: iq_request() | iq_reply()).

-record(rsm_in, {max :: integer(),
+-record(rsm_in, {max :: integer() | error,
                 direction :: before | aft,
                 id :: binary(),
-                 index :: integer()}).
+                 index :: integer() | error}).

 -record(rsm_out, {count :: integer(),
                  index :: integer(),
@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,15 +12,12 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------
 -define(PRINT(Format, Args), io:format(Format, Args)).
-
-ifdef(LAGER).
 -compile([{parse_transform, lager_transform}]).

 -define(DEBUG(Format, Args),
@@ -37,21 +34,3 @@

 -define(CRITICAL_MSG(Format, Args),
 	lager:critical(Format, Args)).
-
-else.
-
-define(DEBUG(Format, Args),
-	p1_logger:debug_msg(?MODULE, ?LINE, Format, Args)).
-
-define(INFO_MSG(Format, Args),
-	p1_logger:info_msg(?MODULE, ?LINE, Format, Args)).
-
-define(WARNING_MSG(Format, Args),
-	p1_logger:warning_msg(?MODULE, ?LINE, Format, Args)).
-
-define(ERROR_MSG(Format, Args),
-	p1_logger:error_msg(?MODULE, ?LINE, Format, Args)).
-
-define(CRITICAL_MSG(Format, Args),
-	p1_logger:critical_msg(?MODULE, ?LINE, Format, Args)).
-endif.
@@ -0,0 +1,33 @@
+%%%----------------------------------------------------------------------
+%%% File    : mod_muc.hrl
+%%%
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
+%%%
+%%% This program is free software; you can redistribute it and/or
+%%% modify it under the terms of the GNU General Public License as
+%%% published by the Free Software Foundation; either version 2 of the
+%%% License, or (at your option) any later version.
+%%%
+%%% This program is distributed in the hope that it will be useful,
+%%% but WITHOUT ANY WARRANTY; without even the implied warranty of
+%%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+%%% General Public License for more details.
+%%%
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+%%%
+%%%----------------------------------------------------------------------
+
+-record(muc_room, {name_host = {<<"">>, <<"">>} :: {binary(), binary()} |
+                                                   {'_', binary()},
+                   opts = [] :: list() | '_'}).
+
+-record(muc_online_room,
+        {name_host = {<<"">>, <<"">>} :: {binary(), binary()} | '$1' |
+                                         {'_', binary()} | '_',
+         pid = self() :: pid() | '$2' | '_' | '$1'}).
+
+-record(muc_registered,
+        {us_host = {{<<"">>, <<"">>}, <<"">>} :: {{binary(), binary()}, binary()} | '$1',
+         nick = <<"">> :: binary()}).
@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,13 +12,14 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

+-include("ejabberd.hrl").
+
 -define(MAX_USERS_DEFAULT, 200).

 -define(SETS, gb_sets).
@@ -27,7 +28,7 @@

 -record(lqueue,
 {
-    queue :: queue(),
+    queue :: ?TQUEUE,
    len :: integer(),
    max :: integer()
 }).
@@ -55,11 +56,15 @@
    password_protected                   = false :: boolean(),
    password                             = <<"">> :: binary(),
    anonymous                            = true :: boolean(),
+    presence_broadcast                   = [moderator, participant, visitor] ::
+          [moderator | participant | visitor],
    allow_voice_requests                 = true :: boolean(),
    voice_request_min_interval           = 1800 :: non_neg_integer(),
    max_users                            = ?MAX_USERS_DEFAULT :: non_neg_integer() | none,
    logging                              = false :: boolean(),
-    captcha_whitelist                    = (?SETS):empty() :: gb_set()
+    vcard                                = <<"">> :: binary(),
+    captcha_whitelist                    = (?SETS):empty() :: ?TGB_SET,
+    mam                                  = false :: boolean()
 }).

 -type config() :: #config{}.
@@ -92,24 +97,24 @@
    access                  = {none,none,none,none} :: {atom(), atom(), atom(), atom()},
    jid                     = #jid{} :: jid(),
    config                  = #config{} :: config(),
-    users                   = (?DICT):new() :: dict(),
+    users                   = (?DICT):new() :: ?TDICT,
    last_voice_request_time = treap:empty() :: treap:treap(),
-    robots                  = (?DICT):new() :: dict(),
-    nicks                   = (?DICT):new() :: dict(),
-    affiliations            = (?DICT):new() :: dict(),
+    robots                  = (?DICT):new() :: ?TDICT,
+    nicks                   = (?DICT):new() :: ?TDICT,
+    affiliations            = (?DICT):new() :: ?TDICT,
    history                 :: lqueue(),
    subject                 = <<"">> :: binary(),
    subject_author          = <<"">> :: binary(),
    just_created            = false :: boolean(),
    activity                = treap:empty() :: treap:treap(),
    room_shaper             = none :: shaper:shaper(),
-    room_queue              = queue:new() :: queue()
+    room_queue              = queue:new() :: ?TQUEUE
 }).

 -record(muc_online_users, {us = {<<>>, <<>>} :: {binary(), binary()},
                           resource = <<>> :: binary() | '_',
-                           room = <<>> :: binary() | '_',
-                           host = <<>> :: binary() | '_'}).
+                           room = <<>> :: binary() | '_' | '$1',
+                           host = <<>> :: binary() | '_' | '$2'}).

 -type muc_online_users() :: #muc_online_users{}.

@@ -0,0 +1,11 @@
+-record(offline_msg,
+	{us = {<<"">>, <<"">>} :: {binary(), binary()},
+	 timestamp = now()     :: erlang:timestamp() | '_',
+	 expire = now()        :: erlang:timestamp() | never | '_',
+	 from = #jid{}         :: jid() | '_',
+	 to = #jid{}           :: jid() | '_',
+	 packet = #xmlel{}     :: xmlel() | '_'}).
+
+-record(state,
+	{host = <<"">> :: binary(),
+	 access_max_offline_messages}).
@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -2,7 +2,7 @@
 %%% RFC 1928 constants.
 %%%
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -14,10 +14,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -1,6 +1,6 @@
 %%%----------------------------------------------------------------------
 %%%
-%%% ejabberd, Copyright (C) 2002-2013   ProcessOne
+%%% ejabberd, Copyright (C) 2002-2016   ProcessOne
 %%%
 %%% This program is free software; you can redistribute it and/or
 %%% modify it under the terms of the GNU General Public License as
@@ -12,10 +12,9 @@
 %%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 %%% General Public License for more details.
 %%%
-%%% You should have received a copy of the GNU General Public License
-%%% along with this program; if not, write to the Free Software
-%%% Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
-%%% 02111-1307 USA
+%%% You should have received a copy of the GNU General Public License along
+%%% with this program; if not, write to the Free Software Foundation, Inc.,
+%%% 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 %%%
 %%%----------------------------------------------------------------------

@@ -36,13 +35,12 @@
 -define(NS_BLOCKING, <<"urn:xmpp:blocking">>).
 -define(NS_PRIVATE, <<"jabber:iq:private">>).
 -define(NS_VERSION, <<"jabber:iq:version">>).
-define(NS_TIME90, <<"jabber:iq:time">>).
 -define(NS_TIME, <<"urn:xmpp:time">>).
 -define(NS_LAST, <<"jabber:iq:last">>).
 -define(NS_XDATA, <<"jabber:x:data">>).
 -define(NS_IQDATA, <<"jabber:iq:data">>).
-define(NS_DELAY91, <<"jabber:x:delay">>).
 -define(NS_DELAY, <<"urn:xmpp:delay">>).
+-define(NS_HINTS, <<"urn:xmpp:hints">>).
 -define(NS_EXPIRE, <<"jabber:x:expire">>).
 -define(NS_EVENT, <<"jabber:x:event">>).
 -define(NS_CHATSTATES,
@@ -133,6 +131,7 @@
 -define(NS_FEATURE_COMPRESS,
 	<<"http://jabber.org/features/compress">>).
 -define(NS_FEATURE_MSGOFFLINE, <<"msgoffline">>).
+-define(NS_FLEX_OFFLINE, <<"http://jabber.org/protocol/offline">>).
 -define(NS_COMPRESS,
 	<<"http://jabber.org/protocol/compress">>).
 -define(NS_CAPS, <<"http://jabber.org/protocol/caps">>).
@@ -143,4 +142,25 @@
 -define(NS_CAPTCHA, <<"urn:xmpp:captcha">>).
 -define(NS_MEDIA, <<"urn:xmpp:media-element">>).
 -define(NS_BOB, <<"urn:xmpp:bob">>).
+-define(NS_MAM_TMP, <<"urn:xmpp:mam:tmp">>).
+-define(NS_MAM_0, <<"urn:xmpp:mam:0">>).
+-define(NS_MAM_1, <<"urn:xmpp:mam:1">>).
+-define(NS_SID_0, <<"urn:xmpp:sid:0">>).
 -define(NS_PING, <<"urn:xmpp:ping">>).
+-define(NS_CARBONS_2, <<"urn:xmpp:carbons:2">>).
+-define(NS_CARBONS_1, <<"urn:xmpp:carbons:1">>).
+-define(NS_FORWARD, <<"urn:xmpp:forward:0">>).
+-define(NS_CLIENT_STATE,  <<"urn:xmpp:csi:0">>).
+-define(NS_STREAM_MGMT_2,  <<"urn:xmpp:sm:2">>).
+-define(NS_STREAM_MGMT_3,  <<"urn:xmpp:sm:3">>).
+-define(NS_HTTP_UPLOAD, <<"urn:xmpp:http:upload">>).
+-define(NS_HTTP_UPLOAD_OLD, <<"eu:siacs:conversations:http:upload">>).
+-define(NS_THUMBS_1, <<"urn:xmpp:thumbs:1">>).
+-define(NS_NICK,  <<"http://jabber.org/protocol/nick">>).
+-define(NS_MIX_0, <<"urn:xmpp:mix:0">>).
+-define(NS_MIX_SERVICEINFO_0, <<"urn:xmpp:mix:0#serviceinfo">>).
+-define(NS_MIX_NODES_MESSAGES, <<"urn:xmpp:mix:nodes:messages">>).
+-define(NS_MIX_NODES_PRESENCE, <<"urn:xmpp:mix:nodes:presence">>).
+-define(NS_MIX_NODES_PARTICIPANTS, <<"urn:xmpp:mix:nodes:participants">>).
+-define(NS_MIX_NODES_SUBJECT, <<"urn:xmpp:mix:nodes:subject">>).
+-define(NS_MIX_NODES_CONFIG, <<"urn:xmpp:mix:nodes:config">>).
@@ -13,20 +13,21 @@
 %%% 
 %%%
 %%% The Initial Developer of the Original Code is ProcessOne.
-%%% Portions created by ProcessOne are Copyright 2006-2013, ProcessOne
+%%% Portions created by ProcessOne are Copyright 2006-2016, ProcessOne
 %%% All Rights Reserved.''
-%%% This software is copyright 2006-2013, ProcessOne.
+%%% This software is copyright 2006-2016, ProcessOne.
 %%%
 %%%
-%%% copyright 2006-2013 ProcessOne
+%%% copyright 2006-2016 ProcessOne
 %%%
 %%% This file contains pubsub types definition.
 %%% ====================================================================

+-include("ejabberd.hrl").
+
 %% -------------------------------
 %% Pubsub constants
-define(ERR_EXTENDED(E, C),
-	mod_pubsub:extended_error(E, C)).
+-define(ERR_EXTENDED(E, C), mod_pubsub:extended_error(E, C)).

 %% The actual limit can be configured with mod_pubsub's option max_items_node
 -define(MAXITEMS, 10).
@@ -38,7 +39,6 @@
 %% -------------------------------
 %% Pubsub types

-%% @type hostPubsub() = string().
 -type(hostPubsub() :: binary()).
 %% <p><tt>hostPubsub</tt> is the name of the PubSub service. For example, it can be
 %% <tt>"pubsub.localhost"</tt>.</p>
@@ -57,12 +57,15 @@
 -type(nodeId() :: binary()).
 %% @type nodeId() = binary().
 %% <p>A node is defined by a list of its ancestors. The last element is the name
-%% of the current node. For example: 
 %% of the current node. For example:
 %% ```<<"/home/localhost/user">>'''</p>

-type(nodeIdx() :: pos_integer()).
-%% @type nodeIdx() = integer().
+-type(nodeIdx() :: pos_integer() | binary()).
+%% @type nodeIdx() = integer() | binary().
+%% note: pos_integer() should always be used, but we allow anything else coded
+%% as binary, so one can have a custom implementation of nodetree with custom
+%% indexing (see nodetree_virtual). this also allows to use any kind of key for
+%% indexing nodes, as this can be usefull with external backends such as odbc.

 -type(itemId() :: binary()).
 %% @type itemId() = string().
@@ -70,28 +73,12 @@
 -type(subId() :: binary()).
 %% @type subId() = string().

-
-%% @type payload() = [#xmlelement{} | #xmlcdata{}].
-
-%% @type stanzaError() = #xmlelement{}.
-%% Example: 
-%% Example:
-%%    ```{xmlelement, "error",
-%%        [{"code", Code}, {"type", Type}],
-%%        [{xmlelement, Condition, [{"xmlns", ?NS_STANZAS}], []}]}'''
-%% @type pubsubIQResponse() = #xmlelement{}.
-%% Example:
-%%    ```{xmlelement, "pubsub",
-%%               [{"xmlns", ?NS_PUBSUB_EVENT}],
-%%               [{xmlelement, "affiliations", [],
-%%               []}]}'''
-
 -type(nodeOption() ::
    {Option::atom(),
-     Value::binary() | [binary()] | boolean() | non_neg_integer()
+     Value::atom() | [binary()] | boolean() | non_neg_integer()
 }).

-type(nodeOptions() :: [NodeOption::mod_pubsub:nodeOption(),...]).
+-type(nodeOptions() :: [mod_pubsub:nodeOption(),...]).

 %% @type nodeOption() = {Option, Value}
 %%    Option = atom()
@@ -104,31 +91,14 @@
     Value::binary() | [binary()] | boolean()
 }).

-type(subOptions() :: [SubOption::mod_pubsub:subOption(),...]).
+-type(subOptions() :: [mod_pubsub:subOption(),...]).

-%% @type nodeType() = string().
-%% <p>The <tt>nodeType</tt> is a string containing the name of the PubSub
-%% plugin to use to manage a given node. For example, it can be
-%% <tt>"flat"</tt>, <tt>"hometree"</tt> or <tt>"blog"</tt>.</p>

-%% @type jid() = {jid, User, Server, Resource, LUser, LServer, LResource}
-%%    User      = string()
-%%    Server    = string()
-%%    Resource  = string()
-%%    LUser     = string()
-%%    LServer   = string()
-%%    LResource = string().
-
-%-type(ljid() :: {binary(), binary(), binary()}).
-%% @type ljid() = {User, Server, Resource}
-%%     User     = string()
-%%     Server   = string()
-%%     Resource = string().

 -type(affiliation() :: 'none'
                     | 'owner'
                     | 'publisher'
-                    %| 'publish-only'
+                     | 'publish_only'
                     | 'member'
                     | 'outcast'
 ).
@@ -149,16 +119,11 @@
 ).
 %% @type accessModel() = 'open' | 'presence' | 'roster' | 'authorize' | 'whitelist'.

-%% @type pubsubIndex() = {pubsub_index, Index, Last, Free}
-%%    Index = atom()
-%%    Last  = integer()
-%%    Free  = [integer()].
-%% internal pubsub index table
 -type(publishModel() :: 'publishers'
                      | 'subscribers'
                      | 'open'
 ).
-
+%% @type publishModel() = 'publishers' | 'subscribers' | 'open'

 -record(pubsub_index,
 {
@@ -167,91 +132,42 @@
    free  :: [mod_pubsub:nodeIdx()]
 }).

-%% @type pubsubNode() = {pubsub_node, NodeId, Id, Parents, Type, Owners, Options}
-%%    NodeId  = {host() | ljid(), nodeId()}
-%%    Id      = nodeIdx()
-%%    Parents = [nodeId()]
-%%    Type    = nodeType()
-%%    Owners  = [ljid()]
-%%    Options = [nodeOption()].
-%% <p>This is the format of the <tt>nodes</tt> table. The type of the table
-%% is: <tt>set</tt>,<tt>ram/disc</tt>.</p>
-%% <p>The <tt>Parents</tt> and <tt>type</tt> fields are indexed.</p>
-%% <tt>id</tt> can be anything you want.
 -record(pubsub_node,
 {
-    nodeid               ,%:: {Host::mod_pubsub:host(), NodeId::mod_pubsub:nodeId()},
-    id                   ,%:: mod_pubsub:nodeIdx(),
-    parents = []         ,%:: [Parent_NodeId::mod_pubsub:nodeId()],
-    type    = <<"flat">> ,%:: binary(),
-    owners  = []         ,%:: [Owner::ljid(),...],
-    options = []          %:: mod_pubsub:nodeOptions()
+    nodeid              ,% :: {mod_pubsub:host(), mod_pubsub:nodeId()},
+    id                  ,% :: mod_pubsub:nodeIdx(),
+    parents = []        ,% :: [mod_pubsub:nodeId(),...],
+    type    = <<"flat">>,% :: binary(),
+    owners  = []        ,% :: [jlib:ljid(),...],
+    options = []        % :: mod_pubsub:nodeOptions()
 }).

-%% @type pubsubState() = {pubsub_state, StateId, Items, Affiliation, Subscriptions}
-%%    StateId       = {ljid(), nodeIdx()}
-%%    Items         = [itemId()]
-%%    Affiliation   = affiliation()
-%%    Subscriptions = [{subscription(), subId()}].
-%% <p>This is the format of the <tt>affiliations</tt> table. The type of the
-%% table is: <tt>set</tt>,<tt>ram/disc</tt>.</p>
-
-%-record(pubsub_state,
-%	{stateid, items = [], affiliation = none,
-%	 subscriptions = []}).
 -record(pubsub_state,
 {
-    stateid                ,%:: {Entity::ljid(), NodeIdx::mod_pubsub:nodeIdx()},
-    items         = []     ,%:: [ItemId::mod_pubsub:itemId()],
-    affiliation   = 'none' ,%:: mod_pubsub:affiliation(),
-    subscriptions = []      %:: [{mod_pubsub:subscription(), mod_pubsub:subId()}]
+    stateid               ,% :: {jlib:ljid(), mod_pubsub:nodeIdx()},
+    items         = []    ,% :: [mod_pubsub:itemId(),...],
+    affiliation   = 'none',% :: mod_pubsub:affiliation(),
+    subscriptions = []    % :: [{mod_pubsub:subscription(), mod_pubsub:subId()}]
 }).

-%% @type pubsubItem() = {pubsub_item, ItemId, Creation, Modification, Payload}
-%%    ItemId       = {itemId(), nodeIdx()}
-%%    Creation     = {now(), ljid()}
-%%    Modification = {now(), ljid()}
-%%    Payload      = payload().
-%% <p>This is the format of the <tt>published items</tt> table. The type of the
-%% table is: <tt>set</tt>,<tt>disc</tt>,<tt>fragmented</tt>.</p>
-%-record(pubsub_item,
-%	{itemid, creation = {unknown, unknown},
-%	 modification = {unknown, unknown}, payload = []}).
-
 -record(pubsub_item,
 {
-    itemid                            ,%:: {mod_pubsub:itemId(), mod_pubsub:nodeIdx()},
-    creation     = {unknown, unknown} ,%:: {erlang:timestamp(), ljid()},
-    modification = {unknown, unknown} ,%:: {erlang:timestamp(), ljid()},
-    payload      = []                  %:: mod_pubsub:payload()
+    itemid                           ,% :: {mod_pubsub:itemId(), mod_pubsub:nodeIdx()},
+    creation     = {unknown, unknown},% :: {erlang:timestamp(), jlib:ljid()},
+    modification = {unknown, unknown},% :: {erlang:timestamp(), jlib:ljid()},
+    payload      = []                % :: mod_pubsub:payload()
 }).

-%% @type pubsubSubscription() = {pubsub_subscription, SubId, Options}
-%%     SubId     = subId()
-%%     Options   = [nodeOption()].
-%% <p>This is the format of the <tt>subscriptions</tt> table. The type of the
-%% table is: <tt>set</tt>,<tt>ram/disc</tt>.</p>
-%-record(pubsub_subscription, {subid, options}).
 -record(pubsub_subscription,
 {
-    subid   ,%:: mod_pubsub:subId(),
-    options  %:: [] | mod_pubsub:subOptions()
+    subid        ,% :: mod_pubsub:subId(),
+    options = [] % :: mod_pubsub:subOptions()
 }).

-%% @type pubsubLastItem() = {pubsub_last_item, NodeId, ItemId, Creation, Payload}
-%%    NodeId   = nodeIdx()
-%%    ItemId   = itemId()
-%%    Creation = {now(),ljid()}
-%%    Payload  = payload().
-%% <p>This is the format of the <tt>last items</tt> table. it stores last item payload
-%% for every node</p>
-%-record(pubsub_last_item,
-%	{nodeid, itemid, creation, payload}).
-
 -record(pubsub_last_item,
 {
-    nodeid   ,%:: mod_pubsub:nodeIdx(),
-    itemid   ,%:: mod_pubsub:itemId(),
-    creation ,%:: {erlang:timestamp(), ljid()},
-    payload   %:: mod_pubsub:payload()
+    nodeid   ,% :: mod_pubsub:nodeIdx(),
+    itemid   ,% :: mod_pubsub:itemId(),
+    creation ,% :: {erlang:timestamp(), jlib:ljid()},
+    payload  % :: mod_pubsub:payload()
 }).
@@ -0,0 +1,13 @@
+defmodule Ejabberd.Hooks do
+
+  # Generic hook setting features
+  def add(hook_name, host, module, function, priority) do
+    :ejabberd_hooks.add(hook_name, host, module, function, priority)
+  end
+
+  # Should be named 'removed'
+  def delete(hook_name, host, module, function, priority) do
+    :ejabberd_hooks.delete(hook_name, host, module, function, priority)
+  end
+
+end
@@ -0,0 +1,9 @@
+defmodule Ejabberd.Logger do
+
+  def critical(message, args \\ []), do: :lager.log(:critical, [], message, args)
+  def error(message, args \\ []),    do: :lager.log(:error, [], message, args)
+  def warning(message, args \\ []),  do: :lager.log(:warning, [], message, args)
+  def info(message, args \\ []),     do: :lager.log(:info, [], message, args)
+  def debug(message, args \\ []),    do: :lager.log(:debug, [], message, args)
+
+end
@@ -0,0 +1,21 @@
+defmodule ModPresenceDemo do
+  import Ejabberd.Logger # this allow using info, error, etc for logging
+  @behaviour :gen_mod
+
+  def start(host, _opts) do
+    info('Starting ejabberd module Presence Demo')
+    Ejabberd.Hooks.add(:set_presence_hook, host, __ENV__.module, :on_presence, 50)
+    :ok
+  end
+  
+  def stop(host) do
+    info('Stopping ejabberd module Presence Demo')
+    Ejabberd.Hooks.delete(:set_presence_hook, host, __ENV__.module, :on_presence, 50)
+    :ok
+  end
+  
+  def on_presence(user, _server, _resource, _packet) do
+    info('Receive presence for #{user}')
+    :none
+  end 
+end
@@ -0,0 +1,156 @@
+# ===========================================================================
+#      http://www.gnu.org/software/autoconf-archive/ax_lib_sqlite3.html
+# ===========================================================================
+#
+# SYNOPSIS
+#
+#   AX_LIB_SQLITE3([MINIMUM-VERSION])
+#
+# DESCRIPTION
+#
+#   Test for the SQLite 3 library of a particular version (or newer)
+#
+#   This macro takes only one optional argument, required version of SQLite
+#   3 library. If required version is not passed, 3.0.0 is used in the test
+#   of existance of SQLite 3.
+#
+#   If no intallation prefix to the installed SQLite library is given the
+#   macro searches under /usr, /usr/local, and /opt.
+#
+#   This macro calls:
+#
+#     AC_SUBST(SQLITE3_CFLAGS)
+#     AC_SUBST(SQLITE3_LDFLAGS)
+#     AC_SUBST(SQLITE3_VERSION)
+#
+#   And sets:
+#
+#     HAVE_SQLITE3
+#
+# LICENSE
+#
+#   Copyright (c) 2008 Mateusz Loskot <mateusz@loskot.net>
+#
+#   Copying and distribution of this file, with or without modification, are
+#   permitted in any medium without royalty provided the copyright notice
+#   and this notice are preserved. This file is offered as-is, without any
+#   warranty.
+
+#serial 14
+
+AC_DEFUN([AX_LIB_SQLITE3],
+[
+    AC_ARG_WITH([sqlite3],
+        AS_HELP_STRING(
+            [--with-sqlite3=@<:@ARG@:>@],
+            [use SQLite 3 library @<:@default=yes@:>@, optionally specify the prefix for sqlite3 library]
+        ),
+        [
+        if test "$withval" = "no"; then
+            WANT_SQLITE3="no"
+        elif test "$withval" = "yes"; then
+            WANT_SQLITE3="yes"
+            ac_sqlite3_path=""
+        else
+            WANT_SQLITE3="yes"
+            ac_sqlite3_path="$withval"
+        fi
+        ],
+        [WANT_SQLITE3="yes"]
+    )
+
+    SQLITE3_CFLAGS=""
+    SQLITE3_LDFLAGS=""
+    SQLITE3_VERSION=""
+
+    if test "x$WANT_SQLITE3" = "xyes"; then
+
+        ac_sqlite3_header="sqlite3.h"
+
+        sqlite3_version_req=ifelse([$1], [], [3.0.0], [$1])
+        sqlite3_version_req_shorten=`expr $sqlite3_version_req : '\([[0-9]]*\.[[0-9]]*\)'`
+        sqlite3_version_req_major=`expr $sqlite3_version_req : '\([[0-9]]*\)'`
+        sqlite3_version_req_minor=`expr $sqlite3_version_req : '[[0-9]]*\.\([[0-9]]*\)'`
+        sqlite3_version_req_micro=`expr $sqlite3_version_req : '[[0-9]]*\.[[0-9]]*\.\([[0-9]]*\)'`
+        if test "x$sqlite3_version_req_micro" = "x" ; then
+            sqlite3_version_req_micro="0"
+        fi
+
+        sqlite3_version_req_number=`expr $sqlite3_version_req_major \* 1000000 \
+                                   \+ $sqlite3_version_req_minor \* 1000 \
+                                   \+ $sqlite3_version_req_micro`
+
+        AC_MSG_CHECKING([for SQLite3 library >= $sqlite3_version_req])
+
+        if test "$ac_sqlite3_path" != ""; then
+            ac_sqlite3_ldflags="-L$ac_sqlite3_path/lib"
+            ac_sqlite3_cppflags="-I$ac_sqlite3_path/include"
+        else
+            for ac_sqlite3_path_tmp in /usr /usr/local /opt ; do
+                if test -f "$ac_sqlite3_path_tmp/include/$ac_sqlite3_header" \
+                    && test -r "$ac_sqlite3_path_tmp/include/$ac_sqlite3_header"; then
+                    ac_sqlite3_path=$ac_sqlite3_path_tmp
+                    ac_sqlite3_cppflags="-I$ac_sqlite3_path_tmp/include"
+                    ac_sqlite3_ldflags="-L$ac_sqlite3_path_tmp/lib"
+                    break;
+                fi
+            done
+        fi
+
+        ac_sqlite3_ldflags="$ac_sqlite3_ldflags -lsqlite3"
+
+        saved_CPPFLAGS="$CPPFLAGS"
+        CPPFLAGS="$CPPFLAGS $ac_sqlite3_cppflags"
+
+        AC_LANG_PUSH(C)
+        AC_COMPILE_IFELSE(
+            [
+            AC_LANG_PROGRAM([[@%:@include <sqlite3.h>]],
+                [[
+#if (SQLITE_VERSION_NUMBER >= $sqlite3_version_req_number)
+/* Everything is okay */
+#else
+#  error SQLite version is too old
+#endif
+                ]]
+            )
+            ],
+            [
+            AC_MSG_RESULT([yes])
+            success="yes"
+            ],
+            [
+            AC_MSG_RESULT([not found])
+            success="no"
+            ]
+        )
+        AC_LANG_POP(C)
+
+        CPPFLAGS="$saved_CPPFLAGS"
+
+        if test "$success" = "yes"; then
+
+            SQLITE3_CFLAGS="$ac_sqlite3_cppflags"
+            SQLITE3_LDFLAGS="$ac_sqlite3_ldflags"
+
+            ac_sqlite3_header_path="$ac_sqlite3_path/include/$ac_sqlite3_header"
+
+            dnl Retrieve SQLite release version
+            if test "x$ac_sqlite3_header_path" != "x"; then
+                ac_sqlite3_version=`cat $ac_sqlite3_header_path \
+                    | grep '#define.*SQLITE_VERSION.*\"' | sed -e 's/.* "//' \
+                        | sed -e 's/"//'`
+                if test $ac_sqlite3_version != ""; then
+                    SQLITE3_VERSION=$ac_sqlite3_version
+                else
+                    AC_MSG_WARN([Cannot find SQLITE_VERSION macro in sqlite3.h header to retrieve SQLite version!])
+                fi
+            fi
+
+            AC_SUBST(SQLITE3_CFLAGS)
+            AC_SUBST(SQLITE3_LDFLAGS)
+            AC_SUBST(SQLITE3_VERSION)
+            AC_DEFINE([HAVE_SQLITE3], [], [Have the SQLITE3 library])
+        fi
+    fi
+])
@@ -84,3 +84,20 @@ EOF
 	   AC_MSG_RESULT([ok])
 	fi
 ]) dnl ERLANG_VERSION_CHECK
+
+AC_DEFUN([ERLANG_DEPRECATED_TYPES_CHECK],
+[		AC_MSG_CHECKING([whether Erlang is using deprecated types])
+		cat > conftest.erl <<EOF
+-module(conftest).
+
+-record(state, {host = dict:new() :: dict:dict()}).
+EOF
+
+	if $ERLC conftest.erl > /dev/null 2>&1; then
+	   AC_MSG_RESULT([no])
+	   AC_SUBST(erlang_deprecated_types, false)
+	else
+	   AC_MSG_RESULT([yes])
+	   AC_SUBST(erlang_deprecated_types, true)
+	fi
+])
@@ -0,0 +1,104 @@
+defmodule Ejabberd.Mixfile do
+  use Mix.Project
+
+  def project do
+    [app: :ejabberd,
+     version: "16.02.0",
+     description: description,
+     elixir: "~> 1.2",
+     elixirc_paths: ["lib"],
+     compile_path: ".",
+     compilers: [:asn1] ++ Mix.compilers,
+     erlc_options: erlc_options,
+     erlc_paths: ["asn1", "src"],
+     package: package,
+     deps: deps]
+  end
+
+  defp description do
+    """
+    Robust, ubiquitous and massively scalable Jabber / XMPP Instant Messaging platform.
+    """
+  end
+
+  def application do
+    [mod: {:ejabberd_app, []},
+     applications: [:ssl],
+     included_applications: [:lager, :mnesia, :p1_utils, :cache_tab,
+                             :fast_tls, :stringprep, :fast_xml,
+                             :stun, :fast_yaml, :ezlib, :iconv,
+                             :esip, :jiffy, :p1_oauth2, :p1_xmlrpc, :eredis,
+                             :p1_mysql, :p1_pgsql, :sqlite3]]
+  end
+
+  defp erlc_options do
+    # Use our own includes + includes from all dependencies
+    includes = ["include"] ++ Path.wildcard(Path.join("..", "/*/include"))
+    [:debug_info] ++ Enum.map(includes, fn(path) -> {:i, path} end)
+  end
+
+  defp deps do
+    [{:lager, "~> 3.0"},
+     {:p1_utils, "~> 1.0"},
+     {:cache_tab, "~> 1.0"},
+     {:stringprep, "~> 1.0"},
+     {:fast_yaml, "~> 1.0"},
+     {:fast_tls, "~> 1.0"},
+     {:fast_xml, "~> 1.1"},
+     {:stun, "~> 1.0"},
+     {:esip, "~> 1.0"},
+     {:jiffy, "~> 0.14.7"},
+     {:p1_oauth2, "~> 0.6.1"},
+     {:p1_xmlrpc, "~> 1.15"},
+     {:p1_mysql, "~> 1.0"},
+     {:p1_pgsql, "~> 1.0"},
+     {:sqlite3, "~> 1.1"},
+     {:ezlib, "~> 1.0"},
+     {:iconv, "~> 1.0"},
+     {:eredis, "~> 1.0"},
+     {:exrm, "~> 1.0.0-rc7", only: :dev}]
+  end
+
+  defp package do
+    [# These are the default files included in the package
+      files: ["lib", "src", "priv", "mix.exs", "include", "README.md", "COPYING"],
+      maintainers: ["ProcessOne"],
+      licenses: ["GPLv2"],
+      links: %{"Site" => "https://www.ejabberd.im",
+               "Documentation" => "http://docs.ejabberd.im",
+               "Source" => "https://github.com/processone/ejabberd",
+               "ProcessOne" => "http://www.process-one.net/"}]
+  end
+end
+
+defmodule Mix.Tasks.Compile.Asn1 do
+  use Mix.Task
+  alias Mix.Compilers.Erlang
+
+  @recursive true
+  @manifest ".compile.asn1"
+
+  def run(args) do
+    {opts, _, _} = OptionParser.parse(args, switches: [force: :boolean])
+
+    project      = Mix.Project.config
+    source_paths = project[:asn1_paths] || ["asn1"]
+    dest_paths    = project[:asn1_target] || ["src"]
+    mappings     = Enum.zip(source_paths, dest_paths)
+    options      = project[:asn1_options] || []
+
+    Erlang.compile(manifest(), mappings, :asn1, :erl, opts[:force], fn
+      input, output ->
+        options = options ++ [:noobj, outdir: Erlang.to_erl_file(Path.dirname(output))]
+        case :asn1ct.compile(Erlang.to_erl_file(input), options) do
+          :ok -> {:ok, :done}
+          error -> error
+        end
+    end)
+  end
+
+  def manifests, do: [manifest]
+  defp manifest, do: Path.join(Mix.Project.manifest_path, @manifest)
+
+  def clean, do: Erlang.clean(manifest())
+end
@@ -0,0 +1,26 @@
+%{"bbmustache": {:hex, :bbmustache, "1.0.4"},
+  "cache_tab": {:hex, :cache_tab, "1.0.2"},
+  "cf": {:hex, :cf, "0.2.1"},
+  "eredis": {:hex, :eredis, "1.0.8"},
+  "erlware_commons": {:hex, :erlware_commons, "0.19.0"},
+  "esip": {:hex, :esip, "1.0.2"},
+  "exrm": {:hex, :exrm, "1.0.3"},
+  "ezlib": {:hex, :ezlib, "1.0.1"},
+  "fast_tls": {:hex, :fast_tls, "1.0.1"},
+  "fast_xml": {:hex, :fast_xml, "1.1.11"},
+  "fast_yaml": {:hex, :fast_yaml, "1.0.3"},
+  "getopt": {:hex, :getopt, "0.8.2"},
+  "goldrush": {:hex, :goldrush, "0.1.7"},
+  "iconv": {:hex, :iconv, "1.0.0"},
+  "jiffy": {:hex, :jiffy, "0.14.7"},
+  "lager": {:hex, :lager, "3.0.2"},
+  "p1_mysql": {:hex, :p1_mysql, "1.0.1"},
+  "p1_oauth2": {:hex, :p1_oauth2, "0.6.1"},
+  "p1_pgsql": {:hex, :p1_pgsql, "1.1.0"},
+  "p1_utils": {:hex, :p1_utils, "1.0.3"},
+  "p1_xmlrpc": {:hex, :p1_xmlrpc, "1.15.1"},
+  "providers": {:hex, :providers, "1.6.0"},
+  "relx": {:hex, :relx, "3.18.0"},
+  "sqlite3": {:hex, :sqlite3, "1.1.5"},
+  "stringprep": {:hex, :stringprep, "1.0.3"},
+  "stun": {:hex, :stun, "1.0.1"}}
--- a/Show More
+++ b/Show More